First Stage - High Pressure Regulators
MEGR-1122H Series: Offers a compact first stage regulator design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9-12 psig (factory set at 10 psig), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifice to minimize freeze ups while providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. 1,000,000 BTU/H flow capacity.
- Maximum inlet pressure: 250 psig
- Orifice size: 0.15 in.
- Relief type: internal relief - spring loaded
- Pressure taps: #54 orifice 1/8 FNPT plugged-2
MEGR-1622H Series: Offers all the same features as the compact MEGR-1122H Series in a full-size version. Our full size MEGR-1622H Series has a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 in. FNPT tapped drip lip vent to help prevent relief vent blockage. 2,750,000 BTU/H flow capacity.
- Type: first stage
- Maximum inlet pressure: 250 psig
- Orifice size: 0.219 in.
- Outlet adjustment range: 8 psi to 12 psi
MEGR-1222H Series offers a compact first stage regulator design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9-12 psig (factory set at 10 psig), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifice to minimize freeze ups. Also provids superior downstream regulation and maximum corrosion resistance against weather or contaminated gas.
- F. POL inlet version features new patent pending anti-freeze heat transfer fins
- Type: first stage
- Max. inlet pressure: 250 psig
- Orifice size: 0.15
MEGR-1222H Series. Offers a compact first stage regulator design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9-12 psig (factory set at 10 psig) and a large aluminum precision machined orifice to minimize freeze ups while providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas.
- Max. inlet pressure: 250 psig
- Orifice size: 0.15
- Diaphragm: fabric reinforced NBR molded lip O-ring bonnet/body seal
- Pressure taps: #54 orifice 1/8 FNPT plugged (2)
- Stainless steel internal components
- Fluorocarbon (FKM) seat discs
- Molded lip fabric reinforced diaphragms
MEGR-1622H Series: Offers all the same features as the compact MEGR-1122H Series in a full-size version. Our full size MEGR-1622H Series has a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 in. FNPT tapped drip lip vent to help prevent relief vent blockage. 2,300,000 BTU/H flow capacity.
- Type: first stage
- Maximum inlet pressure: 250 psig
- Orifice size: 0.219 in.
- Outlet adjustment range: 8 psi to 12 psi
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- First stage compact regulator
- POL x ½
- 2100000 BTU
- Made in Italy
UL listed high-pressure regulator that meet a variety of applications for liquid or vapor service. The compact body design makes these regulators particularly useful in installations with space limitations. Equipped with a hand wheel adjustment.
- Maximum inlet pressure: 250 psi (17 bar, 2 bar)
- Gauge port: 1/4 FNPT
- UL listed as high pressure, non-relief regulators
- Contains brass materials that are not compatible with anhydrous ammonia service
UL listed high-pressure regulator that meet a variety of applications for liquid or vapor service. The compact body design makes these regulators particularly useful in installations with space limitations. Equipped with a hand wheel adjustment.
- Maximum inlet pressure: 250 psi (17 bar, 2 bar)
- Gauge port: 1/4 FNPT
- UL listed as high pressure, non-relief regulators
- Contains brass materials that are not compatible with anhydrous ammonia service
Single stage, adjustable high pressure regulator. The body and bonnet of both the fixed and adjustable regulators are precisely machined and feature a crimped design and fabric reinforced rubber diaphragm creating a positive seal for leak-free performance. Compact and High Pressure.
- Maximum inlet pressure: 250 PSIG (17,2 bar)
- Adjustable: 0 psi to 20 psi
- 1/4 in. FNPT inlet/outlet
- Note: not designed to provide 100% shutoff of flow
These first stage F. POL tee inlet regulators are used to reduce LP gas tank pressures for a second stage regulator (normally 10 psig) in a multiple tank manifold installation without adapters or tees. All MEC first stage regulators are red indicating high outlet pressure. Compact First stage regulator vents have 3/8 FNPT tapped ports and E-Z Grip screens located over the outlet. These regulators offer optimal relief performance that well exceeds UL test requirements providing double failure overpressure protection when used with MEC MEGR-1622, MEGR-1642 and MEGR-1652 Series Second Stage regulators. All MEC Excela-FloTM domestic regulators feature a 25 year recommended replacement life and our exclusive tear away leak check adhesive sticker.
- Max. inlet pressure: 250 psig
- Orifice size: 0.15 (compact) and 0.219 full
- Mounting holes: standard 3-1/2 center
- Pressure taps: #54 orifice 1/8 FNPT plugged (2)
Single stage, adjustable high pressure regulator. The body and bonnet of both the fixed and adjustable regulators are precisely machined and feature a crimped design and fabric reinforced rubber diaphragm creating a positive seal for leak-free performance. Compact and High Pressure.
- UL listed
- Adjustable: 0 psi to 10 psi
- Full flow POL x 1/4 in. FNPT
- Note: not designed to provide 100% shutoff of flow
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- First stage compact regulator
- ¼" x ½"
- 1,000,000 BTU
- Made in Italy
The R7003 LPG Adjustable Regulator is suggested for Cookers or Fryers using High Pressure LPG using a POL connector on inlet. High pressure 12 psi LGP outlet. Friendly operation knob.
- For cookers or fryers using LPG
- 500,000 BTU/hour capacity
- Maximum inlet pressure 250 psi
- Adjustable from 0 to 12 psi outlet pressure
- Soft nose POL inlet x 1/4 in. FNPT outlet
- UL listed
- Install outdoors only
The MEGR-130 series fixed high pressure single stage regulators are designed to provide an economical solution for pounds to pounds service applications. The MEGR-130 can be used to regulate air as well as LP gas. Regulators must be installed in compliance with federal, state or local codes or laws in accordance with NFPA 58.
- Can be used to regulate air as well as LP gas
- 1/4 in. FNPT inlet/outlet
- Pre-set at 5 psi
- BTU per hour capacity: 1,200,000 BTU per hour at 40 psi
The MEGR-130 series fixed high pressure single stage regulators are designed to provide an economical solution for pounds to pounds service applications. The MEGR-130 can be used to regulate air as well as LP gas. Regulators must be installed in compliance with federal, state or local codes or laws in accordance with NFPA 58.
- Can be used to regulate air as well as LP gas
- 1/4 in. FNPT inlet/outlet
- Pre-set at 10 psi
- BTU per hour capacity: 1,200,000 BTU per hour at 40 psi
The MEGR-130 series fixed high pressure single stage regulators are designed to provide an economical solution for pounds to pounds service applications. Can be used to regulate air as well as LP gas. Regulators must be installed in compliance with federal, state or local codes or laws in accordance with NFPA 58.
- Can be used to regulate air as well as LP gas
- 1/4 in. FNPT inlet/outlet
- Pre-set at 30 psi
- BTU per hour capacity: 1,200,000 BTU per hour at 40 psi
- Designed for use as the first regulator of a two-stage regulator system
- Compact design provides easy installation in tight installations and underground tank installations
- For domestic applications, constructed of corrosion and wear resistant materials
- Positive draining spring case
- Red straight through design vent pointing down
- Features overpressure protection, inlet screen and built in 1/8" gauge taps in both the inlet and outlet sides
- 1,100,000 BTU/HR
- 1/4" FNPT Inlet
- 1/2" FNPT Outlet
- 10 psig Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Designed for regular weight kalamein doors and hollow metal frames
- Features beveled surface leaf
- Comes with a non-rising removable pin
- Includes all necessary hardware for convenient installation
The MEGR-130 series fixed high pressure single stage regulators are designed to provide an economical solution for pounds to pounds service applications. The MEGR-130 can be used to regulate air as well as LP gas. Regulators must be installed in compliance with federal, state or local codes or laws in accordance with NFPA 58.
- Can be used to regulate air as well as LP gas
- 1/4 in. FNPT inlet/outlet
- Pre-set at 20 psi
- BTU per hour capacity: 1,200,000 BTU per hour at 40 psi
UL listed high-pressure regulator that meet a variety of applications for liquid or vapor service. The compact body design makes these regulators particularly useful in installations with space limitations. Equipped with a hand wheel adjustment.
- Maximum inlet pressure: 250 psi (17 bar, 2 bar)
- Gauge port: 1/4 FNPT
- UL listed as high pressure, non-relief regulators
- Contains brass materials that are not compatible with anhydrous ammonia service
- Designed for use as the first regulator of a two-stage regulator system
- For domestic applications, constructed of corrosion and wear resistant materials
- 3/4" FPT drip lip-vent reduces risk of blackage when properly installed
- Red straight through design vent pointing down
- Features overpressure protection, inlet screen and built-in 1/8" gauge taps in both the inlet and outlet sides
- 20 year replacement life and double failure protection
- 2,250,200 BTU/HR
- FPOL Inlet
- 3/4" FNPT Outlet
- 8-12 psig Outlet Pressure Rating
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The MEGR-1627 Series commercial/industrial regulator is a large capacity, high pressure unit for use in conjunction with MEGR-CS1200 or MEGR-S1202 Series regulators. It can also be used on final-stage (PSI to PSI) service. The diaphragm case and/or regulator body on the MEGR-1627 Series can be rotated in any of four positions to allow installation in locations with limited space. Available with a monitor or integral relief valve. The MEGR-1627 Series is perfectly suited for jurisdictional systems, grain dryers, direct fired vaporizers or other high capacity service applications.
- 1 FNPT inlet/outlet
- 1/2 in. orifice
- 10 psig outlet set point
- 25,100,000 BTU/H at 100 psi inlet
MEGR-1622H Series: Offers all the same features as the compact MEGR-1122H Series in a full-size version. Our full size MEGR-1622H Series has a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 in. FNPT tapped drip lip vent to help prevent relief vent blockage. 2,500,000 BTU/H flow capacity.
- Maximum inlet pressure: 250 psig
- Orifice size: 0.219 in.
- Outlet adjustment range: 8 psi to 12 psi
- Set point: 10 psi
UL listed high-pressure regulator that meet a variety of applications for liquid or vapor service. The compact body design makes these regulators particularly useful in installations with space limitations. Tamper-resistant spring case and 1 of 7 fixed set points: 5 psi, 10 psi, 20 psi, 30 psi, 40 psi, 50 psi or 60 psi.
- Maximum inlet pressure: 250 psi (17 bar, 2 bar)
- Gauge port: 1/4 FNPT
- UL listed as high pressure, non-relief regulators
- Contains brass materials that are not compatible with anhydrous ammonia service
Kosan regulators feature an all-aluminum body and stainless steel screws.Every regulator is UL listed and carry a 10 year warranty and 25 year service life.Unique features include stainless steel internal linkage and a tamper evident device.
- First stage compact regulator
- POL x ¾"
- 2,250,000 BTU
- Made in Italy