Test Caps & Plugs
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- Won’t fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Test cap
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- Won’t fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Made of plastic
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- Won’t fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Test-Tite
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- Won’t fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Test-Tite
Dallas Specialty 2" Dal-Cap is a clean out or test cap. The Dal-Cap is easy to install. Can be used as a permanent or temporary cap.
- Flexible
- Permanent
- temporary
- Reusable
- Clean-Out Cap
- Testing Cap
Dallas Specialty Dal-Caps clean out or test caps are easy to install. They are durable and reusable. They can be a temporary or permanent Clean-Out cap.
- Clean-Out cap
- Test cap
- temporary cap
- permanent cap
- stainless steel hose clamp
- Flexible cap
3 in. cost effective plug. Used for plugging open ended pipe. Includes rubber sealing ring.
- Oversized wing nut with wrench pad for easy removal
- Made of high impact ABS material
- Will not rust or corrode
- Sold by the case
- 3 in.
- ABS
Dallas Specialty 3" clean out or test cap is easy to install. The Dal-Cap can be temporary or permanent. The Dal-Cap is Flexible to fit many different type of pipe.
- Flexible
- Permanent
- Temporary
- reusable
- Clean-Out cap
- Testing cap
DALLAS SPECIALTY 4 in. clean out or test cap is easy to install. The Dal-Cap can be temporary or permanent. The Dal-Cap is flexible to fit many different types of pipe.
- Flexible
- Permanent
- Temporary
- Reusable
- Clean-out cap
- Testing cap
4 in. cost effective plug. Used for plugging open ended pipe. Includes rubber sealing ring.
- Oversized wing nut with wrench pad for easy removal
- Made of high impact ABS material
- Will not rust or corrode
- Sold by the case
- 4 in.
- ABS
Twist-Tite Mechanical Test Plug. Oversized Wingnut with Wrench Pad for Easy Removal, Made of High Impact ABS Material. Will not rust or Corrode, Neoprene Gasket.
- Mechanical test plug
- Oversized wingnut with wrench pad for easy removal
- Made of high impact abs material
- Will not rust or corrode, neoprene gasket
- Test-Tite
- Very durable
2 in. cost effective wing nut test plug. Used for plugging open ended pipe. Includes rubber sealing ring.
- Oversized wing nut with wrench pad for easy removal
- Made of high impact ABS material
- Will not rust or corrode
- Sold by the case
- Durable
- ABS
1-1/2 in. HIPS. Cap Test Insert.
- Plastic
- Size with 1-1/2 in.
- Knock-out plug
- Round
- White
- Test cap
Test-Tite Kap-On Combination Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. Choose from two models: one fits 1-1/2- and 2-inch piping, while the other fits 3- and 4-inch piping. These moderate-pressure test caps can be solvent-welded on either PVC or ABS pipes and are higher rated than plug-on test caps. Once installed, the caps can effectively test systems with up to 30 feet of water or 12 psig.
- Moderate-pressure test cap for DWV (drain, waste, and vent) piping
- Available in two sizes (one fits 1-1/2- and 2-inch piping, while the other fits 3- and 4-inch piping)
- Higher rated than plug-on test caps
- Can be solvent-welded to both PVC and ABS pipes
- Tests up to 30 feet of water or 12 psig
- Test Cap
- Solvent weld
4 in. T-Cone Combination Cleanout Plugs are economical, rust-proof and reusable. Positive sealing design. Tests up to 50 ft. of head pressure.
- Rust-proof and reusable
- Tests 4 in. Sch. 40 and copper DWV, PVC SW, cast iron and VCP barrel; 3 in. cast iron hub
- 1-year limited warranty
- Sold by the case
- Durable
- Corrosion resistant
2 in. T-Cone Combination Cleanout Plugs are economical, rust-proof and reusable. Positive sealing design. Tests up to 50 ft. of head pressure.
- Rust-proof and reusable
- Tests 2 in. Sch. 40 DWV and type M copper tub
- 1-year limited warranty
- Sold by the case
- Durable
- Corrosion resistant
1-1/2 in. T-Cone Combination Cleanout Plugs are economical, rust-proof and reusable. Positive sealing design. Tests up to 50 ft. of head pressure.
- Rust-proof and reusable
- Tests 1-1/2 in. Sch. 40 DWV
- 1-year limited warranty
- Sold by the case
- Durable
- Corrosion resistant
Cleanout Test Plug for General use, 3 in. For Pressure Testing Plumbing Systems and General Plugging Applications, eliminates test water back splash. Can Be Used with Any Type Of Pipe.
- Designed for the testing of plumbing pipelines above the cleanout tee
- Design of this plug will allow for passing of the test water or air by deflating the plug
- After deflation, the plug can be unscrewed from the test tee
- Manufactured from a durable natural rubber compound
- Durable
- Cleanout test plug
HIPS Material. Size: 4 in. Knock-out Plug. Round.
- Hips material
- Size:4 in.
- Knock-out plug
- Round
- Closet flange
- DWV
3 in. T-Cone Combination Cleanout Plugs are economical, rust-proof and reusable. Positive sealing design. Tests up to 50 ft. of head pressure.
- Rust-proof and reusable
- Tests 3 in. Sch. 40 and copper DWV; 2 in. cast iron hub
- 1-year limited warranty
- Sold by the case
- Durable
- Corrosion resistant
Cleanout Test Plug for General use, 2 in. For Pressure Testing Plumbing Systems and General Plugging Applications, eliminates test water back splash. Can Be Used with Any Type Of Pipe.
- Designed for the testing of plumbing pipelines above the cleanout tee
- Design of this plug will allow for passing of the test water or air by deflating the plug
- After deflation, the plug can be unscrewed from the test tee
- Manufactured from a durable natural rubber compound
- Test-Tite
- Very durable
2 in. Standard Pneumatic Test Plug is designed for the testing of pipelines or to temporarily stop the flow. Can be used in a variety of fitting applications and are suitable for most pipe materials. Conforms to irregular pipe shapes to seal effectively.
- Manufactured from a durable natural rubber
- Suitable for most pipe materials
- Metal cap/core tool is also included
- Sold by the case
- Durable
- 2 in.
Low pressure test cap. For 1-1/2 in. DWV Pipe. Can be solvent welded onto PVC or ABS pipe. Can be tested up to 10 ft. of water or 4.3 psig.
- Plastic construction
- 100 per pack
- Tests 1-1/2 in. pipe
- Sold by the case
- Testing cap
- Removable
Low pressure test cap. For 2 in. DWV Pipe. Can be solvent welded onto PVC or ABS pipe. Can be tested up to 10 ft. of water or 4.3 psig.
- Plastic construction
- 50 per pack
- Tests 2 in. pipe
- Sold by the case
- Durable
- Plastic