Perfection Risers

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 3/4 in. IPS, SDR 11 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" MIP x 3/4" IPS
• 36"L
• SDR 11
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 1/2 in. MPT x 1/2 in. CTS, SDR 7 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" MPT x 3/4" IPS
• 84"L
• SDR 11
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" MIP x 1/2" CTS
• 36"L
• .090" WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• MIP X POLY: 3/4" MPT X 3/4" IPS
• SDR 11
• 26" Vertical
• 26" Horizon
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 1/2 in. CTS, SDR 7 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 1/2" MIP x 1/2" CTS
• 36"L
• .090" WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Pressure switch allows for convenient use
• Pressure gauge displays precise readings from 0 to 100 PSI
• Made from lead-free materials for lasting durability
• Designed to ensure reliable functioning

• MIP X POLY: 3/4" IPS X 1/2" CTS
• .090" SDR/WALL
• 18" Vertical
• 18" Horizon
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

Chicago Fittings X-Riser Service Head Adapter-Anode-Less Full Flex Riser, 3/4 in. MPT x 3/4 in. IPS, SDR 11 x 72 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints one solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 1/2" MIP x 1/2" CTS
• 84"L
• .090" WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" IPS x 1/2" CTS
• 84"L
• .090" WALL
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. with the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece Bi-directional seal and built in stiffener - seal assembly cannot be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
• IAPMO/UPC/IPC Listed

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece Bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

Its our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• MIP X POLY: 1/2" MIP x 1/2" CTS
• .090" SDR/WALL
• 18" Vertical
• 18" Horizon
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• MIP X POLY: 1" MPT x 1" IPS
• SDR 11
• 26" Vertical
• 26" Horizon
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Elster Perfection offers a wide variety of ”standard options allowing you to economically customize a riser to meet your specific requirements... from sizes and materials to configurations and accessories.
• One piece construction
• No special tools or costly installation equipment
• Zinc plated service head adapter
• Independent gripping and sealing components
• Available in all-flex, stubflex or prebent steel casing configurations
• Includes moisture seal/shear protection fitting
• Outlets/inlets/metric
• Servi-Sert service heads are available separately
• No loose parts to misplace, drop or misorient
• Simple, safe and easy to install
• Excellent protection against corrosion
• The pull-out strength is greater than the connected PE tubing. Based on the field proven Permasert coupling.
• Swivel head on Servi-Sert simplifies installations
• Protects underground portion of PE tubing
• Widest variety of sizes and configurations
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Elster Perfection offers a wide variety of standard options allowing you to economically customize a riser to meet your specific requirements... from sizes and materials to configurations and accessories
• One piece construction
• No special tools or costly installation equipment
• Zinc plated service head adapter
• Independent gripping and sealing components
• Available in all-flex, stubflex or prebent steel casing configurations
• Includes moisture seal/shear protection fitting
• Outlets/inlets/metric
• Servi-Sert service heads are available separately
• No loose parts to misplace, drop or misorient
• Simple, safe and easy to install
• Excellent protection against corrosion
• The pull-out strength is greater than the connected PE tubing. Based on the field proven Permasert coupling
• Swivel head on Servi-Sert simplifies installations
• Protects underground portion of PE tubing
• Widest variety of sizes and configurations

• NFPA-58 approved
• Moisture seal attached at tail end
• Internal plastic liner to protect the PE
• MIP X POLY: 3/4" MPT x 1/2" IPS
• 36" L
• SDR 11
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• MIP X POLY: 1/4" IPS x 1-1/4" IPS
• SDR 10
• 24" Vertical
• 24" Horizon
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• MIP X POLY: 1-1/4" IPS x 1-1/4" IPS

Chicago Fittings X-Riser Service Head Adapter-Anode-Less Full Flex Riser, 3/4 in. MPT x 1 in. IPS, SDR 11 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints one solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes

• Elster Perfection offers a wide variety of ”standard options allowing you to economically customize a riser to meet your specific requirements... from sizes and materials to configurations and accessories
• One piece construction
• No special tools or costly installation equipment
• Zinc plated service head adapter
• Independent gripping and sealing components
• Available in all-flex, stub-flex or pre-bent steel casing configurations
• Includes moisture seal/shear protection fitting
• Outlets/inlets/metric
• Servi-Sert service heads are available separately
• Excellent protection against corrosion
• The pull-out strength is greater than the connected PE tubing. Based on the field proven Permasert coupling.
• Swivel head on Servi-Sert simplifies installations
• Protects underground portion of PE tubing
• Widest variety of sizes and configurations
  

*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES

• Elster Perfection offers a wide variety of standard options allowing you to economically customize a riser to meet your specific requirements... from sizes and materials to configurations and accessories
• One piece construction
• No special tools or costly installation equipment
• Zinc plated service head adapter
• Independent gripping and sealing components
• Available in all-flex, stubflex or prebent steel casing configurations
• Includes moisture seal/shear protection fitting
• Outlets/inlets/metric
• Servi-Sert service heads are available separately
• Excellent protection against corrosion
• The pull-out strength is greater than the connected PE tubing. Based on the field proven Permasert coupling
• Swivel head on Servi-Sert simplifies installations
• Protects underground portion of PE tubing
• Widest variety of sizes and configurations

Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 1/2 in. CTS, SDR 7 x 96 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.

• No underground joints 1 solid service line from point-to-point with above ground terminations
• No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
• 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
• No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
• IAPMO/UPC/IPC Listed
• Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes