Tee Blocks
These manifolds are designed to connect two cylinders. The check keeps the two tanks equalized and allows each tank to be changed without disrupting the ow of propane to appliances or dispensing large amounts of LP-Gas into the atmosphere from the other tank. When changing out a tank, simply close the tank valve and disconnect. The check will automatically move to the closed tank valve side to seal off the inlet of that tank allowing minimal LP-Gas discharge into the atmosphere.
- Primary uses are for mobile homes, single appliances, recreational vehicles or summer cottages
- Nut Size 7/8 in.
- Inlet: female POL (2)
- Outlet: male hard nose pol
The ME1700A tee check manifold is designed to connect two cylinders. The check keeps the two tanks equalized and allows each tank to be changed without disrupting the flow of propane to appliances. For 1/4 in. inverted flare connections on inlet and ¼ in. pipe outlet.
- Durable brass construction
- Constructed with an O-ring behind each inlet ant a disk check seating into the ROS ring
- Inlet: 1/4 in. female inverted flare (2)
- Outlet: 1/4 in. MNPT
- Includes check
- Primarily used for mobile homes, single appliances, recreational vehicles or summer cottages
These manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time. The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve.
- Body only
- Inlet (2): female POL
- Outlet: 1/4 in. FNPT
- Material: brass
- Manufacture: Marshall Excelsior
- For use with LP gas
These manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no check and are primarily for systems requiring more than 1 cylinder to be in operation at a time. The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve.
- Inlet 1: F POL
- Inlet 2: F POL
- Outlet: female POL
- Nut size: 1-1/8 in.
These manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time. The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve.
- Inlet: 1/4 in. female inverted flare (2)
- Outlet: 1/4 in. MNPT
- Material: brass
- Warning: an excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system; see the excess flow warning page for more information regarding the use of excess ow devices
- Pigtail or piping connection: 1/4 in. inverted flare
- Regulator connection: 1/4 in. MNPT
Solid brass camping tee connection. Connects 2 appliances to bulk tank. For use on high and/or low pressure.
- Inlet: 0.9 GPM excess flow male hard nose POL with plastic hand wheel
- Outlet #1: female POL
- Outlet #2: female POL
- Durable all brass construction
These manifolds are designed to connect two cylinders. The check keeps the two tanks equalized and allows each tank to be changed without disrupting the propane to appliances or dispensing large amounts of LP-Gas into the atmosphere from the other tank. When changing out a tank, simply close the tank valve and disconnect. The check will automatically move to the closed tank valve side to seal off the inlet of that tank allowing minimal LP-Gas discharge into the atmosphere.
- Primary uses are for mobile homes, single appliances, recreational vehicles or summer cottages
- Nut size: 7/8 in.
- Inlet: female POL (2)
- Outlet: male hard nose POL
This Excess Flow Soft Nose P.O.L. features excess flow safety and is CSA approved and UL Listed. The soft nose acts as a second seal. It is solid brass and includes a hand wheel.
- 1/4 in. male pipe thread
- Includes hand wheel
- Soft nose P.O.L acts as secondary seal
- Solid brass construction