Circulator Pumps
- Incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve
- Pump's performance parameters cover nearly all traditional heating applications- from radiant and baseboards, to fan coils and zoning and many others
- 3 speeds allow to set up the circulator pump in a way that matches the system's requirements
- Wet rotor design allows it to be virtually silent while operating
Never wait for hot water again; The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed.
- Save money - up to 10% of your water bill
- Maintenance free
- Easy to install in less than 1 hour
- Additional sensor valves available for homes with multiple plumbing loops
- Hot water WHERE you need it
- Hot water when you need it
- Programmable timer is built-in so the pump turns on only when you need it
- Not for use with tankless water heaters
- Check compatibility to ensure it will work on your system
- Reliable and easy to maintain
The 007-IFC features a unique replaceable cartridge that is field serviceable. It's removable Integral Flow Check is designed to improve pump performance, simplify piping and reduce installation costs. The spring-loaded IFC replaces a separate in-line-flow check to ensure protection against reverse flow and gravity flow in your heating system.
- Replaceable cartridge
- Removeable integral flow check
- Quiet efficient operation
- Self-lubrication
The 3-Speed Service Pump is specially designed to make short work of service calls since it replaces the most commonly used circulators. It features a removable, uni-body Integral Flow Check that maximizes flow, as well as prevents gravity flow, even in the tallest buildings. Wiring is a snap thanks to an extra roomy capacitor box and convenient dual electrical knock out connections.
- 3-speed switch
- Highest performance and starting torque in class
- Replaceable cartridge design
- Self-lubrication
Taco 006 Cartridge Circulator is designed for circulating hot and chilled fresh water in a wide range of open and closed loop applications. The unique, replaceable cartridge contains all moving parts. Its self-lubricating, maintenance free design provides quiet, efficient operation and unmatched reliability.
- Recirculation pump
- 0-10 GPM
- Head range 0-9 ft.
- Connection sweat
The Astro 230SS stainless steel circulator is designed for years of maintenance free service, used for potable water recirculation systems. Large wiring box and convenient plug in terminal strip save time. High flow check valve is pre-installed.
- Astro 230SS (stainless steel flange connection)
- Wet rotor designed for quiet operation and zero maintenance
- Perfect for recirculation systems using potable water
- Built in check valve, assures correct flow direction and cuts installation cost, no separate flow check required
- Maintenance free
The Taco 007 is a cartridge style, maintenance free, wet-rotor, in-line, single stage circulator. It is designed for quiet operation in Hydronic Heating, Radiant Heating, Hydro-Air Fan Coils, Indirect Water Heating, Chilled Water cooling, and Domestic Water Systems. Available in Cast Iron or Bronze construction with universal flange to flange dimensions. The unique replaceable cartridge contains all of the moving parts and allows for easy service, instead of replacing the entire circulator. Ideal for a wide range of applications.
- Hydronic circulation pump
- Self lubricating
- Quiet, efficient operation
- Can utilize 3/4 in., 1 in., 1-1/4 in., 1-1/2 in. flanges
Armstrong 3 piece circulators use a proven design that continues to evolve. the industry accepted flange configuration makes S & H circulators the perfect solution when you need to change a pump quickly. Maintenance free design uses permanently lubricated ball bearings. Easy to repair and rebuild.
- S-25MF (Maintenance Free) Cast Iron 1/12 hp, 115/1/60, Less Flanges
- A longer circulator life without maintenance (regular oil lubrication is not required) no more oil pools on floor
- Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
- The standard for 65 years in hydronics
- Repairable, replaceable, environmentally friendly and now maintenance free
Delany # 977 C & D Bedpan Washer Less Upper Flush
- Single-speed pump with 1/25 HP powerful motor
- Polypropylene impeller with 2,800 RPM ensures reliable performance
- High-quality iron construction enables long-term use
- Suitable for 3/4 in. through 1-1/2 in. pipes
designed for quiet operation and long life, used for potable water recirculation systems. provides customers with years of trouble free operation. large wiring box and convenient plug-in terminal strip saves time. High flow valve is pre installed.
- Astro 225SSU (Stainless steel, 1/4 in. union connection)
- Wet rotor 75W- designed for quiet operation and zero maintenance
- Perfect for recirculation systems using potable water
- Built in check valve assures correct flow direction and cuts installation cost, no separate flow check required
- Maintenance free
Grundfos Comfort System - Hot Water Recirculation System
- The water circulation system that eliminates cold water runoff at the faucet using a bypass valve and pump with a timer to control water flow
- Hot Water Recirculation
- The ultimate in convenience is having hot water instantly available at sinks, appliances and bathroom faucets. The elimination of time spent waiting is especially convenient in areas where the installation of low flow showerheads and faucets are required by law
- Hot water recirculation improves the efficiency and effectiveness of household appliances including washing machines and dishwashers by having hot water available instantly
- Users can save energy by setting the 24 hour programmable timer to make hot water available during peak demand times, such as early morning and in the evening
- The recirculation pump can be installed by a certified contractor in two hours. For the average home, hot water recirculation systems generally cost a few hundred dollars, including parts and installation
- A wet rotor design for whisper-quiet and maintenance-free operation
- Stainless steel rotor cladding and canister construction, an exclusive UP 15 series feature, ensures corrosion-resistance and extended product durability
- A low-watt, two-pole motor combined with low-flow performance ensures minimum water heater operating costs, pipe and water heater wear and energy consumption
- Significant water (and sewer) disposal savings, retaining the 12,000 to 38,000
Architectural design
- Push or pull in the direction the door swings
- Available for any Adams Rite Series 4500, 4900 or 4700 deadlatch (except 4750)
- Paddle dogging ( push" versions only). Turning hex key in escutcheon holds the paddle down, leaving the door free-swinging. Dogging key provided
- Cam Plug furnished for use with Series 4500 to 4700 latches (Not used MS+1890 lock/latch)
- Available in 4 modes: Push to left, push to right, pull to left and pull to right. Can be reconfigured to any mode in the field. Dogging not to be installed in pull configuration
- Finish: Duronotic
- Cast aluminum construction for enhanced strength
- Ergonomic design ensures convenient use
- Escutcheon made of zinc alloy for enhanced protection
- Comes complete with well-furnished cam plugs for excellent security
Armstrong 3 piece circulators use a proven design that continues to evolve. the industry accepted flange configuration makes S & H circulators the perfect solution when you need to change out pumps quickly. Maintenance free design uses permanently lubricated ball bearings. Easy to repair and rebuild.
- S-25MF (Maintenance Free) All Bronze 1/12 hp, 115/1/60, Less Flanges
- A longer circulator life without maintenance (regular oil lubrication is not required) no more oil pools on floor
- Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
- The standard for 65 years in hydronics
- Repairable, replaceable, environmentally friendly and now maintenance free
The PC3F in-line, wet rotor circulator with universal flange is designed for applications in closed-loop hydronic heating and cooling systems, as well as in solar systems. The pump is non-submersible and for use in dry, frost-free, well-ventilated installations. Twist-To-Fit Universal Flange, Rotates 90 to fit most installations with a single product.
- 3 pump sizes cover every application
- 3-speed versatility maximize efficiency and provide sufficient flow rates with a single pump
- Universal design replaces wide range of competitive models with just one brand
- Twist-to-fit universal flange, rotates 90 to fit most installations with a single product
AMRAD USA MADE RUN CAPACITOR
- 70+7.5 MF 370 440 RA2000/37 44-(706+755) +/-10%
- Aluminum casing ensures strength and durability
- 10,000 AFC protected to ensure reliable performance
- OEM approved for safe operations
- Withstands extreme temperatures ranging from -40° to 70°C
Taco cartridge type pump for solar domestic hot water heating systems and domestic water circulaton. Standard flange mount with stainless steel volute. Medium head performance
Taco OnCommand Systems are manufactured using the highest quality U.S. made component parts available. Patented Integral Flow Checks (IFC) are built into each OnCommand pump to prevent cold water from entering the hot water line. Patented ACT OnCommand Electronics are the controls for each OnCommand System. This state-of-the-art electronics allows the system to accurately sense temperature and automatically shut off the system to maximize comfort and energy savings. OnCommand Systems are the only recirculation product that saves both energy and water approved by the US Department of Energy and State Energy Commissions. You can look forward to over 15 years of life expectancy with a Taco OnCommand System.
- Includes:
- "00" Cartridge circulating pump with built-in OnCommand Electronics, power cord, Integral Flow Check (IFC) and mounting bracket
- Starter button
- Set of two (2) 1/2" plumbing adapter tees
- Set of two (2) 1/2" stainless steel flex lines
- 115 volt
- 3,250 RPM
- Unique Integral Flow Checks built into OnCommand pump to keep cold water from entering the hot water line
- Patented electronics sense the temperature and automatically shut off the system for saving energy
- Approved by the US Department of Energy and State Energy Commissions
- Includes all necessary hardware for convenient installation
The PC3F in-line, wet rotor circulator with universal flange is designed for applications in closed-loop hydronic heating and cooling systems, as well as in solar systems. The pump is non-submersible and for use in dry, frost-free, well-ventilated installations. Twist-To-Fit Universal Flange, Rotates 90 to fit most installations with a single product.
- 3 pump sizes cover every application
- 3-speed versatility maximize efficiency and provide sufficient flow rates with a single pump
- Universal design replaces wide range of competitive models with just one brand
- Twist-to-fit universal flange, rotates 90 to fit most installations with a single product
Can Be Easily Cut Down For Smaller Sizes. Used For Slimfold Bi-Fold Doors. Length: 6 Ft.
- Measures 6 ft. L
- Can be easily cut to size
- Made of high-quality aluminum for durability
- Designed for use with Slimfold bi-fold doors
Armstrong Pump Coupler Assembly. Coupler Assembly., Cast Iron, 4-Spring For S45 & S46. Mfg #806168-001K
- Coupler assembly, cast iron, 4-spring for S45 & S46
- cast iron
- 4-spring for S45 & S46
- Armstrong Pumps
- A professional strength liquid drain cleaner that clears clogged drains fast
- Pours through standing water to dissolve grease, hair and other organic amtter
- Use as an alternative to acid-based drain cleaners
- Non-Acid Cleaner is harmless to pipes and fixtures and does not give off obnoxious fumes
- Easier to use than powdered drain cleaners - no mixing, no mess
- Packaged in plastic bottles with child resistent caps
- Use as directed; follow usage instructions carefully
- Industrial Strength
- Frees Drains Fast
- Pours through standing water
- Formulated to efficiently unclog plumbing drains
- Alternative to acid-based solution to dissolve grease, hair, and more
- Free from obnoxious fumes to for trouble-free cleaning
- Child-resistant cap ensures excellent safety
Maintenance Free Motor and Pump Assembly
- Permanently Lubricated, Dry Motor
- 3 Year Warranty
- Flanged Connections
- Flanges Sold Separately
- Schedule 40 ball valves
- Cold water only
- 150 PSI @ 73° F
- Made from high-quality PVC for enhanced durability
- Efficiently operates at a maximum pressure of up to 150 PSI
- Offers FIP x FIP connection
- Lead-free ball valve allows for safe use
8" X 1-1/4"
- 86 Cut Out To 161
- Conversion Plate, Mortise Lock To Key-In-Knobs
- Steel Prime Coated
- Ideal for converting an 86 cut out (mortise lock) to a 161 cut out (standard tube latch)
- High-quality steel construction ensures durability
- Primer coated for hassle-free painting
- Measures 8 in. x 1-1/4 in.