Lighting Photocontrols

Our photo control 2021 is a SPST conduit mounting pencil Swivel, Lexan Housing Photo Control for your Flood Lamp, Patio Lamp, Decorative Lighting applications. Ideal for applications where it is essential to aim the photocell in an exact direction to sense natural light but avoid artificial light. The Photocell responds to the light spectrum near to that of a human eye rather than passing vehicles.

• All lexan enclosures are impact and vandal resistant, translucent lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength
• Our sensor is conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Photo control works with screw base CFLs including LED with easy on and off that average less than 1-Watt power consumption, turn on is 1 to 5fc, turn off is 3 to 15fc, without the slide in position, on/off adjustment is easily made by moving a slide cover, no tools required
• 2022 is easy to operate as it has delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. in a wide temperature range of -40 to +140F (-40 to +60C)
• Cell is cadmium sulphide, epoxy conformal coated, 1/2 in. Dia with contacts that will remain closed between dusk and dawn, and (the unit fails in the on position, it comes with 3 colors coded lead wires that are a minimum 6 in. wire leads, #16AWG, rated for 105C

The K4100 and K4400 Series Photo Controls feature stem mounting, thermal-type, controls with single and multi-voltage models. Thermal-type photo controls provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights and lighting. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bimetal and composite resistor for reliable long-life operation over ambient temperature extremes.

• Mechanical bimetal switch with Cadmium Sulfide photocell
• Delay feature prevents unwanted OFF switching
• Gray plastic housing
• 1⁄2 in.-14 NPSM threaded stem
• Washer gasket and locking nut included
• #18 AWG, 9 in. wire leads
• Perfect for use with parking lot lighting, landscape lighting, exterior lighting, pedestrian pathway lighting, street lighting

The 2001 is a 120-Volt SPST with 180 Swivel mounting in Lexan Housing Photo Control. The Photocell in this photo control is perfect for your flood lamp, patio lamp, decorative lighting applications as it will respond the light spectrum near to that of human eye. Conformal coated cadmium sulphide photocell resists of effects of moisture and airborne contaminants.

• All lexan enclosures are impact and vandal resistant, translucent lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength
• Sensor is conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants providing the photocell to be able to respond to the light spectrum near to that of a human eye
• Energy savings as it works with screw base CFLs with on/off: turn on is 1 to 5fc, turn off is 3 to 15 fc, without the slide in position, on/off adjustment is easily made by moving a slide cover, no tools required
• Photo control operates by delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. in temperature range from -40 to +140F (-40 to +60C)
• Cell is cadmium sulphide, epoxy conformal coated, 1/2 in. Dia, the contacts remain closed between dusk and dawn, (the unit fails in the on position) there are 3 color coded lead wires, minimum 6 in. wire leads, #16AWG, rated for 105C

The TORK 3000 Single Pole Single Throw Flush Mounting Lexan Housing Photo Control automatically turns your outdoor light(s) on when it gets dark. The weatherproof construction of the photo control and lens prevents moisture and airborne contaminants. It is perfect for your Pole Lanterns, Lawn Lighting, Walkways applications. Our Photocell responds to the light spectrum near to that of a human eye. It works with screw based CFLs for energy savings.

• Sensor is conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Works with screw base CFLs for energy savings with power consumption averages under 1-Watt
• Easy to operate with delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. the turn on is 1 to 5fc, turn off is 3 to 15fc in temperature range of -40to +140F (-40 to +60C)
• Our cell is cadmium sulphide, conformed coated, 1/2 in. Dia with contacts normally closed (the unit fails in the on position)
• Lead wires consists of 3 color coded, minimum 9 in. wire leads, #16AWG, rated for 105C
• 5 year warranty

Automatically have your outdoor light(s) turn on when it gets dark is perfect for your Pole Lanterns, Lawn Lighting, Walkways applications. It works with CFLS to create energy savings. Cell is cadmium sulphide, conformed coated, 1/2 in. Dia with contacts normally closed (the unit fails in the on position).

• Flush mounting through 0.6875 in. hole in post lantern or lighting fixture, 3/8 in. NPT, stem 3/4 in. long gasket and nut supplied, control housing is weather-resistant molded Lexan with ultrasonically welded seams
• Sensor is conformed coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Easy to operate as delay is up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. turn on is 1 to 5fc, turn off is 3 to 15fc
• Energy savings as it works with screw base CFLs with power consumption averages less than 1-Watt
• 5-year limited warranty
• Lead wires consists of 3 color coded, minimum 9 in. wire leads, #16AWG, rated for 105°C
• Temperature range of -40°F to +140°F (-40° to +60°C)

The K4000 Series Fixed Position Mounting Photo Controls are thermal-type photo controls that fit into a standard outlet box, post lamp or wall pack. The photo controls provide dusk-to-dawn lighting control, along with a delay action, which eliminates loads switching OFF due to car headlights and lightning. The thermal-type controls feature a cadmium sulfide photocell and a sonic-welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bi-metal and composite resistor for reliable long-life operation over ambient temperature extremes.

• Mechanical bimetal switch with Cadmium Sulfide photocell
• Compact size fits into standard outlet box, post lamp, wall pack and other lighting fixtures
• Delay feature prevents unwanted OFF switching
• 3/8 in. -18 NPSM, 3/4 in. long stem with locking nut and washer gasket
• Perfect for use with parking lot lighting, landscape lighting, exterior lighting, pedestrian pathway lighting, street lighting and more

The TORK 2000 Photo control is easy to install for Flood Lamp, Patio Lamp, Decorative Lighting areas that need to be well-lit from dusk to dawn. Our Lexan housing with waterproof sealant resists effects of moisture and airborne contaminants. Photocell responds to the light spectrum near to that of a human eye.

• All Lexan enclosures are impact and vandal resistant, translucent Lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength
• Contacts remain closed between dusk and dawn, (the unit fails in the on position)
• Our photo control has delay of up to 2 minutes TP (recent false switching due to light from passing vehicles, lightning, etc.)
• Photo control averages less than 1-Watt of power consumption providing energy savings with screw base CFLs

The Single Pole Single Throw Flush Mounting Lexan Housing Photo Control will automatically have your outdoor light(s) turn on when it gets dark. It is great for your Pole Lanterns, Lawn Lighting, Walkways applications. The Photocell fits all outdoor lamp posts for easy installation. It requires no daylight savings time adjustments as it responds to the light spectrum near to that of a human eye. It works with screw base CFLs and has power consumption average less than 1-Watt.

• Flush mounting through 0.6875 in. hole in post lantern or lighting fixture, 3/8 in. NPT, stem 3/4 in. long gasket and nut supplied, control housing is weather-resistant molded Lexan with ultrasonically welded seams
• Sensor is conformed coated cadmium-sulfide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Works with screw base CFLs with ON/OFF: turn on is 1 to 5fc, turn off are 3 to 15fc and power consumption averages under 1-Watt
• Easy to operate with delay on and off up to 2-minutes to prevent false switching due to light from passing vehicles, lightning, etc. in temperature range of -40°F to +140°F (-40°C to +60°C)
• Cell is cadmium sulfide, conformed coated, 1/2 in. Dia with normally closed contacts (the unit fails in the on position)
• Lead wires consists of 3 color coded, minimum 9 in. wire leads, #16AWG, rated for 105°C

This 2001 SPST 180-swivel mounting in Lexan Housing 208-277-Volt photo control is great for your Flood Lamp, Patio Lamp, Decorative Lighting. The sensor is conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants so that Photocell responds to the light spectrum near to that of a human eye. Meets ANSI/UL773A.

• All Lexan enclosures are impact and vandal resistant, translucent Lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength
• Sensor: conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Energy savings is this photo control works with screw base CFLs and averages under 1-Watt power consumption, the turn on is 1 to 5fc; turn off is 3 to 15fc, without the slide in position, ON/OFF adjustment is easily made by moving a slide cover, no tools required
• Photo control is easy to operate as delay is up to 2-minutes to prevent false switching due to light from passing vehicles, lightning, etc. with temperature range -40° to +140°F (-40° to +60°C)
• Photo control cell is made of cadmium sulphide, epoxy conformal coated, 1/2 in. Dia with contacts that will remain closed between dusk and dawn, (the unit fails in the on position) and 3 colors coded lead wires, minimum 6 in. wire leads, #16AWG, rated for 105°C

The 2000-2 Photocontrol is great for flood lamp, patio lamp and decorative lighting from dusk-to-dawn. Our photocell resists effects of moisture and airborne contaminants by responding to the light spectrum near to that of a human eye. It has a delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. This photocontrol meets ANSI/UL773A ratings. All Lexan enclosures are impact and vandal resistant. Translucent Lexan Dome prolongs cell life by further screening out ultraviolet rays. Dome and base are ultrasonically welded for maximum strength. This 2000-21 photocontrol has energy savings as it works with screw base CFLs. To Turn ON is 1 to 5fc and Turn OFF is 3 to 15fc, without the slide in position. The ON/OFF adjustment is easily made by moving a slide cover with No tools required. The contacts remain closed between dusk and dawn and the unit fails in the ON position. TORK 2000-2 features 3 color coded, minimum 6 in. wire leads, #16AWG, rated for 105°C with an average under 1-Watt of power consumption.

• Lexan enclosures are impact and vandal resistant, translucent Lexan dome prolongs cell life by further screening out ultraviolet rays, dome and base are ultrasonically welded for maximum strength
• Sensors conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
• Photo controls contacts remain closed between dusk and dawn as the unit fails in the on position, easy installation with 3 color coded, minimum 6 in. wire leads, #16AWG, rated for 105°C that averages under 1-Watt power consumption with temperature range from -40°F to +140°F (-40°C to +60°C)
• Photo control has delay up to 2-minutes to prevent false switching due to light from passing vehicles, lightning, etc. to control flood lamp, patio lamp, decorative lighting from dusk-to-dawn
• No tools required for adjustments as ours is easily made by moving a slide cover, common adjustments include turn on is 1 to 5fc, turn off is 3 to 15fc, without the slide in position

The LC4500 Series Photo Controls feature low cost locking-type mounting, and thermal-type controls for street lighting and other applications requiring a twist and lock type plug connection. Thermal-type photo controls provide dusk-to-dawn lighting control and a delay action, which eliminates loads switching OFF due to car headlights and lightning. The thermal-type controls feature a cadmium sulfide photocell. The design utilizes a dual temperature compensating bimetal and composite resistor for reliable long life operation over ambient temperature extremes.

• 3100-4155W/208-277V/15Amp
• High impact thermoplastic housing
• Meets EEI-NEMA locking device standards
• Meets ANSI C136.10 Standard
• Minimum time delay is 15 seconds
• Equipped with 2400 volt open type spark gap arrester
• Temperature range -20°F to 104°F
• 2-3/4" (7.0cm)H x 3" (7.6cm) diameter

These photocontrols are provided with a swivel arm for easy and flexible installation to standard outdoor light fixtures or electrical boxes. They provide dusk-to-dawn on/off control of outdoor lighting. Sensor time delay of 30-seconds to 90-seconds. 120-Volt AC, 8.3 Amp, 1800-Watt Tungsten.

• Mechanical bimetal switch with cadmium sulfide photocell
• Delay feature prevents unwanted off switching
• High strength, UV resistant plastic housing
• Swivel with 1.2 in. to 14 in. NPSM threaded stem
• Washer gasket and locking nut included
• #18 AWG, 6 in. wire leads