Hydronic Specialty Parts
GRUNDFOS 595926 COMFORT SERIES REPLACEMENT VALVE
- REPLACEMENT VALVE FOR UP15-10SU7P/TLC 1/25 HP RECIRCULATOR
2-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Electrical connections (in.) screw terminal block
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- Valve designed for cycling (not constantly powered on) applications
- Quick fit pushbutton powerhead makes it easy to remove for service
- Innovative motor technology offers silent operation, water hammer resist and longer life
- Series 5000 replacement powerhead is backward compatible with series 1000 zone valves
- Easy to install and operate
The Taco LWCO provides reliable protection for all types of boilers, from small residential hot water boilers to large industrial steam boilers. The boiler's minimum safe operating water level is specified by each manufacturer. Should the water level dip below that specified level, heat will accumulate quickly causing significant damage to the boiler and a potential external safety hazard. The Taco LWCO prevents this hazard from occurring. The LWCO can be used as a primary or secondary low water cutoff on steam boilers up to 250 psi, a primary limit control on hot water boilers or to protect pumps from running dry in condensate receiver tank applications. The LWCO can also activate alarm systems or automatic water feeders.
- Patented adjustable probe sensitivity
- External LEDs and simplified wiring for easy installation and testing
- Automatic or manual reset mode
- Standard on-board (NEMA 1) or remote (NEMA 4) probe
- LT models include external test button, adjustable Delay on Break (DOB) and Delay or Make (DOM) features
Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.
- Isolated end switch
- 24 VAC powered
- For Taco series 570 zone valves (570, 571, 572, and 573)
- Allows for service of valve without removing it
Armstrong factory Circulator Pump Oil. 1/2 Oz. Easy to use. Convenient size makes over oiling a non-issue.
- Factory replacement
- Easy to use tube
- For use on S & H circulators
- Can be used on B and G pumps
- meets factory specifications
- SAE 20
- Detergent free
- Lead free
- Equals B & G L23401
- Lubricates bearing assembly
lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.
- For use with Astro 220 and 225 SSU models
- 1-1/4 in. NPSM x 3/4 in. sweat
- Lead free
- Set contains 2 half unions and gaskets
- Easy to install
- For use with copper pipe
- Water tight connection
- High quality
- Genuine factory replacement
- Complies with California & Vermont lead free laws
Long lasting metal fin-tool that straightens and cleans condenser and evaporator fins. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- 1 tool for all units
- Heavy-duty spring wire bristles automatically adjust to all fin spacing's
- Exclusive tension adjustment band is featured to allow maximum rigidity and ease of operation
- Straightens most severely damaged fins
- Stainless steel teeth
- Cushioned red handle to protect your knuckles
- Straightens damaged condenser and evaporator fins quickly and easily
- Increases air conditioner efficiency
- Helps keep air conditioners, condensing units running efficiently
- Works on most air conditioning and refrigeration coils
This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum Safe Operating Pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
Body gasket for use on the Armstrong S and H circulators. Genuine factory replacement. Long lasting and matched to fit Armstrong and competing models.
- 3-3/32 in. OD x 2-25/32 in. ID x 1/32 in. thick
- Factory replacement
- High quality
- Used on Armstrong S-25
- Fits on B and G 75 series
- Replaces B and G P04080
- Fits on B and G 100 series
- Fits on B and G 150 series
- Interchangeable with B and G
This 3/4 in. hose connection vacuum breaker permits the attachment of portable hoses to hose thread faucets and prevents the reverse flow of polluted water into the potable water supply due to backsiphonage. It consists of a brass body construction, stainless steel working parts, and a rubber diaphragm and disc. It is secured with allen head set screw. It is ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses. Check with local inspection authorities for installation requirements. Maximum pressure is 125 psi (8.6 BAR).
- Brass body
- Durable rubber diaphragm and disc for consistent positive seating
- Allen set screw
- Includes rubber diaphragm and disc and draining stem
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses
- Maximum pressure is 125 psi
Beacon/Morris -- Heatrim. 3/4" Copper Tube with 50-52 Aluminum Fins Per Foot. Dent-Resistant Front Panel. Pivot-Mounted Damper. 7-3/8" H, Extends 2-11/16" From Wall. Length: 90 Outside Corner.
SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding. Used in Residential or Commercial closed loop hydronic heating or chilled water systems. Can be cleaned in place.
- Stainless steel concentrator which eliminates gurgling noise
- Bronze body for rigid construction
- No clog vent
- Dirt and debris resistant
- Sweat connections
- 1/2 in. connection size
- Operating temperature range (F)240 degree F maximum
- 22 Cv capacity
- Maximum safe operating pressure 125 psi
- Rugged design stands up to tough conditions and continuous service
This 3/4 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of chrome plated body, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.
- Lead free construction
- Chrome finish
- Female NPT inlet and outlet
- Hot or cold water
- Designed to prevent the backflow of polluted water from entering into the potable water supply
- Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
- Maximum pressure is 125 psi
ThIS Boiler Rest Control is designed to improve performance in your hot water heating systems by regulating the supply water temperature of a single boiler based on the outdoor temperature. It utilizes a heating curve to set the relationship between outdoor temperature and supply water temperature to provide optimum control and comfort. Thanks to its integral microprocessor, the PC700 Boiler Reset Control is able to continuously adjust the boiler differential to avoid boiler short-cycling and large temperature swings, Standard functions include warm weather shut down, minimum boiler supply temperature setting, and a starting water temperature setting.
- Regulates water supply temperature of a boiler
- Helps avoid short cycling of the boiler
- Liquid crystal display for temperature
- Warm weather shut down feature
Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 16".
The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.
- Repair part
- Includes casing body bolts
- Easy to install
- 3-year warranty
- Replacement Cartridge Assembly For Taco 007 Cast Iron Circulators
- Repair Part
- Select 007 Pump Models
- 005 Pump Model 005-F2-4
- Cast Iron
 3" Bottom Entry Pressure & Temperature Gauge (0-75 psi)
- Black enamel steel case
- Kostil polymer window
- Copper alloy bourdon sensing element
- Tin alloy welding
Zurn AG-4 Air Gap 3/4 "- 1"
- Reduces downtime of attaching a drain line to a Reduced Pressure Principle Assembly
- Available for all Zurn Wilkins Reduced Pressure Principle Assemblies
- Eliminates cross connection between the drain and potable water supply
- Zinc-plated steel bolts resists corrosion