Electrical Box Accessories
The Westinghouse Fan Master Jr. Non-Metallic Support Box allows you to safely and securely attach a lighting fixture or ceiling fan to a building's structural support. The fixture or ceiling fan is supported by the joist, not the box. Perfect for new construction, the Fan Master Jr. can be used in applications where duct work or wiring is present. The design features 13.4 cu. in. wiring capacity on only 1 side of the box, so the Fan Master Jr. can be installed on either side of a joist without having to split the wiring. It includes 2 knockouts for conduit or Romex, 1 Romex connector and 1 Romex clamp. The Fan Master Jr. is UL Listed for fixture support of 150 lbs. or less and ceiling fan support of 70 lbs. or less. The box works with any model of ceiling fan and has a 2-hour fire rating. Fan Master Jr. can be mounted on standard joists as well as wider joist configurations where a saddle style box will not fit. Product reference number 02525.
- Fan master Jr. support box allows safe, simple installation of fans and fixtures in new construction
- Fits any ceiling fan up to 70 lbs. or lighting fixture up to 150 lbs.
- Built-in tabs allow for hands free installation, saf-T-cap protects bolts and wires during painting and drywall installation
- Design provides additional wiring space on 1-side of the box, simply mount to either side of a joist
- UL Listed for safety, 2-hour fire rating
- Includes fan master Jr. with saf-T-cap, Romex connector and mounting hardware
- Electrical box measures 4 in. H x 1/2 in. D, 13.4 cu. in. capacity
Designed to be used with any deep switch box that has ears. GRIP-LOK supports Old Work installations. Simply slip the GRIP-LOK between the box and wall, then bend tabs into box.
- 1 in.-7/8 in. long legs
- Includes 2 switch supports
- Easy installation
- Easily converts box for an old work application
- 100 pack of 2
Adjustable Bar Hanger allows box to be placed between ceiling joists or wall studs quickly and easily. Park in place barbs are inserted into joist prior to screw installation. Includes a stud to accommodate fixture stem.
- Bar hanger adjusts 14-1/2 in. to 22-1/2 in.
- Box mounts bar thru center 1/2 in. knockout
- Bar hanger does not include box
- Clip installs in 1/2 in. knockout in bottom (back) of box
Non-metallic Adapter ring is for use with nonmetallic round floor box number 5511. This adapter ring is suitable for use with all nonmetallic and brass flanges. The adapter simply fastens to the 5511-floor box with the included retaining clips and screws. The clips slide into the molded slots in the box wall.
- High strength rigid non-corrosive PVC construction
- Accepts plastic and metal covers
- Required for 5511 floor boxes
- Includes installation instructions
- Accommodates wiring devices for various receptacles
Made of zinc-die cast for use with the AC, MCI-A and HCF steel and aluminum cables. The Snap-2-it connector has been test been tested and listed by UL in accordance with UL's ground fault requirements. It is safe and fast to install - save about 17-seconds per fitting.
- Snaps onto cable, then into box
- No tools or locknut needed
- Saves time and money
- Cable and connector can be pre-assembled, then entire assembly can be snapped into box
- For use with MC/AC steel and aluminum cable sizes 14/2, 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10
- Fits 3.8 in. (trade size) flexible metal conduit, steel and aluminum (regular and reduced wall)
- Trade size: 3/8 in.
- Knockout size: 1/2 in.
- Dimensions: 1.41 in. x 0.85 in. x 0.405 in. x 1.0 in.
- Cable range: 0.405 - 0.612
The Red Dot Deck Grommet Pro outlet remains recessed below the raised deck whether in use or not. Includes Four Arms and #8-32 Screws for Attachment to Deck and 2 Cord Fittings, Duplex adapter plate provided for use with conventional TR/WR duplex receptacle. Eliminates the potential safety hazard of power cords draping along the deck surface.
- Non-metallic
- Black in color
- Duplex adapter plate provided
- UL E11461
- Die-Cast Construction
- Speed Nipple
- Bulk
- For Rigid Conduit
- Die-Cast Construction
- Speed Nipple
- Bulk
- For Rigid Conduit
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
The Eaton Cutler-Hammer 1/4 in. is a hold-down retainer kit for 1, 2, 3-pole Type CH Circuit Breakers. The breaker retainer bracket is used to secure the circuit breaker to the main lug load center for back-feed applications. The bracket is compatible with Cutler-Hammer type CH main lug load centers.
- Use to secure the circuit breaker to the main lug load center for back-feed applications
- Compatible with cutler-hammer type CH main lug load centers
- For use with 1, 2 and 3-pole type CH circuit breakers
- ANSI certified and CSA and UL listed
