Pigtails - Schrader Valves

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose pol x male hard nose pol, 7/8 nut
• 1/4 tube OD
• Short nipple
• UL listed and tested in accordance with UL 569
• 20 in. OAL length
• Pull test rating of 500 and 750 lbs. respectively

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 3/8 in. tube O.D.
• Short nipple
• UL listed and tested in accordance with UL 569

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. male inverted flare x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with two brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. 20 in. length.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 1-1/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose pol x male hard nose pol, 7/8 nut
• 3/8 tube O.D
• Short nipple
• UL listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 1-1/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/2 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hog tails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. Long Nipple and 20 in. overall length.

• Male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Pull test rating of 500 and 750 lbs. respectively
• UL Listed and tested in accordance with UL 569

This check valve allows the line to be pressurized and adjusted to the desired pressure through the same valve. NOTE: To help eliminate valve failure, the valve cap should remain on the valve when line is not be pressurized or adjusted. Any dirt, debris, water or other contaminants can potentially jam the valve or compromise the sealing surface causing the valve to leak.

• Connection 1: 1/8 in. MNPT
• Connection 2: 5/16 in. to 32 male
• Thread sealant: yes
• Includes warning tag

Intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. Dielectric pigtails/ hogtails would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. UL LISTED and tested in accordance with UL 569.

• Male hard nose pol x male hard nose pol, 7/8 nut
• 1/4 tube OD
• Long nipple
• UL listed and tested in accordance with UL 569
• 7/8 hex
• Pol x pol

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 3/8 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electrical currentand to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating.

• 1/4 MNPT x male hard nose pol, 7/8 nut
• 1/4 tube OD
• Long nipple
• UL listed and tested in accordance with UL 569
• Dielectric protection
• 12 in. L
• 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

Intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. Dielectric pigtail/ hogtails would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. UL LISTED and tested in accordance with UL 569.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569
• Dielectric protection
• POL x POL

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. male inverted flare x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. Typically installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively.

• Male hard nose pol x male hard nose pol, 7/8 nut
• 3/8 tube OD
• Pull test rating of 500 and 750 lbs. respectively
• UL listed and tested in accordance with UL 569
• Pol x pol
• 7/8 hex

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. male inverted flare x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. male inverted flare x male hard nose POL, 1-1/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL Listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electrical currentand to help prevent galvanic corrosion when used on underground containers. Typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating.

• Male hard nose pol x male hard nose pol, 7/8 nut
• 1/4 tube OD
• Short nipple
• UL listed and tested in accordance with UL 569
• 20 in. L
• Dielectric protection
• 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. male inverted flare x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hogtails. Intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current.

• 1/4 MNPT x Male hard nose POL
• 7/8 in. nut
• Short nipple
• 1/4 tube OD
• POL x 1/4 MPT
• 20 in. length

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/2 in. MNPT x male hard nose POL, 7/8 in. nut
• 3/8 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose pol, 7/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hog tails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hog tail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively.

• 1/4 MNPT x male hard nose pol, 7/8 nut
• 1/4 tube O.D
• Pull test rating of 500 and 750 lbs. respectively
• UL listed and tested in accordance with UL 569

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

ME1600D Series Dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. Would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively.

• Male hard nose pol x male hard nose pol, 7/8 nut
• 3/8 tube OD
• Long nipple
• UL listed and tested in accordance with UL 569
• 7/8 hex
• Pol x pol

These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• Male hard nose POL x male hard nose POL, 7/8 in. nut
• 1/4 in. tube O.D.
• Short nipple
• UL Listed and tested in accordance with UL 569

MEC Stainless Steel braided hoses are for connecting propane cylinders to the propane regulator. The Stainless-Steel braid provides added protection to the hose along with the safety features of thermal protection in case of fire and excess ow protection in case of broken gas line. Female QCC, Type I connection x 1/4 in. inverted male flare.

• Capacity: 400,000 BTU/H
• 1/4 in. hose I.D.
• 350 psig working pressure
• Flexible thermoplastic UL and CGA approved hose

These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.

• 1/4 in. male inverted flare x male hard nose POL, 1-1/8 in. nut
• 1/4 in. tube O.D.
• Long nipple
• UL listed and tested in accordance with UL 569