Tank Valve Parts
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
1-1/4 in. Acme Gasket. For leak free seal. Durable nitrile rubber material.
- Depth: 0.145
- ID: 0.665
- OD: 0.925
- Material: Duro Nitrile / Buna
- Acme gasket
- Color: black
Forklift tank valve replacement O-ring. Color is black. UL Listed compound for use with propane.
- I.D. 0.612
- 0.818 in. O.D.
- Material: nitrile/Buna
- Replacement part
Intended to protect both internal and external relief valves ranging in size from 3/4 in. to 1-1/4 in. NPT from moisture and/or other possible contaminants. Using the universal shower cap style relief valve covers will allow technicians to carry 2 sizes that will protect the majority of domestic tank relief valves. Adjustable.
- Material: durable UV stable vinyl
- Fits 3/4 in. to 1-1/4 in. NPT internal and external relief valves
- Color: yellow
- Universal
45 Pipeaway for MEV75FIR. Especially designed for use with DOT Full Internal Pressure Relief Valves. Relieves pressure in excess of the maximum allowable working pressure.
- Material: zinc
- 45 pipe away for MEV75FIR
- Brand: MEC
- 3/4-20 UNEF-2A
- Vent assembly
- MEC part# MEP175-90
MEC MEPS-443-45A Replacement Cap. Fits MEVS-UVE443 semi internal pressure relief valves. Protect against contamination.
- With lanyard to minimize cap loss
- Fits 1 in. valves
- Color: black
- Material: vinyl
- Rain/dust cap
- Replacement part / protective accessory
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Plastic yellow acme cap for adapter protection. Rated for LP Gas use only. Chain available separately.
- 1-3/4 in. F Acme
- Color: yellow
- Style: pin hole
- Cap only
- LP gas only
- Dust cap
MEC BONNET KIT. Fits MES-PVE3329, 3250BC, 2030BC, 2034CLT, 1447C, 1449 series valves. Includes: bonnet assembly, hand wheel and self-tagging screw.
- Use an accurate torque wrench to tighten the bonnet assembly
- Never repair or clean a safety-relief device
- Always destroy a damaged or worn valve and parts so they cannot be reused
- Type: repair kit for bonnet assembly
- An MEC product
- 0.735 OAL
These protective caps are made of durable, fade resistant vinyl. All relief valves must have a protective cap to keep debris and water out of the valve. Does not include lanyard.
- Cap ID - 1.75 in.
- Cap height: 1 in.
- Color: yellow
- Universal
Replacement rain cap. Fits 1-1/4 in. semi-internal valve. Includes lanyard to minimize cap loss.
- Rain/dust cap
- Protects against contamination
- Fits MEC MEVS-UVE453 series
- Color: black
Replacement Handwheel Screw #10-32. Fits: Marshall Excelsior ME662. Manufactured in an ISO Accredited Facility.
- 3/8 in. OAL
- Certified to ANSI / NSF standard 61-9 annex G
- Replacement for Sherwood 3740-13
- Material: stainless steel
Discharge vent for MEV75FIR. DOT full internal relief valve vent. Designed to discharge gas into the atmosphere to relieve pressures in excess of the maximum allowable working pressure.
- Material: zinc
- 90 angle
- Accessory
- 3/4-20 UNEF-2A
- Vent assembly
- MEC part# MEP175-90
1-1/4 in. F. Acme Cap. Yellow Plastic. Cap only.
- 1-1/4 in. female Acme
- Style: pin hole
- Accessory: MEP147 chain
- Protective plastic cap
- Yellow plastic
- Warning: dust cap only
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
MEC Self-Cleaning replacement screw for Low Emission vent valves. Designed to minimize loss of product while allowing the operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide an effective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the Marshall Excelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect.
- Reduce emissions by 70% during normal container filling operations
- Self-cleaning
- #54 orifice
- 1/4 in. MNPT connection
- Replacement stem only
- With seal
Replacement rain/dust cap. Fits 1 in. MNPT semi-internal valves. With lanyard to minimize cap loss.
- Color: black
- Fits MEC MEVS-UVE443 series
- Available separately
- Protects against contamination
1-3/4 in. Acme Gasket. for leak free seal. Durable nitrile rubber material.
- Material: nitrile
- Color: black
- O.D. 1.344
- Id: 0.938
- Depth: 0.125 in.
- Replacement part
Replacement Handle. Fits ME662, 665, MES-3329, 3250BC, 2034CLT, 1447C and 1449 Series Valves. 2.343 in. OD.
- Aluminum material
- Replacement part
- Type: hand wheel only
- 0.080 lbs.
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
- Protective Cap For MEH225 Relief Valve
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Protective cap for MEC DOT Full Internal pressure relief valves. 3/4 in. size. black color. Extends the life of the valve.
- OAL: 4.375
- Material: UV stable thermoplastic
- Protective cap
- Sold separately
- Fits 3/4 in. internal relief valve
- with lanyard
MEC replacement hand wheel. Fits the following Multi-Service ASME Container Vapor Valves models: MES-PVE3250C, MES-3250CLG, ALG7T, ADT-7, CLM, 1427B, 1447B and 2035A. .375" ID x 2.00" OD. Handwheel only.
- Type: handwheel only
- Aluminum
- Replacement part
- ME9101P5-109 cap screw needed for assembly
- 0.375 in. I.D. x 2.00 in. O.D.
- MEC part
Replacement Bonnet Assembly. Fits MES-PVE3250 and MES-2035A Series Vapor Service Valves. Durable brass construction.
- Replacement part
- Type: repair kit
- Bonnet kit
- An MEC product
- Material: brass
- 1.047 OAL