Brackets

Holdrite galvanized support bracket solutions provide the optimal solution for a wide variety of applications. Ideal for sinks, lavatories and toilet stub-outs. The use of Holdrite galvanized steel bracket solutions are versatile, fast and easy to install. The 103-18-H is compatible with PEX, copper and CPVC.

• Versatile bracket ideal for sink, lavatory and toilet stub-out solutions
• Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
• Integrates with 701-H and 704-H stub-out clamps with patented connection
• Pipe size 1/2 in., 3/4 in. and 1 in.
• Support sink/lavatory and toilet stub-out
• UPC/IPC/IAPMO listed
• 25 lbs. load rating

The HOLDRITE 103-26 is a 14-Gauge galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers. Positions 1/2 in., 3/4 in. or 1 in. copper or CPVC tubing and 3/8 in. or 1/2 in. PEX. This versatile bracket should be used with HOLDRITE inserts.

• Galvanized steel bracket with 1-3/8 in. keyed holes on 2 in. centers
• Versatile bracket ideal for sink, lavatory and toilet plumbing solutions
• Integrates with HOLDRITE clamps #701 and #704 with patented connection
• Positions 1/2 in., 3/4 in. or 1 in. copper or CPVC tubing and 3/8 in. or 1/2 in. PEX
• 25 lbs. load rating
• UPC/IPC/IAPMO Listed

Bracket 15 hold 24-Gauge with eight 1/2 in., four 3/4 in. and three 1 in. holes. Can be nailed or screwed to wood or metal studs. Brackets available with several hole patterns. Simple installation, just nail bracket in place and solder the pipe to bracket.

• Can be nailed or screwed to wood or metal studs
• Brackets available with several hole patterns
• Just nail bracket in place and solder the pipe to bracket
• Bracket
• 24-Gauge
• Simple installation

The ApolloPEX 1/2 in. PEX Pipe J-Hook Pipe Support (10-Pack) is simple to install and features a collar design for the securing of PEX pipe to joists or studs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing. It is designed for implementation in water delivery systems, simple or complex.

• Constructed of durable plastic for superior reliability and strength
• Collar design holds PEX tubing in place
• Use with PEX tubing (not included)
• For use with 1/2 in. pipe
• Includes 10 clamps

The ApolloPEX 3/4 in. PEX Pipe J-Hook Pipe Support (10-Pack) is simple to install and features a collar design for the securing of PEX pipe to joists or studs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing. It is designed for implementation in water delivery systems, simple or complex.

• Constructed of durable plastic for superior reliability and strength
• Collar design holds PEX tubing in place
• Use with PEX tubing (not included)
• For use with 3/4 in. pipe
• Includes 10 clamps

Ideal for use in both residential and commercial applications, Water-Tite Sure-Tite Support Brackets are a convenient and economical alternative to fabricating brackets or cutting wood blocks. Designed for use on lavatories, toilets, hose bibs, water heaters, or any water supply penetrating a wall, these metal supports can be easily nailed or screwed to wood or metal studs and then soldered to piping. Sure-Tite Support Brackets are available in lengths of 20 or 26 inches with several hole patterns to fit a variety of needs.

• Durable support brackets; available with multiple hole configurations
• For use on lavatories, toilets, hose bibs, water heaters, or any water supply penetrating a wall
• Less expensive and time-consuming than fabricating brackets or cutting wood blocks
• Can be nailed or screwed to wood or metal studs
• Copper-plated steel or galvanized-steel models available in 20- or 26-inch lengths
• Copper plated

Gerber's wall-hanger is especially designed for our wall-hung bathroom sinks and 27-740 urinal. The durable iron/stainless steel bracket will help support your bathroom sink option. The products construction helps with the easy for installation.

• Especially manufactured for Gerber's bathroom sinks and 27-740 urinal
• Durable and reliable construction
• Available for warranty repair
• Easy to install
• Screws not included
• Genuine gerber part
• Limited Lifetime Warranty

The 1/2 in. 4-Hole 90 degree Angle Bracket is manufactured from 12-Gauge gold galvanized metal to support conduit along an angle. The premium Gold-Galvanized finish resists rust, corrosion and provides a superior paint base. Bracket is for use with 12-Gauge Strut.

• Bracket for use with 12-Gauge strut
• Gold galvanized finish
• Designed for angled fitting
• 4 installation holes
• Nuts and bolts not included
• Standard bolt for the 9/16 in. hole is a 1/2 in. hex head cap screw 15/16 in. L
• 15/16 in. L may be used with all series channel

The ApolloPEX 1/2 in. Poly Alloy PEX Pipe 90 Bend Support with Mounting Bracket is simple to install and designed to provide a secure 90 support for stub-outs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing. It is designed for implementation in water delivery systems, simple or complex.

• Constructed of durable plastic for superior reliability and strength
• Use with PEX tubing (not included)
• Compatible with 1/2 in. pipe
• Corrosion resistant
• For use with the fittings, valves, manifolds and accessories of the Apollo PEX system

Holdrite 601-20-H provides the optimal solution for a wide variety of applications. Ideal for sinks, lavatories, water heaters, toilet stub-outs, shower heads and tub spouts. The use of Holdrite CPVC solutions is the versatile, fast and easy method to install CPVC. In most instances plumbing contractors can rough in a fixture in minutes, creating a shop standard install.

• Galvanized steel bracket provides proper pipe positioning and alignment
• For pipe size 1/2 in. and 3/4 in. CTS
• Compatible with all CPVC and PVC tubing and cements
• Protects tubing from damage

The HOLDRITE Stout System is suited for lavatory, shower, toilet, water heater and various vertical and horizontal applications. The multi-purpose galvanized steel brackets can be used nearly anywhere and are ideal for applications where high strength is required. The slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally. They attach between studs or joists and a bendable end tab design allows for recessed or surface mounting.

• Telescoping design supports copper, PEX, CPVC and many other types of piping
• Have a maximum uniform load rating of 1150 lbs.
• Includes 4 screws
• Slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally
• Attach between studs or joists and a bendable end tab design allows for recessed or surface mounting
• Adjustable range 10 in. to 18 in.

Use it like a Half Clamp or a Full Clamp. For all metal and plastic 3/4 in. size materials. Allows for expansion and contraction of supply tubing.

• Installs 3 ways
• Greatly reduces the chances for noise
• No pinning
• No binding
• Available in sizes that support 1/2-, 3/4-, or 1-inch pipes
• 3/4 in.

HOLDRITE Commercial Copper Supports are the engineered solution for copper tubing support. The HOLDRITE 101-26 copper bonded bracket eliminates the need for makeshift methods and establishes an easy, professional install every time. The tubing is soldered onto the bracket, allowing the plumbing contractor to heat the pipe, not the bracket. HOLDRITE commercial copper supports are meet the Buy America Act requirements.

• Ideal for lavatory and toilet
• Ideal for copper bullets requiring a more rigid installation
• Copper-bonded, steel bracket
• 5/8 in. holes on 2 in. centers
• Attaches to stud wall framing
• 25 lbs. load rating

Sioux Chief's PowerBar universal adjustable bracket shall be used where necessary for supporting pipes or stub outs. Bracket shall be corrosion resistant, adjust telescopically and have dual fastening tabs on each end. Pilot holes for #6 #10 screws shall be provided on 3 sides of the bracket. Bracket shall be available in 2 different sizes to accommodate 16 in. or 24 in. stud bays and packaged with or without screws for fastening each tab to structure.

• Optional adjustable channel clamps with elastomer inserts for fastening any pipe, tube, cable, etc. shall be available
• Bracket shall be approved for use with copper tube, CPVC tube, PEX/PB tube, steel pipe, drop ear or high ear brass 90 fittings or other water supply or DWV fittings, CSST lines, plastic or steel conduit, and low voltage DataCom cable
• Bracket shall be IAPMO certified
• Adjust bracket to desired length (bracket must have a minimum overlap of 2 in. in center)
• It is permissible to use one bracket section and fasten directly through channel
• Bracket: 20 gauge (0.036 in. +/- .003) galvanized steel

The Holdrite Stout System is suited for lavatory, shower, toilet, water heater and various vertical and horizontal applications. The multi-purpose galvanized steel brackets can be used nearly anywhere and are ideal for applications where high strength is required. The slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally. They attach between studs or joists and a bendable end tab design allows for recessed or surface mounting.

• Telescoping design supports copper, PEX, CPVC and many other types of piping
• Have a maximum uniform load rating of 225 lbs.
• Includes 4 screws
• Slot-and-hole pattern permits wide versatility in positioning; clamps and fittings can be mounted vertically or horizontally
• Attach between studs or joists and a bendable end tab design allows for recessed or surface mounting
• Ideal for lavatory, shower, toilet, vertical, and horizontal applications

The ApolloPEX 1/2 in and 3/4 in. 2-in-1 PEX Pipe J-Hook Pipe Support (10-Pack) is innovative and simple to install. It features a unique collar design for the securing of either 1/2 in. or 3/4 in. PEX pipe to joists or studs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of durable plastic for superior reliability and strength
• Collar design holds PEX tubing in place
• Use with PEX tubing (not included)
• For use with 1/2 in. or 3/4 in. PEX tubing
• On j-hook for two sizes
• Extended length fastener for additional stability and security

Holdrite 601-26-H provides the optimal solution for a wide variety of applications. Ideal for sinks, lavatories, water heaters, toilet stub-outs, shower heads and tub spouts. The use of Holdrite CPVC solutions is the versatile, fast and easy method to install CPVC. In most instances plumbing contractors can rough in a fixture in minutes, creating a shop standard install.

• For pipe size 1/2 in. and 3/4 in. CTS
• Galvanized steel bracket provides proper pipe positioning and alignment
• Compatible with all CPVC and PVC tubing and cements
• Protects tubing from damage

HOLDRITE 604 provides the optimal solution for a wide variety of applications. Ideal for sinks, lavatories, water heaters, toilet stub-outs, shower heads and tub spouts. The use of HOLDRITE CPVC solutions is the versatile, fast and easy method to install CPVC. In most instances plumbing contractors can rough in a fixture in minutes, creating a shop standard install.

• Insert is lockable and glueable
• Insert is grooved, creating stronger glue joint
• For pipe size 1/2 in. CTS
• Compatible with all CPVC and PVC tubing and cements
• Provides proper pipe positioning during installation
• Corrosion resistant

Bracket Copper 26 in. Can be nailed or screwed to wood or metal studs. Brackets available with several hole patterns. Simple installation, just nail bracket in place and solder the pipe to bracket.

• Durable support brackets; available with multiple hole configurations
• For use on lavatories, toilets, hose bibs, water heaters, or any water supply penetrating a wall
• Less expensive and time-consuming than fabricating brackets or cutting wood blocks
• Can be nailed or screwed to wood or metal studs
• Copper
• Easy install

The ApolloPEX 1/2 in. and 3/4 in. 2-in-1 PEX Pipe J-Hook Pipe Support (40-Pack) is innovative and simple to install. It features a unique collar design for the securing of either 1/2 in. or 3/4 in. PEX pipe to joists or studs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of durable plastic for superior reliability and strength
• Collar design holds PEX tubing in place
• Use with PEX tubing (not included)
• For use with 1/2 in. or 3/4 in. PEX tubing
• On j-hook for 2-sizes
• Extended length fastener for additional stability and security

The ApolloPEX 3/4 in. Plastic PEX Pipe 90 Bend Support with Mounting Bracket is simple to install and designed to provide a secure 90 support for stub-outs. Helps reduce added work by reducing the need for additional elbow fittings. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of plastic for superior reliability, strength, durability and corrosion resistance
• For use with 3/4 in. PEX tubing (sold separately)
• Mounting bracket allows for securing to structural supports for stability
• Design allows for tight radius while preventing kinks
• Ideal for potable water and hydronic heating applications

The ApolloPEX 1/2 in. PEX Stub-Out Bend Support (2-Pack) provides ultimate stability for stub-outs for stop valve connections to plumbing fixtures. The bend support bar is 20 in. W and mounts in-between 2 studs, with holes 2 in. apart to position the PEX 90 bend supports (not included). It eliminates the need for copper stub-out elbows. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Designed for use with the Apollo PEX bend support bar
• Constructed of durable plastic for superior reliability and strength
• Use with PEX tubing (not included)
• Compatible with 1/2 in. pipe
• Corrosion resistant
• For use with the fittings, valves, manifolds and accessories of the Apollo PEX system

The ApolloPEX 3/4 in. Plastic Insulated Stud Suspension Clamp (10-Pack) provides ultimate stability for stub-outs for stop valve connections to plumbing fixtures. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing. It is designed for implementation in water delivery systems, simple or complex.

• Constructed of durable plastic for superior reliability and strength
• Supports PEX tubing
• Available in 1/2 in., 3/4 in., and 1 in. sizes
• For use with 3/4 in. pipe
• Used to hang pipe below joists for support

The ApolloPEX 1/2 in. Metal PEX Pipe 90 Bend Support is simple to install and designed to provide a secure 90 support for stub-outs. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing. It is designed for implementation in water delivery systems, simple or complex.

• Constructed of metal for superior strength and durability
• Use with PEX tubing (not included)
• For use with 1/2 in. pipe
• For use with the fittings, valves, manifolds and accessories of the Apollo PEX system
• Supports tubing around 90 angles