Pool Pumps
Pool Filter 2 in. Pressure Gauge Plastic. Threaded 1/4 in. Bottom Mount. Pressure Range 0-60 psi.
- Can be used on most brand name filter such has Pentair, Hayward, Waterway and Zodiac
- To be used on pool and spa filter
- 2 in. dial face
- Brass pipe threaded bottom mount
Pool Filter Pressure Gauge 2 in. Plastic. 1/4 in. Back Mount. Gauge Range 0-60 psi.
- Side mount gauge fits most D.E. filter, sand and cartridge filters
- Gauge fits on major brands including Hayward, Pentair, Waterway and Zodiac
- 2 in. dial face
- Brass pipe threaded fitting
Replacement Pump Basket. For Use With Aquaflo, Marine, Universal, Premier Pump 5 in., 475-P3-SF. Also Sta-rite 5 in. and Aladdin B-33 Pump.
- Designed to fit the most popular skimmer wells and pump pots
- Superior quality replacements are injection molded of the best materials required for optimum performance
- Has attached handle
- White
Due to state regulations this item is not available in California.
Century Square Flange Pool Filter Motor - Two Compartment - High Service Factor (Full Rated)
- 2 HP
- 230 Volts
- 3450 RPM
- 11.2 Max Amps
- Counter Clockwise Rotation
- 48Y Frame
- Sealed Ball Bearings
- Motor Length: 13-7/8"
- 1.3 Service Factor
- 2.6 THP
- Auto Protector
- 50 degree C Ambient
- Class "B" Insulation
- 60 Hz
- Capacitor Start
- Open Dripproof
- 303 Stainless steel threaded shaft
The K2 1-1/2 HP Variable Speed Pool Pump is self-priming and suitable for inground swimming pools. The DOE and CEC compliant 230V motor operates at low, medium and high speeds. The permanent magnet, totally enclosed fan-cooled (TEFC) motor provides ultra-quiet operation and maximum energy efficiency. The control panel displays current operating status, and programs 4 different timed operating modes.
- Permanent magnet, 230-Volt TEFC motor for ultra-quiet operation, reliability and maximum energy efficiency
- Delivers up to 80% energy savings compared to single speed pool pumps
- DOE and CEC compliant, may qualify for local energy rebates
- Control panel easily programs 4 different timed operating modes
- Features an industrial size strainer basket to collect debris and lengthen time between cleanings
- Includes two 1-1/2 in. union connectors for quick and easy installation and servicing
- Viton pump seal provides resistance against chemical imbalances in the water
Single Speed Max Rated 2 Horse Power Pool Pump. Voltage Rating 115/230. Quieter, cooler operated heavy-duty motor
- Reliability and performance
- Self-priming capability
- Standard efficient
- Exclusive, swing away hand knobs make strainer cover removal easy with no loose parts
- Easy installation and servicing with quick 4 bolts access to internal components
- Corrosion-proof impeller has smooth, wide openings to prevent fouling or clogging
- Heat-resistant, industrial size ceramic seal is long-wearing and drip proof
- Super-size housing and diffuser ensure rapid priming
- Mounting base provides stable, stress free support, plus versatility for any installation requirement and adapts 48- and 56-frame motors
Due to state regulations this item is not available in California.
Century Square Flange Pool Filter Motor - Two Compartment - High Service Factor (Full Rated)
- 1 HP
- 115 / 208 - 230 Volts
- 3450 RPM
- 16.0 - 8.0 Max Amps
- Counter Clockwise Rotation
- 48Y Frame
- Sealed Ball Bearings
- Motor Length: 11-7/8"
- 1.65 Service Factor
- 1.65 THP
- Auto Protector
- 50 degree C Ambient
- Class "B" Insulation
- 60 Hz
- Capacitor Start
- Open Dripproof
- 303 Stainless steel threaded shaft
Single Speed 2 Horse Power Standard Efficiency Up Rated High Head Pressure Pump. Specifically Designed For Applications Requiring Higher Pressure operation To Feed Multiple Needs Beyond Pool Circulation. Pump Components Are made From Custom Molded Thermoplastic For Superior Strength and Durability.
- Standard 2 inch suction and discharge ports permits maximum operating efficiency
- Extra large strainer basket extends time between cleanings
- Transparent strainer pot lid with comfortable handle provides easy access to strainer basket
- Diffuser and impeller provide excellent high-pressure performance for all types of demanding installations
- No tool required for removing thumbscrew drain plugs for draining and winterizing
The K2 pumps 1/4 HP Automatic Pool Cover Pump is lightweight and easy to use for removing water from pool covers and spas. Constructed of corrosion-resistant reinforced thermoplastic, the pump will remove up to 30 GPM at 0 ft. of lift. The pump is designed with a probe sensor that detects water and automatically turns the pump ON and OFF. The Strainer base snaps on and off, allowing it to be used as a submersible utility pump.
- Strainer base helps protect the pool cover, filters debris and keeps the pump stable
- Removes water up to 30 GPM at 0 ft. of lift
- Includes a 25 ft. pull rope to position the pump on the pool cover and for easy retrieval
- 1 in. MNPT discharge and garden hose adapter
- Energy-efficient, PSC oil-free motor has auto reset thermal overload protection
- Comes with a 25 ft. power cord with GFCI switch
Single Speed 1.5 Horse Power Standard Efficiency High head High Pressure Pump. Specifically Designed For Applications Requiring Higher Pressure Operation To Feed Multiple Needs Beyond Pool Water Circulation. Such as Spa Jets, In Floor Cleaning Systems.
- Made from custom molded thermoplastic for superior strength and durability
- Standard 2 in. suction and discharge ports permit maximum operating efficiency
- Extra-large strainer basket extends time between cleanings
- Transparent strainer pot lid with comfortable handle provides easy access to strainer basket
- Diffuser and impeller provide excellent high-pressure performance for all types of demanding installations
- No tool required for removing thumbscrew drain plugs for draining and winterizing
Single Speed Energy Efficient Full Rated High Head High Pressure Pump 3 Horse Power, 208 - 230 Volt, 15 - 13.6 Amps. 2-Speed Challenger Pump Models Are Now Energy Star Certified. Meets Strict Energy Efficiency Criteria Set By The U.S. Environmental Protection Agency and The U.S. Department Of Energy.
- Internal components and 2 in. ports are designed to provide rapid priming and quiet operation
- Anti-spin-off impeller
- Standard 2 in. suction and discharge ports permit maximum operating efficiency
- Extra-large strainer basket extends time between cleanings
- Transparent strainer pot lid with comfortable handle provides easy access to strainer basket
- Diffuser and impeller provide excellent high pressure performance for all types of demanding installations
- One-bolt stainless steel clamp removes easily to provide quick access for any required service
- Power end can easily be removed for service or winterizing without disturbing piping or pump support base
Due to state regulations this item is not available in California.
Century Square Flange Pool Filter Motor - Two Compartment - High Service Factor (Full Rated)
- 1-1/2 HP
- 230 Volts
- 3450 RPM
- 10.4 Max Amps
- Counter Clockwise Rotation
- 48Y Frame
- Sealed Ball Bearings
- Motor Length: 13-1/4"
- 1.47 Service Factor
- 2.21 THP
- Auto Protector
- 50 degree C Ambient
- Class "B" Insulation
- 60 Hz
- Capacitor Start
- Open Dripproof
- 303 Stainless steel threaded shaft
The Everbilt 1HP pool pump has been designed for use with permanently installed swimming pools only. A permanently installed pool is constructed in or on the ground, or in a building and is not intended to be disassembled or moved. The pump is designed to accept 1 in. suction piping. The 11/5/230-Volt single phase motor is factory pre-wired to 230-Volt. The ring and cover can be easily removed to clean leaves and debris from the basket.
- Everbilt model PCP10002
- Used with permanently installed in-ground or above-ground pool pumps
- 115-Volt/230-Volt operation
- 1-year warranty
Single Speed Max Rated 1 1/2 Horse Power Pool Pump. Voltage Rating 115/230. Reliability and performance
- Self-priming capability
- Standard efficient
- Quieter, cooler operated heavy-duty motor
- Exclusive, swing away hand knobs make strainer cover removal easy with no loose parts
- Easy installation and servicing with quick 4 bolts access to internal components
- Corrosion-proof impeller has smooth, wide openings to prevent fouling or clogging
- Heat-resistant, industrial size ceramic seal is long-wearing and drip proof
- Super-size housing and diffuser ensure rapid priming
- Mounting base provides stable, stress free support, plus versatility for any installation requirement and adapts 48- and 56-frame motors
The Everbilt 1.5 HP pool pump is designed for use with permanently installed above-ground and in-ground swimming pools. It is constructed of corrosion-resistant reinforced thermoplastic. The 115/230 Volt single-phase motor is factory preset at 230 Volts. The pump is self-priming after the initial prime. The trap cover can easily be removed to clean out leaves and debris from the basket.
- Inlet and outlet have 1.5 in. plumbing connections
- 115/230-Volt operation, preset at 230-Volt
- Fan-cooled motor with thermal overload protection
- 1-year warranty
Due to state regulations this item is not available in California.
Century Square Flange Pool Filter Motor - Two Compartment - High Service Factor (Full Rated)
- 3/4 HP
- 115 - 230 Volts
- 3450 RPM
- 12.6 - 6.3 Max Amps
- Counter Clockwise Rotation
- 48Y Frame
- Sealed Ball Bearings
- Motor Length: 11-1/4"
- 1.65 Service Factor
- 1.24 THP
- Auto Protector
- 50 degree C Ambient
- Class "B" Insulation
- 60 Hz
- Capacitor Start
- Open Dripproof
- All copper winding
- 303 Stainless steel threaded shaft
- Energy efficient
- Single speed motors
- HP x service factor must be equal or exceed motor being replaced
The K2 1-HP Variable Speed Pool Pump is self-priming and suitable for inground swimming pools. The DOE and CEC compliant 230-Volt motor operates at low, medium and high speeds. The permanent magnet, totally enclosed fan-cooled (TEFC) motor provides ultra-quiet operation and maximum energy efficiency. The control panel displays current operating status and programs 4 different timed operating modes.
- Delivers up to 80% energy savings compared to single speed pool pumps
- Permanent magnet, 230-Volt TEFC motor for ultra-quiet operation, reliability and maximum energy efficiency
- DOE and CEC compliant, may qualify for local energy rebates
- Control panel displays current operating status and programs 4 different operating modes
- Features an industrial size strainer basket to collect debris and lengthen time between cleanings
- Includes two 1-1/2 in. union connectors for quick and easy installation and servicing
- Viton pump seal provides resistance against chemical imbalances in the water
Dolphin Wave Robotic In ground pool cleaner. Clever Clean Technology. Scrubs floors, walls and waterlines.
- Cycle time 1-hours or 2.5-hours
- Full filter indicator
- Basic remote included
- 60 ft. patented swivel cable
- Includes caddy
Spider Gasket Diverter manufacture model Number 271148. Gasket is for High Flow 2 in. Top and Side Mount Clamp-on Multi-port Valve. Spider Diverter Gasket.
- Spider gasket 2 in.
- For use with high flow 2 in. top and side mount clamp-on pool and spa multi-port valve
- 2 in. multi-port valve diverter spider gasket
- Black
Challenger Pump Go-Kit. Go-Kit Includes All Gasket, O-Rings And Shaft Seal. Shaft Seal Contains Buna Elastomers, A Phenolic (Plastic) Primary Ring And Ceramic Mating Ring.
- Material works well in applications of diluted chlorine over the surface of the pump and seal
- 1 AS-200 seal, 1 O-421 diffuser O-ring, 1 O-419 housing O-ring, 1 O-301 strainer O-ring, 1 O-318 lid O-ring, 1 O-302 lid O-ring
- For use with Pac Fab challenger pumps
- Black
Pump Basket. For use with AQ And WF AQ, Whisperflo, Intelliflo Variable Speed. Also Variable Speed and Safety Vacuum Release System High Performance Pumps.
- Pump basket for Whisperflo and Intelliflo Pool pumps
- Pump basket
- Basket AQ and WF
- White
Gasket and O-Ring Kit 38. For Maxi-Glass II and Dura-Glass II Pumps. Parts Included 1 O-113 Seal Plate O-Ring, 1 O-240 Seal Plate Housing O-Ring, 1 AS-1521 Seal, 1 O-83 Diffuser O-Ring, 1 O-12 Lid O-Ring, 1 O-39 Drain Plug O-Ring.
- Gasket and O-ring kit
- For use with maxi-glass II and DuraGlass II pumps
- One O-113 seal plate O-ring, one O-240 seal plate housing O-ring, 1 AS-1521 seal, one O-83 diffuser O-ring, one O-12 lid O-ring, one O-39 drain plug O-ring
- Black
Impeller Assembly For Model AF-75 Ana AFP-75 Water Fall Specialty. Also For 3F Challenger High Pressure In Ground Pump. Pump Impeller Assembly.
- Pump impeller assembly 3 HP full rated
- For model AF-75 and AFP-75 water fall specialty pump
- For model 3F challenger high-pressure in ground pumps
- Black
3 Horsepower Impeller. For use with Whisperflo and Intelliflo Pumps. Color Black.
- 3 HP impeller
- For use with WFE-12, WhisperFlo high performance pump, IntelliFlo versus Pump, IntelliFlo versus 3050, VF and VS plus SVRS 3 HP high performance pump
- Impeller 3 HP
- Black