Heating Equipment Accessories
This is a replacement safety shut-off valve for Mr. Heater MH12- and MH24- tank top heaters. Brass construction and contains burner orifice. Electromagnetically controlled and prevents unburned propane from releasing.
- Replacement for Original Series Mr. Heater Tank Tops models: MH12, MH12C, MH12T, MH12CS, MH12TS, MH24T, MH24TS, MH42T
- Electromagnetically activated
- Prevents unburned propane release
- Contains burner orifice
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
Cadet logo hole plug. Used to fill hole left by thermostat when using wall mount thermostat. Easy to install.
- Use with C/CS/CT/CM series heaters
- Not for use in FX or LX series units
- White
- Easy to install
This fuel filter is highly recommended when purchasing the Mr. Heater Portable Buddy heaters and either the F273701 or F273702..
- Recommended when using F273701, F273702, or F298802 hoses
- Attaches directly to heater
- For use with Mr. Heater Buddy heaters: the Portable Buddy, Big Buddy, and Tough Buddy models
- Most commonly used with bulk cylinder and hose assembly
Replacement screen for Mr. Heater tank top heaters, models MH12- and MH24-. Includes replacement hardware and both a coarse mesh and fine mesh screen. The mounting holes are pre-cut.
- Replacement for original series Mr. Heater tank tops models: MH12, MH12C, MH12T, MH12CS, MH12TS, MH24T, MH24TS, MH42T
- Includes replacement hardware
- Contains both coarse mesh and fine mesh screens
- Mounting holes pre-cut
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Hanging chain kit for the Heatstar ERXL and ER2STG tube systems. 1 kit per 10 ft. of reflector. These are also included in the full ERXL and ER2STG install kits.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 2 3 ft. chains and 4 S-hooks
- Tube is aluminized steel
- See instructions for clearances
The high altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Add this side register to your Forsaire top vent and direct vent heaters to add heat to a second room. This register mounts on the side wall of a second room and must be within 10 in. of the furnace. Boots, grille, and trim material to duct up to 25% heat into side room.
- Kit includes boots, grille, damper and trim
- Designed for Forsaire top-vent and direct-vent models
- Register comes in soft-white finish
- Easy to install
Installation Kit for 60 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 125,000 - 175,000 BTU burner boxes with 60 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Williams blower accessory for Monterey top vent furnaces improves the circulation of warm air and reduces temperature differences in the room. It features a grille that is painted soft white to match the furnace casing. This blower is an accessory add-on, this is not a standard feature of the furnace.
- Improves the circulation of warm air and reduces temperature differences in the room
- Designed for use with Monterey top-vent furnace models: 2509621, 2509622, 3509621, 3509622, 5009621 and 5009622
- Grille painted soft white to match the furnace casing
- Attaches to top of Monterey furnaces with on/off switch or automatic operation
- 115-Volt
Williams offers some great solutions to make your equipment more practical and easier to use. This Digital Wall Thermostat is designed to be used with all Monterey, Direct-Vent Gravity and Console Hearth Heaters. Easy-to-read LCD screen.
- Wired thermostat or manual on/set/off
- Wall-mounted installation
- Displays room temperature in Fahrenheit or Celsius
- Battery operated
Replacement reflector hangers for the Heatstar ERXL and ER2STG tube systems. Chrome plated. 1 per 10 ft. of reflector.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 1 pair of hangers
- 1 pair per 10 ft. of reflector
- Chrome plated
The high-altitude kit for the Williams 3501521A room heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Room heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Vent limit switch for Williams furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. Board-mounted design with switch mounted on the extension straps.
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Determines when the air is warm enough to circulate
- Shuts off the burner when the air in the system exceeds a maximum temperature
- Original factory part
Williams vent adapter is provided for an installation that cannot be vented following the examples shown in the furnace installation instructions. Typically, this would be when a furnace is vented into a lined chimney. The model 9902 is for use on furnaces without a blower installed.
- Kit includes: vent adapter, fiberglass gasket and 10 screws
- Vent adapter is to be used only in a surface mounted installation of a Monterey single sided heater without a blower installed
- For freestanding applications
- Durable construction
This 180 degree u-bend tube adapter allows the Heatstar ERXL or ER2STG tube systems to redirect back. Great for ceilings with limited dimensions. Includes coupler and key for install.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 180 degree u-bend tube, coupler, and key
- Tube is aluminized steel
- Coupler and key are stainless steel
- 10 year warranty (limited to 2 years in caustic environments, such as car washes
This 12 in. tube extension is compatible with Williams Direct Vent Furnaces. To meet your installation needs, all models accommodate optional through the-wall vent which may extend up to a 24 in. maximum. Heavy duty metal for long life.
- Galvanized metal
- Allows for differences in heights
- For direct vent heater installations
- Replacement or new installation
This Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit a variety of Williams furnaces. This blower accessory features an automatic power switch as well as a power cord for added convenience and ease of use.
- Helps improve warm air circulation and reduces temperature differences in the room for comfort
- Mounts easily inside the furnace casing
- Fits Williams model numbers 2203621, 2203622, 3003621 and 3003622
- Includes an automatic fan switch and a power supply cord (115-Volt power supply required) for your convenience
- Moves air at up to 135 CFM for effective use
Floorboard provides a barrier between the heater and your home's floor. Use when your William's heater is placed on carpeting or vinyl-type flooring for best protection. Insulated metal floor board is painted to match your Williams' room console heater.
- Powder-coated black finish
- For use with Williams room console heater models 5001521, 5001522, 5001921, 5001922, 5002521, 5002522, 5002921, 5002922, 6501521, 6501522, 6501921, 6501922, 6502521, 6502522, 6502921 and 6502922
- For use when your Williams heater is placed on carpeting or vinyl-type flooring
- Insulated
Williams 36 in. Vent Enclosure fits all Forsaire Top-Vent Counterflow furnaces. The vent enclosure kit is used when the furnace is surface mounted. It encloses the vent pipe from the top of the surface to the ceiling.
- Durable metal construction
- Soft-white finish to match furnace
- Fits Forsaire top-vent counterflow furnace models: 6008532, 6008531, 3508732, 3508731, 5008732, 5008731, 6508732, 6508731, 3508332, 3508331, 5508332 and 5508331
- 12 in. or 24 in. models available to accommodate various ceiling heights