Searched for "40142000"
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose I.D.
- cULus listed for lengths up to 60 in.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
The ME492 appliance adapter is machined of solid brass. The 1/4 female pipe fitting allows a camping appliance to be adapted to a larger bulk cylinder instead of the smaller disposable LP gas cylinder. The male 1-20 threaded end of the adapter fits all standard camping appliance regulator inlets, such as camp stoves, lanterns or portable heaters.
- Inlet: 1/4 FNPT with O-ring
- Outlet: 1-20 male - no check
- Good quality
- Camping fitting
- Solid brass
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
The ME488P Disposable Cylinder Adapter is machined of solid brass. The 1/4 in. male pipe fitting fits the inlet of all standard low-pressure regulators. The female 1 to 20 disposable cylinder thread accepts a disposable LP gas cylinder and allows for use of small portable cylinders if larger bulk cylinders are not available.
- Use to connect disposable cylinders to preheaters, torches and other equipment with 1/4 in. FPT inlet
- Perfect for remote preheater and torch use when space is at a premium and equipment use is minimal
- Caution: when installing the cylinder adapter into regulator inlet, it is recommended that Te on tape be used instead of sealant, if thread sealant is used, extreme caution should be taken that no thread sealant gets into the regulator inlet
- Durable all brass construction
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose I.D.
- cULus listed for lengths up to 60 in.
- Great for RV LP gas applications
- Flexible thermoplastic UL and CGA approved hose
The Stay-Longer Propane Kits are designed to give you newflexibility on how you use your LP-Gas. You can stay longer by hooking up auxiliary LP-Gas cylinders or you can tap into the RVs LP-Gas system to fuel portable high-pressure appliances. The MER473 includes a brass tee connection (ME420) 0.9 GPM excess flow male hard nose POL x female POL x one-20 male x 1/4 in. female inverted flare and 1 5 ft. hose (MER401-60) 0.9 GPM excess flow male POL x 1/4 in. male inverted flare.
- All kits include installation instructions and a convenient reusable box for storage
- Easy hook-up
- Hose has thermal protection
- Note: the tee fitting must be installed between the vapor withdrawal valve on your LP gas container and the pressure regulator, this properly places the tee fitting in the high pressure portion of the LP gas system, gas connections to the tee fitting are not designed for movement or rotation after installation, flexing twisting or vibration should be avoided
1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.
- Forged brass body for durability
- Chrome plated finish offers decorative appearance
- Ball valve design provides reliable shutoff and re-opening
- IAPMO and CSA listed
- Certified to ANSI/NSF standard 61-9 annex G
- Manufactured in an ISO accredited facility
The ME425 Excess Flow Elbow is designed to be used with RV propane cylinders with the new Type I, QCC ACME connection. The elbow has a 1 -20 male high pressure LP gas connection port for powering portable camping appliances such as camp stoves, lanterns, table top grills and other small LP appliances. Available individually or in a kit. The ME425 elbow connects to MECs camping appliance hoses MER421-60 and MER421-144 (sold separately).
- Soft nose excess flow POL x 1-5/16 in. M acme x 1 in. 20 male x 1/4 in. inverted flare tee
- Brass for corrosion resistance, ductility at high temperatures and low magnetic permeability
- Includes caps and straps
- Stay longer tee with soft nose pol
Adapts standard refillable cylinders to a propane hose with a 1/4 in. FNPT connection. Inside is a nylon bushing and O-ring to seal to the nipple on disposable propane cylinder fittings or appliances. This quality gas connection fitting will make any Job easier to complete. Great for 1 lb. tanks.
- Outlet: 1/4 in. MNPT
- Inlet: 1 in. -20 male
- Inside is a check/safety valve
- Durable construction
Excela-Flo two-stage regulators are approved for use in nearly all portable applications and outdoor cooking appliances utilizing low pressure. They feature all zinc body construction, high and low 1/8 in. NPT pressure tap ports, an integral second stage drip lip vent and optional standard or 90 degree vent locations. The Excela-Flo High Capacity Compact Integral Two Stage Regulator is ideally suited for high demand RV, outdoor appliances, cabins, seasonal homes, gas fire places, water heaters, ranges or other moderate to low demand domestic home installations. (Green bonnet identifies high capacity model). Excela-Flo regulators meet UL, RVIA and NFPA requirements.
- Type: 2-Stage
- Max. Inlet Pressure: 250 PSI
- Inlet Connection: 1/4 in. FNPT
- Outlet Connection: 3/8 in. FNPT
- Exterior Finish: Raw Zinc / Powder Coated
The Stay-Longer Propane Kits are designed to give you newflexibility on how you use your LP-Gas. You can stay longer by hooking up auxiliary LP-Gas cylinders or you can tap into the RVs LP-Gas system to fuel portable high-pressure appliances. The MER473 includes a brass tee connection (ME420) 0.9 GPM excess flow male hard nose POL x female POL x one-20 male x 1/4 in. female inverted flare, 1 5 ft. hose (MER401-60) 0.9 GPM excess flow male POL x 1/4 in. male inverted flare and one 12 ft. hose (MER421-144) one-20 male x one-20 female.
- All kits include installation instructions and a convenient reusable box for storage
- Easy hook-up
- Hose has thermal protection
- Note: the tee fitting must be installed between the vapor withdrawal valve on your LP gas container and the pressure regulator, this properly places the tee fitting in the high pressure portion of the LP gas system, gas connections to the tee fitting are not designed for movement or rotation after installation, flexing twisting or vibration should be avoided
MEC Stainless Steel braided pigtails are for connecting propane cylinders to the propane regulator. The Stainless Steel braid provides added protection to the hose along with the safety features of thermal protection in case of fire and excess flow protection in case of broken gas line. Female QCC, Type I connection x 1/4" inverted male flare. MEC green Type I Nut for use on RV application ONLY. (200,000 BTUH)
- BTU/H: Standard - 200,000 / High Flow - 400,000
- Excess Flow Safety Shut-Off
- RVIA and NFPA 1192 Compliant
- Brass Ferrules
- 1/4" Inv. Flare and 1/4" MPT connection offered
The ME481 Last Chance Adapter allows you to connect a small disposable cylinder to your grill or other gas appliance when your larger tank unexpectedly runs out of propane. A wonderful convenience to ensure that you will have additional cooking time to finish your meal. Depending on the size of your grill, you will be able to extend your cooking time by approximately 1 plus hours. CAUTION: The disposable cylinder must always be within 45 of the upright (vertical) position when connected to the grill connection. Failure to do so can result in LP in its liquid form entering the grill. This could result in explosion, fire hazard or personal injury.
- Connects gas grill to RV gas system
- Features internal valve check
- 1-5/16 in. male ACME x FPOL x 1 in. 20 female with check valve
- Can be used with a small throwaway cylinder