Gas Pipe, Tubing & Fittings
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Lead free
- Brass
For use on fuel, oil, LP and natural gas lines and systems. Connects with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures 212 degree F
- Pressure up to 640 psi
- 1-year warranty against defect
- Flare
- Forged brass
- Cap
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P, and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gasses using forged nuts. Recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared. Not recommended for use with polybutylene or soft plastic tubing.
- Temperature range: -65F to 250F
- 45 flare
- Easy to use
- Not for underground use
- Compatible tubing: copper, brass, aluminum, welded steel hydraulic
- Resist vibration and mechanical pull-out
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Brass compression fitting ensures safety and peace of mind for years to come. It is not recommended for use with steel tubing. Compression fitting is easy to use for both contractors and the do-it-yourself.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Nut
Brass compression fitting ensures safety and peace of mind for years to come. It is not recommended for use with steel tubing. Compression fitting is easy to use for both contractors and the do-it-yourself.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Nut
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x MIP
- Forged brass
- Adapter
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x FIP
- Forged brass
- Adapter
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65F to +250F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65F to +250F
- Maximum pressure based on 73F working temperature
Flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P, and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gasses using forged nuts. Recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared. Not recommended for use with polybutylene or soft plastic tubing.
- Temperature range: -65F to 250F
- 45 flare
- Easy to use
- Not for underground use
- Compatible tubing: copper, brass, aluminum, welded steel hydraulic
- Resist vibration and mechanical pull-out
For use on fuel, oil, LP and natural gas lines and systems. Connects with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures 212 degree F
- Pressure up to 640 psi
- 1-year warranty against defect
- Flare
- Forged brass
- Cap
Flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P, and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gasses using forged nuts. Recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared. Not recommended for use with polybutylene or soft plastic tubing.
- Temperature range: -65F to 250F
- 45 flare
- Easy to use
- Not for underground use
- Compatible tubing: copper, brass, aluminum, welded steel hydraulic
- Resist vibration and mechanical pull-out
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x MIP
- Forged brass
- Adapter
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures up to 250 degree F
- Pressure up to 1200 psi
- 1-year warranty against defect
- Forged brass
- Flare x MIP
- Elbow
1-year warranty against defect. Pipe to hose connection. Brass quality and heavy-duty design.
- Withstand temperatures up to 250 degree F
- Pressure up to 400 psi
- Threaded
- Flare x MIP
- Forged brass
- Adapter
For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures up to 250 degree F
- Pressure up to 1200 psi
- 1-year warranty against defect
- Forged brass
- Flare x MIP
- Elbow
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Typical application-LP and natural gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of 65°F to +250°F
- Maximum pressure based on 73°F working temperature
- Not for potable water