Municipal Plumbing

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Perma-Liner Epoxy Base A is an undiluted clear liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, Perma-Liner Epoxy Base A has become the standard epoxy resin used in CIPP lining.

• 100% solids epoxy resin (part A)
• Requires cross-linking or hardened with specific temperature rated Part B for appropriate ambient conditions; hot, warm, and cold, or heat curing
• Temperature rated to 120 degree
• Pot life determined by Part B curing agent
• Tested and compliant with NSF / ANSI 14
• Sold in 53 lb. buckets

PERMA-LINER Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation. Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed PERMA-LINER to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Epoxy Resin Part B is a moderately reactive curing agent for epoxy resins. It can be used as a sole curing agent or as a co-curing agent for applications requiring moderate cure speed. Advantages are low viscosity, rapid cure, and water insensitive.

• PERMA-LINER epoxy resin part B curing agent for heat assist
• For use in heat-assist curing applications
• To be combined with PERMA-LINER epoxy resin part A
• Sold in 44 lbs. buckets number 9
• Resin is marked with a number 9 hazmat marking
• Resin is used inconjunction with liner

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Epoxy Resin Part B is a moderately reactive curing agent for epoxy resins. It can be used as a sole curing agent or as a co-curing agent for applications requiring moderate cure speed. Advantages are low viscosity, rapid cure, and water insensitive.

• Perma-liner epoxy resin part B curing agent for hot weather
• For use in ambient temperatures greater than 70 degree
• To be combined with perma-liner epoxy resin part A
• Temperature rated to 120 degree
• Pot life of 30 minutes at 77 degree F
• Tested and compliant with NSF/ANSI 14
• Sold in 44 lbs. buckets

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-Liner calibration tube for 6 in. Pipes
• Reinforced polymer tube used to hold liner against the host pipe and prevent over expansion
• PVC coated polyester scrim, stitched and taped seams
• Sold in 300 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion systems
• Calibrates ambient, steam, or hot water cured liner in multiple bends
• Clear tube provides visual verification of liner placement and curing process

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-lateral scrim liner for 4 in. Pipes
• 3 mm with PVC coating and polyester scrim reinforcement
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 300 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion system

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-Liner calibration tube for 4 in. Pipes
• Reinforced polymer tube used to hold liner against the host pipe and prevent over expansion
• PVC coated polyester scrim, stitched and taped seams
• Sold in 300 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion systems
• Calibrates ambient, steam, or hot water cured liner in multiple bends
• Clear tube provides visual verification of liner placement and curing process

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation. The Insignia O-Ring product and process consists of providing a full-circle seal at the ends and overlapping points of a liner by using a cylindrical ring of hydrophilic material specifically tailored to provide cured in place pipe installation with a level of water-tight compression gasket sealing comparable to new piping installation at the ends of a Cure in-Place liner

• Insignia 6 in. O-Ring product provides a uniform seal and consistent wall thickness around the pipe end after installation of a pipe liner
• O-Ring product and process consists of a hydrophilic material that does not shift or move during installation of a cured in-place rehabilitative pipe liner
• O-Ring becomes embedded between the liner and host pipe
• After sufficient contact with water the O-Ring swells effectively creating a compression gasket seal
• For use with both ambient and heat cured processes
• Sold individually, to be used with 6 in. pipes
• Patented technology to be used solely with Perma-Liner installation equipment and liners

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Epoxy Resin Part B is a moderately reactive curing agent for epoxy resins. It can be used as a sole curing agent or as a co-curing agent for applications requiring moderate cure speed. Advantages are low viscosity, rapid cure, and water insensitive.

• Perma-liner epoxy resin part B curing agent for warm weather
• For use in ambient temperatures between 50 degree to 70 degree
• To be combined with perma-liner epoxy resin part A
• Temperature rated to 120 degree
• Pot life of 16 minutes at 77 degree F
• Tested and compliant with NSF/ANSI 14
• Sold in 44 lbs. buckets

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-flex scrim liner for 4 in. Pipes
• 4.5 mm liner with PU coating
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 200 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion system and multiple back-to-back hard bends or P-traps

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-flex scrim liner for 6 in. Pipes
• 4.5 mm liner with PU coating
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 200 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion system and multiple back-to-back hard bends or P-traps

Perma-liner's patented pending technology comprises of polyester non-woven fabric tube coated with super flexible TPU coating. This coating helps in smooth and easy installation due to its versatile thermoplastic characteristics that provides very high elasticity. Further elasticity helps in easy installation in smaller diameters at lower pressures and temperatures.

• Maximum coating elasticity
• Ease in installation using low pressure
• Excellent wet out characteristics
• Installation simplicity around bends
• Perma-liner
• WRT

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation. Our experience in CIPP (cure-in-place-pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology.

• Perma-Liner pull tape - blue - 2 in. width, 500 ft. roll
• Woven polyester strap with tensile strength rating of 6000 lbs.
• For use with inversion liner system
• For use with both ambient or heat curing applications
• Sold in rolls of 500 ft.

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-lateral scrim liner for 6 in. Pipes
• 3 mm with PVC coating and polyester scrim reinforcement
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 300 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion system

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Epoxy Resin Part B is a moderately reactive curing agent for epoxy resins. It can be used as a sole curing agent or as a co-curing agent for applications requiring moderate cure speed. Advantages are low viscosity, rapid cure, and water insensitive.

• Perma-liner epoxy resin part B curing agent for cold weather
• For use in ambient temperatures between 30 degree to 50 degree
• To be combined with perma-liner epoxy resin part A
• Temperature rated to 120 degree
• Pot life of 10 minutes a 77 degree F
• Tested and compliant with NSF/ANSI 14
• Sold in 44 lbs. buckets

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation. The Insignia O-Ring product and process consists of providing a full-circle seal at the ends and overlapping points of a liner by using a cylindrical ring of hydrophilic material specifically tailored to provide cured in place pipe installation with a level of water-tight compression gasket sealing comparable to new piping installation at the ends of a Cure in-Place liner

• Insignia 4 in. O-Ring product provides a uniform seal and consistent wall thickness around the pipe end after installation of a pipe liner
• O-Ring product and process consists of a hydrophilic material that does not shift or move during installation of a cured in-place rehabilitative pipe liner
• O-Ring becomes embedded between the liner and host pipe
• After sufficient contact with water the O-Ring swells effectively creating a compression gasket seal
• For use with both ambient and heat cured processes
• Sold individually, to be used with 4 in. pipes
• Patented technology to be used solely with Perma-Liner installation equipment and liners

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-lateral transitional flex liner for 3 in. - 4 in. pipes
• 5 mm liner with PVC coating and polyester scrim for reinforcement
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 150 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with perma-liner inversion system

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Epoxy Resin Part B is a moderately reactive curing agent for epoxy resins. It can be used as a sole curing agent or as a co-curing agent for applications requiring moderate cure speed. Advantages are low viscosity, rapid cure, and water insensitive.

• Perma-liner epoxy resin part B curing agent for heat assist
• For use in heat-assist curing applications
• To be combined with perma-liner epoxy resin part A
• Temperature rated to 120 degree
• Pot life of 90 minutes at 77 degree F
• Tested and compliant with NSF/ANSI 14
• Sold in 44 lbs. buckets

PERMA-LINER Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed PERMA-LINER to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls. Epoxy Resin Part B is a moderately reactive curing agent for epoxy resins. It can be used as a sole curing agent or as a co-curing agent for applications requiring moderate cure speed. Advantages are low viscosity, rapid cure, and water insensitive.

• PERMA-LINER epoxy resin part B curing agent for heat assist
• For use in heat-assist curing applications
• To be combined with PERMA-LINER epoxy resin part A
• Temperature rated to 120 degree
• Pot life of 90-minutes at 77 degree F
• Tested and compliant with NSF/ANSI 14
• Sold in 44 lbs. buckets

PERMA-LINER Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-lateral transitional flex liner for 4 in. to 6 in. pipes
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 90 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with PERMA-LINER inversion system
• 4 mm liner with PVC coating and polyester scrim for reinforcement

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-lateral transitional flex liner for 4 in. to 6 in. pipes
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 120 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with perma-liner inversion system
• 4 mm liner with PVC coating and polyester scrim for reinforcement

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. Since 1999 PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-Liner calibration tube for 3 in. Pipes
• Reinforced polymer tube used to hold liner against the host pipe and prevent over expansion
• PVC coated polyester scrim, stitched and taped seams
• Sold in 300 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with Perma-Liner inversion or pull-in-place systems
• Calibrates ambiently cured liner in multiple bends
• No heat assist

This is 4 in. UV inversion liner. The Liner is pre wet out and delivered to the customer ready to install. This is used with the LRI equipment.

• UV
• Inversion
• Liner
• Pre wet out
• 100 ft.
• Used with LRI

This bladder is 4 in. and is 300 ft. in lengths. This is used with the LRI UV systems. The bladder is clear to allow the LED lights to cast the liner.

• 4 in.
• TPU
• Bladder
• 300 ft.
• Used with UV inversion liner
• LRI

Perma-Liner Industries (PLI) is the leading manufacturer and supplier of trenchless pipeline rehabilitation equipment and materials in North America. PLI has developed systems to rehabilitate existing sewer systems without excavation Our experience in the CIPP (Cure-In-Place-Pipe) industry has allowed Perma-Liner to design, patent, and manufacture state of the art technology. No digging up floors, landscaping, driveways and walks, or tearing up walls.

• Perma-lateral transitional flex liner for 4 in. to 6 in. pipes
• Non-woven, needle-punched felt polyester, stitched and taped seam
• Sold in 330 ft. rolls
• Compliant with ASTMF 1216 and national plumbing codes - F2561, F3240, F3097, F3033, F2599
• Designed for use with perma-liner inversion system
• 4 mm liner with PVC coating and polyester scrim for reinforcement