Push-To-Connect Tees
The 1/2 in. x 1/2 in. x 1/2 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 68
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The 1/2 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 3/4 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 69
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The 3/4 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
Use this BrassCraft push connect tee to connect copper, PEX and other good quality plastic tubing. These can be used with hot and cold water, air, vacuum and non-volatile liquids. Engineered of the highest quality, the units can endure 150 psi at 70 degree F and 60 psi at 140 degree F. Installation instructions are include.
- Used to connect to copper, PEX and other good quality plastic tubing
- Zero-leak connections
- Rated for 150 psi at 70 degree F and 60 psi at 140 degree F
- No tools needed
- No tube inserts are required
- Easy to use
The 3/4 in. x 3/4 in. x 1/2 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 63
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The 3/4 in. x 1/2 in. x 3/4 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-Rings compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 3/4 in. x 3/4 in. x 1/2 in. SharkBite Push-to-Connect Reducing Tee allows you to make a connection from 3/4 in. Pipe and reduce down at the tee to 1/2 in. pipe. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 3/8 in. (1/2. in O.D.) SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Designed for potable water distribution as well as hydronic heating applications
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
Use the SharkBite 3/4 in. x 1/2 in. x 1/2 in. Brass Push-to-Connect Tee to join combinations of copper, CTS cPVC and PEX tubing (all sold separately). This fitting is constructed from durable brass and features a lead-free design. It is certified for use underground and in behind-the-wall applications.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Rated to 200 ° F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 1 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 70
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
The 3/4 in. x 1/2 in. x 3/4 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 62
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
Use this BrassCraft push connect tee to connect copper, PEX and other good quality plastic tubing. These can be used with hot and cold water, air, vacuum and non-volatile liquids. Engineered of the highest quality, the units can endure 150 psi at 70 degree F and 60 psi at 140 degree F. Installation instructions are include.
- Used to connect to copper, PEX and other good quality plastic tubing
- Zero-leak connections
- Rated for 150 psi at 70 degree F and 60 psi at 140 degree F
- No tools needed
- No tube inserts are required
- Easy to use
SharkBite 1/2 in. Push-to-Connect Brass Tee Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.
- Push-to-Connect fittings are ideal for installation in tight spaces
- Rated to 200 degree F and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
- 5-Year Warranty when used with SDR-9 HDPE Pipe
The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force applied by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.
- Stainless steel for durability
- Easy 1-handed operation
- Color coded handle matches corresponding color on fitting bag
- Available in 1/2 in., 3/4 in. and 1 in. sizes
- Used with SharkBite copper tube size push-to-connect fittings
- SharkBite fittings can be used to connect copper, PEX or CPVC in any combination
The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force applied by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.
- Stainless steel for durability
- Easy 1-handed operation
- Color coded handle matches corresponding color on fitting bag
- Available in 1/2 in., 3/4 in. and 1 in. sizes
- Used with SharkBite copper tube size push-to-connect fittings
- SharkBite fittings can be used to connect copper, PEX or CPVC in any combination
The SharkBite 3/4 in. Push-to-Connect x 3/4 in. Push-to-Connect x 3/4 in. Female NPT Slip Tee is used to connect copper and CPVC pipes. The Slip tee allows for the fitting to be inserted onto the pipe and then using the disconnect tool slipped back onto the other end of the pipe. This allows for up to a 2 in. section of the pipe to be removed and then repaired without having to add additional pipe. This slip tee is perfect for removing a section of pipe and adding in an expansion tank for your water heater, the FNPT Tee is threaded so you can screw in the Expansion tank after installing the tee to the line.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC, and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 3/4 in. pipe insertion depth = 1-1/8 in.
The 1 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Rated to 200 degree F and 200 psi
- Meets all UPC, IPC and cUPC requirements
The 3/4 in. x 1/2 in. x 1/2 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 64
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 in. of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 ° F and 400 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- Code approved, IAPMO listed, for details see Specifications
- 25-year warranty when used with CPVC & copper pipe
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 ° F and 400 PSI
The SharkBite PVC IPS (Iron Pipe Size) Disconnect Clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The 3-Pack contains a 1/2 in., 3/4 in. and 1 in. Disconnect clip. The PVC Disconnect Clip will release the fitting on the White Collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth.
- Lightweight and durable plastic construction
- Disassembly is fast and easy using the disconnect clip
- Use to mark proper safe seal insertion depth on pipe for SharkBite fittings
- Will release the white collar of a SharkBite iron pipe size fitting on Sch. 40, 80, 120 PVC and Sch. 40 and Sch. 80 CPVC
- 3-pack contains 1/2 in., 3/4 in. and 1 in. disconnect clip
- Long lasting material
SharkBite Push-to-connect PVC transition fittings are the fastest way to transition from PVC or IPS (iron pipe size) pipe to PEX, copper, CPVC, PE-RT, or HDPE pipe. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe, and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. The fitting has a white-collar for the PVC pipe and a tan collar for all CTS (copper tube size: PEX, copper, CPVC, PE-RT, HDPE) pipes. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
- Compatible with schedule 40, 80, 120 PVC pipe
- Push-to-connect fittings are ideal for installation in tight spaces
- Rated to 200 degrees Fahrenheit and 200 PSI
- Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
- Low-lead DZR corrosion-resistant brass body
- PVC end of fitting (white-collar end) can be removed with PVC disconnect clip (UIP710, UIP712, UIP714)
- Code approved, IAPMO listed, for details see Specifications
- 25-Year warranty when used with PVC to PEX, copper, CPVC & PE-RT pipe
- 5-Year Warranty when used with SDR-9 HDPE pipe
The 1 in. x 1 in. x 3/4 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 65
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
