Conduit Accessories
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
Wall Plates are used for home, commercial and industrial settings for enhanced durability and appearance. They feature a Premium North American powdercoat for corrosion resistance. Metal wallplates have a beauty, weight and feel that plastic can't replace.
- Easily primed and paintable to match or compliment walls
- Won't bow, crack or distort during installation
- Solid sound compared to thin, hollow resonance of economy plastic plates
- Fixture mount
- Includes matching screws
Knock-Out Seals are designed to cover exposed knock-out holes in steel boxes and other metal enclosures. The 1/2 in. Knock-Out Seals (4-Pack) offer corrosion resistance. They are convenient and easy to use.
- Covers knock-out holes in metal enclosures
- Zinc-plated steel
- Corrosion resistant
- Designed for indoor and outdoor use
The #2-1/2 Conduit and Pipe Hangers are designed to secure and suspend 1-1/4 in. EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Use to secure and suspend 1-1/4 in. EMT conduit from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #2-1/2 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
- Used to hang 1 1/4 in. EMT conduit
The 3/4 in. Knock-Out Seals (4-Pack) are used to cover exposed knock-out holes in steel boxes and other metal enclosures. Suitable for indoor and outdoor use. The seals are made with zinc-plated steel for strength.
- Covers exposed knock-out holes
- Corrosion-resistant zinc-plated steel construction
- For use in steel boxes and other metal enclosures
- Suitable for indoor and outdoor applications
For securing EMT and rigid conduit to overhead supports, use these 3/4 in. Steel Conduit and Pipe Hangers (5-Pack). They feature speed thread with a square neck for easy assembly. For indoor and outdoor applications.
- Designed to secure and suspend EMT and rigid conduit from overhead supports
- Corrosion-resistant, zinc-plated steel construction
- Bolt contains square neck for easy assembly
- UL and CSA Listed
The 2 in. Service Entrance Cap is designed for use in overhead service entrances with rigid conduit, intermediate metal conduit (IMC) or EMT conduit. The cap serves as a connecting point for the service entrance wires.
- Connects service entrance wires
- Copper-free die cast aluminum resists corrosion
- Designed for indoor or outdoor use in overhead service entrances
- Compatible with rigid conduit, EMT conduit or IMC
- UL and CSA listed for safety and peace of mind
- Clamp-on style for installation
The Halex 1-1/4 in. - 3 in. Adjustable Wire Holder is designed to be installed below the overhead service-entrance cap as a holding device for incoming service-entrance wires. It is made of porcelain reinforced with galvanized steel. It is easy to install.
- Securely holds overhead service-entrance wires
- Made of porcelain and galvanized steel
- For indoor or outdoor use
- Installs easily in minutes
This product is an all plastic snap-in blank. This item costs less than steel snap-in blanks and provide a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- For knock-outs
- Black in color
- Dimensions: 1.015 in. x 0.468 in.
- Trade size: 1/2 in.
The #3 Conduit and Pipe Hangers are designed to secure and suspend 1-1/4 in. Rigid or 1-1/2 in. EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1-1/4 in. rigid or 1-1/2 in. EMT conduit from an overhead support
- Zinc-plated steel resists corrosion
- Compatible with #3 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for ease of assembly
The 2-Gang Non-Metallic Blank FS Box Cover is designed to fit 2-Gang FS boxes and other non-metallic and metallic FS boxes. It is crafted with PVC and comes with stainless-steel mounting screws and a gasket. The cover is weatherproof and is CSA and UL listed to help ensure safety.
- Fits 2-Gang FS boxes and other non-metallic and metallic FS boxes
- Designed for indoor and outdoor use
- PVC construction
- Comes with stainless-steel mounting screws and a gasket
- CSA and UL listed for safety
The #5 Conduit and Pipe Hangers are designed to secure and suspend 2 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 2 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #5 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
This is product is an all-plastic snap-in blank. This item will save you money as it costs less than steel snap-in blanks while providing a safer installation. A metal blank in a plastic enclosure is not grounded and could become a shock hazard.
- CSA and UL Listed
- Black
- Knock-outs
- Trade size: 3/4 in.
- Dimensions: 1.250 in. x 0.468 in.
Weatherproof closures are used to seal unused outlets of an outdoor electrical boxes, extension adapters, cluster covers or round splice boxes. Each bag includes 4 plugs. Made from diecast metal.
- Seal unused threaded outlets
- 4-pack
- UL Listed
- NEMA 3R compliant
The 2 in. PVC Service Entrance Cap is designed for use with Schedule 40 and Schedule 80 rigid non-metallic conduit (RNC). The cap is crafted with PVC and features an extended cap for a weather-resistant termination. It also features a removable cover with plate knockouts and radius knockouts that eliminate sharp edges and wire chafing.
- For use with schedule 40 and schedule 80 RNC
- PVC construction
- Removable cover with plate knockouts
- Radius knockouts eliminate sharp edges and wire and cable chafing
- Extended cap for a weather-resistant termination
- CSA and UL listed for safety
- Easy to install on conduit risers
The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #2 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
Halex 1/2 in. Insulating Bushings (10-Pack) protect wires on a threaded Rigid or Intermediary Metal Conduit (IMC). They are required by the National Electrical Code (NEC). These bushings meet UL and CSA requirements.
- Use on threaded rigid or IMC conduits to protect wires
- Indoor/outdoor use
- Made from high-impact thermoplastic that is flame retardant to 105 degree C
- UL and CSA Listed
- Required by the NEC
The 3/8 in. - 1/2 in. Conduit and Pipe Hangers (5-Pack) with speed threads are Designed to secure and suspend Rigid and EMT conduits from overhead supports. Bolt has a square neck for easy assembly. UL and CSA listed.
- Use to secure and suspend 3/8 in. and 1/2 in. rigid and 1/2 in. EMT conduits from overhead supports
- Indoor/outdoor use
- Zinc-plated steel construction
- Corrosion resistant
Weatherproof extension adapters increase box capacity needed for NEC box fill requirements. They are for use with weatherproof boxes. Threaded outlets are 1/2 in.
- State-of-the-art powder coat finish provides maximum weatherability and scratch-resistance
- Rugged die-cast metallic construction
- Mounting hardware, gasket and installations instructions included
- NEMA 3R compliant
- 4-Pack
The 1-1/4 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used indoors or outside.
- For connecting SE/SEU and UF cables to boxes in wet environments
- Made of die-cast corrosion-resistant zinc alloy
- For indoor or outdoor use
- UL and CSA listed
- Corrosion resistant
The 1/2 in. Watertight Conduit Connector is designed for use in indoor and outdoor service-entrance applications. The connector is suitable for use with 14/2 and 12/2 cable. Suitable for indoor and outdoor use.
- Connects SE and SEU cables to metal enclosures
- Can be used to connect a UF cable to a waterproof box with a threaded hub
- Die-cast zinc-alloy body resists corrosion
- Compatible with 14/2 and 12/2 cable
- Suitable for indoor and outdoor use
- UL and CSA Listed
Carlon PVC Grey 1-gang weatherproof cover. Cover is weatherproof and UV resistant. Cover is suitable for outdoor use.
- Suitable for outdoor use
- PVC construction
- Fits 1-Gang FS boxes
- UL and ETL listed for safety
- Supplied with stainless-steel mounting screws and a gasket
The 3#3 to 3#2 NM Cable 1-Hole Service Entrance Cable Straps (6-Pack) secure non-metallic cable to surfaces such as wood and masonry. The straps are made from zinc-plated steel for corrosion resistance. It is intended for indoor or outdoor use.
- Designed to secure service entrance cable to wood, masonry or a similar surface
- Made of zinc-plated steel for corrosion resistance
- 1-hole design for easy installation
- For indoor or outdoor use
The 1/4 in. 1-Hole Ground Cable Straps (50-Pack) are handy for securing bare solid wire to a working surface. They are corrosion resistant for indoor or outdoor use. Easy installation.
- Straps secure bare wire to a wood, masonry or other work surface
- Compatible with EMT cable
- Made of corrosion-resistant galvanized steel
- Quick and easy to install