Pressure Testing
This test block is designed to test low pressure lines for system leaks. The factory installed check valve allows the line to be pressurized and adjusted to the desired test pressure. Low Pressure.
- Inlet: 3/4 in. FNPT
- PSIG: 0-30
- Includes gauge
- Safety/test equipment
The service mans friend (METL051 and METL052) eliminates the hassle of carrying numerous bushing and fittings to each job site. It has 3 threads on one end with a hose barb and an 1/8 MNPT on the other end. A hose can easily be attached to either end and can be connected to a manometer or other ow meters to check line pressure on an appliance.
- Connection 1: METL051 5/16-32 Male / 1/8 MNPT / 1/2 MNPT
- Connection 2: standard test hose fitting/1/8 MNPT
- Material: brass
- Manufacturer part number: METL051
This test block is designed to test low pressure lines for system leaks. The factory installed check valve allows the line to be pressurized and adjusted to the desired test pressure. Low Pressure.
- Inlet: 3/4 in. FNPT
- PSIG: 0-60
- Includes gauge
- Safety/test equipment
Used for leak check test at intermediate pressure using the 30 PSI gauge and testing first stage regulator. The 35 water column gauge is used for testing low pressure second stage regulator set point and lock up press. Provided in a hard case.
- Includes 30 psi and 35 in. WC Gauges
- Includes 6 type A valves
- LP gas safety test equipment
- Note: model number suffix A or B designates which type of pressure tap valve will be used; the A designates the type VA valve (Schrader) and B designates the type VB valve (1/4 in. are)
This kit is designed to check for gas leaks by verifying the line pressure of an appliance. Each kit includes a case, gauge, and rubber hose with a bell on the end. Adjustable gauge models can be reset to zero with provided screwdriver.
- Capacity 0 - 35 water column
- Low pressure
- Rubber hose with bell
- Gauge not adjustable
Used for leak check test at intermediate pressure using the 30 psi gauge and testing first stage regulator. The 35 water column gauge is used for testing low pressure second stage regulator set point and lock up press. Provided in a hard case.
- Includes 30 psi and 35 in. WC Gauges
- Includes 6 type B valves
- LP gas safety test equipment
- Note: model number suffix A or B designates which type of pressure tap valve will be used; the A designates the type VA valve (Schrader) and B designates the type VB valve (1/4 in. are)
Low Pressure Manometer Adapter. Durable solid brass. 5/8 in. O.D.
- Female flare: 5/8 in.
- Male flare: 5/8 in.
- Hose barb: 1/2 in.
- Category: test adapter
- Low pressure
- Brass
High Pressure Test Block. Designed to test high pressure lines downstream of the container valve for system leaks. The optional bleeder valve enables the line pressure to be adjusted to the desired test pressure.
- Inlet: male hard nose pol
- Outlet: female pol
- Psig: 0-300
- Factory installed vent valve: no
1/2 in. low pressure manometer adapter. Marshall Excelsior Company Part #ME1328. Used to check for gas leaks.
- Test equipment and gauges
- Female flare: 1/2 in.
- Male flare: 1/2 in.
- Hose barb: 1/2 in.
High Pressure Test Block. Designed to test high pressure lines downstream of the container valve for system leaks. The optional bleeder valve enables the line pressure to be adjusted to the desired test pressure.
- Inlet: male hard nose pol
- Outlet: female pol
- Psig: 0-300
- Factory installed vent valve: yes