Drain Cleaning Equipment & Accessories
General Pipe Cleaners Urinal Auger gets though urinals where other snakes can't. The specially designed spring has the toughness and flexibility to negotiate tight urinal bends. The Telescoping Urinal Auger features a 48 in. long cable for clearing stoppages beyond the urinal. Case pack of 6 included.
- No need to pull the urinal off the wall to clear the clog
- General's Flexicore cable installed
- Vinyl grip handle with grip clip for securing the cable and a rubber bumper to protect the urinal bowl
- Urinal Auger includes a rust resistant steel tube
- Easily opens clogged urinals
- Case pack of six
General's 25 ft. x 5/16 in. Flexicore cable for small drain lines. Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility. So tough it carries a one-year warranty against defect or breakage.
- For use in 1-1/2 in. - 3 in. lines
- Not for tree roots
- General's Flexicore cable with down head
- Snake-oil preserves and protects your sewer cables against rust and corrosion
- Down head easily guides the cable down through the trap
- No cutters needed
The Boring Gimlet is used for removing loose objects in the drain line. It easily fits into the female connector on 5/16 in. and 3/8 in. cables. The BG is also available in a variety of cutter sets.
- Open spring helps grab on to and remove loose objects
- Used on 5/16 in. and 3/8 in. diameter cable
- Effective in 1-1/2 in. to 3 in. lines
- Cutters are subject to severe wear and are repaired or replaced within one year only if a flaw in the material causes breakage
- E-coated to protect against rust
- Simple and easy to use
The Down Head Boring Gimlet is used for removing loose objects in the drain line. Its design allows it to go down the waste and not up the stack. Easily fits into the female connector on 5/16 in. and 3/8 in. cables.
- Open spring helps grab onto and remove loose objects
- Goes down waste, not up stack
- Used on 5/16 in. and 3/8 in. cable diameters
- Effective in 1-1/2 in. to 3 in. lines
- Cutters are subject to severe wear and are repaired or replaced within 1 year only if a flaw in the material causes breakage
- Snake-oil preserves and protects your sewer cables against rust and corrosion
The RS-TU4 is a replacement cable for the TU4 urinal auger. The RS-TU4 replacement cable is quick and easy to replace. The specially designed spring has the toughness and flexibility to negotiate tight urinal bends.
- 48 in. spring especially coiled for clearing urinals
- Easily replaceable super-flex cable
- Spring telescopes from guide tube to clear stoppage beyond urinal
- Use the grip clip to secure the cable to the cable when not in use
- General's flexicore cable
- Comes ready to install
We have miniaturized our big machine power cable feed and put it on the Super-Vee to give you feeding speed and convenience you haven't seen before in a hand-held power drain cleaner. In tight or awkward places, the Power-Vee is like having an extra-hand. To feed the cable just start the Power-Vee and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever.
- For 1-1/4 in. to 3 in. drain lines
- 25 ft. x 5/16 in. Flexicore cable installed
- For sinks, tubs and laundry drains
- Slide-action chuck built into grip shield
- Quick-change cartridge makes switching cables clean and easy
- Without carrying case
The MRCS cutter set is used for General's Mini-Rooter line of drain cleaners. This cutter set is perfect for opening small drain lines. For use on General's cables.
- For 2 in. - 3 in. drain lines
- Mini-rooter cutter set (includes Arrow Head, 1-1/2 in. U-Cutter, 2 in. Side Cutter Blade and Boring Gimlet)
- For 5/16 in. 3/8 in. and 1/2 in. cables
- E-coated to protect against rust
- For commercial and residential use
- Perfect for kitchen sinks, bathroom sinks and tubs, laundry tubs
The 15R10 is an open wound, 7/8 in. x 15 ft. sectional cable with 'R' connectors. (For use with RIDGID style machines). Just connect a cable as you need it and keep moving through the pipe until you hit the clog.
- For 4" -10" drain lines
- Cables are 15 ft. x 7/8 in., open wound sectionals
- Durable and easy to connect
- Use only with 'R' style cutters
- Use with General's Rodrunner
- Cable carrier is available
We have miniaturized our big machine power cable feed and put it on the Super-Vee to give you feeding speed and convenience you haven't seen before in a hand-held power drain cleaner. In tight or awkward places, the Power-Vee is like having an extra-hand. To feed the cable just start the Power-Vee and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever. Unit comes with a 50 ft. x 1/4 in. and 35 ft. x 3/8 in. cables.
- For 1-1/2 in. to 3 in. drain lines
- Cutter set included
- For sinks, tubs and laundry drains
- Quick-change cartridge makes switching cables clean and easy
- Unique dyna-thrust bearing system for longer tool life
- Carrying case included
The Mini-Rooter XP gives you extra portability because 8 in. semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 HP motor when going up or down stairs.
- For 2 in. - 4 in. drain lines
- 75 ft. x 3/8 in. Flexicore cable installed
- 1/3 HP motor
- With power cable feed
- Integral distributor tube to help prevent cable tangling
- Cutter set included
The Mini-Rooter Pro clears drains from rooftop to basement, including kitchen, bath, and laundry drains. And its portable too: Built-in wheels make it easier for you to transport the Pro to and from the job, and the folding handle allows for compact storage in your truck. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few ft. so you finish quicker. The Mini-Rooter Pro includes these safety features: A foot pedal that uses air pressure to start and stop the machines with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
- For 2" to 3" drain lines
- Comes complete with 75 ft. by 3/8 in. Flexicore cable installed and cutter set.
- Built in wheels make it easier for you to transport the unit to and from the job
- Folding handle allows for compact storage in your truck or car
- Easily removable drum gives you more portability, or freedom to quickly switch to a different diameter cable
- Power cord has a built in GFCI
Equipped with a variable speed power cable feed and variable speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier. The Drain-Rooter PH is a real labor-saver on long jobs or when working in a cramped area where the weight of the machine could get burdensome. Variable speed power cable feed drives and retrieves cable at up to 16 ft. per minute.
- For 1-1/4 in. to 3 in. drain lines
- 4 ft. guide hose eliminates cable whipping, dirty fixtures and messy floors
- Drum speed can be varied by changing the pressure on the foot pedal
- Can be operated in both horizontal and vertical positions to get closer to the drain opening
- Quick-change cartridge makes switching cables clean and easy
- Flexicore wire rope center cables have unequaled strength yet the right amount of flexibility
The 100EM2 is 100 ft. x 38 in. Flexicore cable with male and female connectors. So tough it carries a 1-year warranty against defect or breakage. For small drain lines.
- For use in 1-1/2" to 3" drain lines
- Perfect for kitchen and bathroom sinks and tubs
- Not for tree roots
- Has a male and a female connector
- The HECS cutter set fits this cable perfectly
- Carries a on-year limited warranty against breakage
General's 100EM3 FLEXICORE Cable is made with heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility. So tough it carries a one-year warranty against defect or breakage.
- For 2" to 3" drain lines
- 100 ft. x 1/2 in. Flexicore cable
- Great for kitchen sinks, bathroom sinks and tubs, laundry tubs
- Male and female quick fixes available
- Use with General's cutters
- General's Snake Oil is great to prevent rust and deodorize your cable
1/4 in. x 50 ft. Flexicore cable for the Handy, Spin-Thru and Spin-Drive manual feed drain cleaners. General's Flexicore wire rope center cables are coiled tightly over a core of aircraft-type wire rope then heat-treated. This process gives this cable it's outstanding strength without sacrificing flexibility.
- For use in 1-1/4 in. - 2 in. drain lines
- Right hand wound cable for manual use
- Attached Down head easily guides the cable down the drain
- Not for roots
- Handle is sold separately
- Easily unstops sink, shower, toilet, and laundry drain lines from 1-1/4 in. to 3 in. in diameter
The Mini-Rooter XP gives you extra portability because 8 in. semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. Unit comes complete and ready to use.
- For 2 in. - 4 in. drain lines
- Comes with a 75 ft. x 1/2 in. Flexicore cable installed
- Roll bar protects the 1/3 HP motor when going up or down stairs
- Power cord and foot pedal can be stowed away on convenient cord wraps
- Inner drum cage prevents cable tangling under load
- Cutter set included
The down head fitting is designed to convert standard cutters into down head cutters. Attach the down head fitting to the female end of the cable and attach your cutter. Easy to attach.
- For 1-1/4 in. - 2 in. drain lines
- For use in 5/16 in. and 3/8 in. drain cables
- Strong and durable
- Easily attaches with a screwdriver
- Helps to guide the cable down to the stoppage, not up toward the stack
- Screw to attached cutter is included
The Arrow Head is used as a starting drill. It gets the water flowing. It easily fits into the female connector on 5/16 in., 3/8 in., 1/2 in., and 9/16 in. cables. Also available in a cutter set.
- For 2 in. - 3 in. drain lines
- Use as a starting drill to get water flowing through the pipe
- Not for tree roots
- Attaches to General's cables
- Is available in the HECS cutter set
- Easy to use starting drill
General's Flexible Arrow Head is the regular Arrow Head only smaller and attached to a spring for flexibility. The Flexible Arrow Head is great for opening small drain lines. A must have for hand held drain cleaners. The down head fitting pulls the cable downward in the pipe instead of up the stack. Easily retrieves loose objects.
- For 1-1/4 in. - 2 in. drain lines
- Starting drill (for sharp turns in small lines)
- Perfect for kitchen sinks, bathroom sinks and tubs, laundry tub
- Acts like a leader for sharp bends in pipes
- E-coated to protect against rust
- For use on 5/16 in. and 3/8 in. cables
General's JRCS cutter set is part of the Sewerooter T-3 packages. The cutters in this set cover a wide range of applications in small to medium drain lines. Durable and easy to use.
- For 2 in. 4 in. drain lines
- For 3/8 in. and 1/2 in. cables
- Junior cutter set (includes arrow head, 1-1/2 u-cutter, 2 & 3 side cutter blade, 3 rotary saw blade, small retieving tool and 13 flexible leader)
- Easily attaches to the female end of the cable
- Wide range of sises, from the smaller arrow head to the 3 in. rotary saw blade
- E-coated (except for the LE-1) to protect from rust
General's R-10CS 6-piece cutter set with 'R' connectors for 7/8 in. sectional cables (Compatible with Ridgid cables). Tough and durable, this cutter set will cut through most stoppages. Easy to install.
- For 3 in. to 4 in. drain lines
- Great for roof vents
- Cable stops rotating the cutter as soon as you lift the handle, so there's no additional torque buildup
- E-coated to help prevent rust
- Coupling key included
- Compatible with Ridgid cables
The SRCS cutter set covers a wide range of applications for the 5/8 in. to 3/4 in. drain cable. From the Spear Head to the Retriever tool, this cutter set has it all. No coupling key needed to install cutters.
- For general cables
- Use the large retrieving tool to pull large objects out of the drain line
- E-coated to help prevent rust
- Spear head is galvanized to help prevent rust
- RTR-1 is made of high carbon spring steel
- Cutters available separately
The lightweight, compact JM1000 Mini-Jet gives you 1500 psi of cleaning power. Water jets use a stream of high pressure water hitting the stoppage and flushes it away. The pump and motor assembly are safely contained in a rugged metal diamond plate case that can handle abuse in the field.
- For 1-1/2 in. - 3 in. drain lines
- Thrust of the nozzle drives the hose down the line and gives you wall to wall cleaning action
- Pulse helps the hose slide around tight bends and farther down the line
- Pump and motor are enclosed in a metal housing and protected by a ground fault circuit interrupter
- Water sensor senses the moving water and automatically; shuts off the motor if water isn"t flowing through the pump to protect the unit from damage
- Rugged metal diamond plate case handles abuse in the field
Looking for a cleaner way to clean drains; this drain cleaning machine is the answer. No need to wear your arms out holding a heavy machine over the drain or under the sink. The compact design lets you operate the machine horizontally on the kitchen counter or vertically on the floor next to the tub.
- For 1-1/4 in. -3 in. drain lines
- Compact, lightweight small line drain cleaner with easy carrying handle on top
- 4 ft. guide tube keeps hands, and jobsite, clean
- Quick-change cable cartridge system allows clean and easy cable changes
- Rugged rust resistant aluminum drum can carry 50 ft. of 1/4 or 5/16 Flexicore cable
- Powerful yet silent motor spins cables up to 50 ft. down the line