Hoses
50 ft. Coil 3/8 in. High Pressure Propane Hose commonly used for hose connectors between the Regulator and the consumption equipment as a Heater, a Cooker or a Grill. High Gas Flow rate. Very convenient length.
- PVC lined rubber
- 3/8 in. I.D. HP
- Maximum working pressure 350 psi
- Propane vapor use only
- CSA approved
- CSA
The High Flow Series Hoses are specifically designed to meet the high demands of todays motorhomes, trailers and on demand water heaters. Our new High Flow Type I 400,000 BTU (red nut) hoses are designed for those applications that require more than 200,000 BTUs. The new High Flow hoses are designed with both excess ow and thermal link safety features, just like the green nut Type I connector.
- Capacity: 400,000 BTU/H
- 1/4 in. hose I.D.
- Excess flow safety shut-off
- Flexible thermoplastic UL and CGA approved hose
50 ft. Coil 1/4 in. High Pressure Propane Hose commonly used for hose connectors between the Regulator and the consumption equipment as a Heater, a Cooker or a Grill. High Gas Flow rate. Very convenient length.
- PVC lined rubber
- 1/4 in. I.D. HP
- Maximum working pressure 350 psi
- Propane vapor use only
- CSA approved
The High Flow Series Hoses are specifically designed to meet the high demands of todays motorhomes, trailers and on demand water heaters. Our new High Flow Type I 400,000 BTU (red nut) hoses are designed for those applications that require more than 200,000 BTUs. The new High Flow hoses are designed with both excess ow and thermal link safety features, just like the green nut Type I connector.
- Capacity: 400,000 BTU/H
- 1/4 in. hose I.D.
- Excess flow safety shut-off
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Red female QCC, type I connection x male QCC, type I connection with female POL
- 1/4 in. hose I.D.
- Fits both single and dual outlet boxes
- Flexible thermoplastic UL and CGA approved hose
- 22" Propane Replacement Barbecue Hose
- 3/8" Male Pipe Thread x 3/8" Female Flare
The High Flow Series Hoses are specifically designed to meet the high demands of todays motorhomes, trailers and on demand water heaters. Our new High Flow Type I 400,000 BTU (red nut) hoses are designed for those applications that require more than 200,000 BTUs. The new High Flow hoses are designed with both excess ow and thermal link safety features, just like the green nut Type I connector.
- Capacity: 400,000 BTU/H
- 1/4 in. hose I.D.
- Excess flow safety shut-off
- Flexible thermoplastic UL and CGA approved hose
- Vinyl Lined Rubber Hose
- 100 Ft. Coil
- UL Standard #21
- Rated Up To 350PSI
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The High Flow Series Hoses are specifically designed to meet the high demands of todays motorhomes, trailers and on demand water heaters. Our new High Flow Type I 400,000 BTU (red nut) hoses are designed for those applications that require more than 200,000 BTUs. The new High Flow hoses are designed with both excess ow and thermal link safety features, just like the green nut Type I connector.
- Capacity: 400,000 BTU/H
- 1/4 in. hose I.D.
- Excess flow safety shut-off
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Also available in 24 in. and 36 in. L
- 1/4 in. hose I.D.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Also available in 18 in. and 36 in. L
- 1/4 in. hose I.D.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Also available in 12 in., 36 in., 48 in. and 60 in. L
- 1/4 in. hose I.D.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
- TruZero High Pressure Rubber Hose is designed to meet UL21, CGA, Type1, EN, British-BS and ASTM Standards
- Constructed from high grade aerospace rubber compounds
- Resists wear 50% more than other leading brands
- Superior cold weather flexibility to -65ºF
- Excellent for LPG transportation, bobtail lines, vapor lines, plant use, and most other applications.
- TruZero High Pressure Rubber Hose is designed to meet UL21, CGA, Type1, EN, British-BS and ASTM Standards
- Constructed from high grade aerospace rubber compounds
- Resists wear 50% more than other leading brands
- Superior cold weather flexibility to -65ºF
- Excellent for LPG transportation, bobtail lines, vapor lines, plant use, and most other applications.
TruZero high-pressure LP gas rubber hoses are constructed using extruded nitrile tubing and specially compounded neoprene textile reinforced covers. They meet UL21, CGA, Type1, EN, British-BS and ASTM standards. All TruZero hose reels and coils are sold in 1 continuous piece.
- TruZero high pressure rubber hose is designed to meet UL21, CGA, type1, EN, British-BS and ASTM standards
- Constructed from high grade aerospace rubber compounds
- Resists wear 50% more than other leading brands
- Superior cold weather flexibility to minus 65 degree F
- Excellent for LPG transportation, bobtail lines, vapor lines, plant use, and most other applications