Pipe, Tubing & Fittings
This pipe is made of durable, corrosion-resistant CPVC material. Used for potable hot and cold water distribution. Solvent weld design makes it easy for DIY plumbing projects and installation.
- Meets ASTM D2846
- NSF listed
- Copper tube size
- Rated for 400 psi at 73 degree F
- Rated for 100 psi at 180
- CPVC systems are accepted by all major model building codes
The 1/2 in. SharkBite Push-Fit x FNPT Adapter allows you to make a connection to 1/2 in. pipe using a push-fit connection and then gives you a 1/2 in. Female NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200 degree F and 200 psi
- Meets all UPC, IPC and cUPC requirements
Streamline Copper Solder-Joint Fittings for supply/pressurized systems have been the leading brand of copper fittings for over 80 years. Available in both wrot copper and cast bronze, our product selection has grown to become the most extensive in the industry. We are the acknowledged experts at engineering and manufacturing precision solder-joint copper fittings. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- Built for installation into pressurized plumbing systems
- Solder connections provide strong and long-lasting connections
- For use in above-ground potable water supply systems
- Constructed of high-grade copper in compliance with UNS C12200
- Conform to the NSF/ANSI 61 Annex G
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- 700 psi maximum pressure rating
The NIBCO 90 degree elbow features a solder cup, male solder end, and a close rough radius. The fitting provides a means of changing the pipeline direction 90 degree . They are used when velocity is not a problem. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
- Dezincification resistant
- ASTM B75 alloy C12200
- Third-party certified to NSF/ANSI 61 and 372
- Material and workmanship per ASME B16.22
- Material, workmanship and dimensions per MSS SP-104
- NFPA 99 health care facilities gas and vacuum systems and the compressed gas association, pamphlet G4.1 (medical gas)
- Lead free
Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- Designed to join ASTM B88 and ASTM B280 seamless copper tube
- For use in above-ground potable water supply systems
- Constructed of high-grade copper in compliance with UNS C12200
- Conform to the NSF/ANSI 61 Annex G
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- 700 psi maximum pressure rating
Southland offers both black and galvanized welded steel nipples in 15 diameters from 1/8 in. to 6 in. and with different lengths ranging from Close up to 12 in. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18 up to 72. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.
- ANSI/ASME B.16.3, B-16.14, B16-39 and Threads: ANSI B1.20.1
- Steel nipples/Pre-Cut Pipe meet material: ANSI/ASTM A.733.A5320; Threads: ANSI B1.20.1
- Galvanized Steel Nipple can be used in residential drainage and potable water applications. The nipple can be used to repair pipe or make an extension from a fitting or existing pipe.
- Nipple complies with NSF 372 lead free
- Long useful life
- Easy to install, ready to use
The 1 in. female sweat x 1 in. barb copper adapter fitting offers contractors labor savings and flexibility, ideal for commercial or residential projects. Designed to fit inside a wrought copper fitting and with PEX systems, the innovative construction eliminates the need for soldering, heating, or specialty tools. The lead-free cooper material delivers dependability for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Crimp installation eliminates the need for soldering, heating, or specialty tools
- Copper construction holds up to years of use and ensures sanitation
- Pressure ratings of up to 80 psi at 200°F handles the high demand of commercial usage
- NSF 61 certified
- 25-year warranty proven to last the lifetime of the building
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty.
- Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC international fuel gas code
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA 30 flammable and combustible liquids code
- NFPA 30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certifiefd to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
- ASTM F1960 3/4" X 3/4" elbow
- Full flow
The NIBCO PressG copper fitting reducer features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The fitting reducer has a press connection and a fitting end. The fitting provides a method to connect two lengths of tube. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing,
- Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC international fuel gas code
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA 30 flammable and combustible liquids code
- NFPA 30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certifiefd to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
The NIBCO PressG copper fitting reducer features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The fitting reducer has a press connection and a fitting end. The fitting provides a method to connect two lengths of tube. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing,
- Operating pressure 200 psi maximum, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC (international fuel gas code)
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA30 flammable and combustible liquids code
- NFPA30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certified to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- For use in above-ground potable water supply systems
- UL recognized to 700 psi
- Constructed of high-grade copper or bronze materials
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- Wrot fittings meet NSF 61G
- Specified brand of industry professionals
Southland offers both black and galvanized welded steel nipples in 15 diameters from 1/8 to 6 and with different lengths ranging from Close up to 12. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18 up to 72. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements.
- Steel nipples meet material: ANSI/ASTM A.733.A5320; Threads: ANSI B1.20.1
- Used to repair pipe or make an extension from a fitting or existing pipe
- Nipple complies with NSF 372 lead free
- Long useful life
- Easy to install, ready to use
- Install according to your local code
This brass compression coupling features a solid brass construction. It use with copper tubing. All of its features comply with state lead-free requirements.
- Made of cast brass
- 5 in. in length
- Lead free
- Easy to connect
- Fittings
- Join by threading
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty.
- Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC international fuel gas code
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA 30 flammable and combustible liquids code
- NFPA 30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certifiefd to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
The NIBCO PVC DWV male adapter is used in residential and commercial drain, waste and vent systems. The PVC DWV male adapter features a hub x male NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- For above-ground DWV
- Adapts PVC pipe to standard female pipe threads using solvent
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
Streamline Copper Solder-Joint Fittings for supply/pressurized systems have been the leading brand of copper fittings for over 80-years. Available in both wrot copper and cast bronze, our product selection has grown to become the most extensive in the industry. We are the acknowledged experts at engineering and manufacturing precision solder-joint copper fittings. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- Designed to join ASTM B88 and ASTM B280 seamless copper tube
- For use in above-ground potable water supply systems
- Constructed of high-grade copper in compliance with UNS C12200
- Conform to the NSF/ANSI 61 Annex G
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- 700 psi maximum pressure rating
Streamline Copper Fittings have been the leading brand of copper fittings for over 80-years. Our product selection has grown to become the most extensive in the industry. Quality, consistency and reliability have made the Streamline brand trusted and specified all around the world.
- For use in above-ground potable water supply systems
- UL recognized to 700 psi
- Constructed of high-grade copper or bronze materials
- Made to applicable ASME standards B16.15, B16.18, B16.22, B16.24, B16.50, B1.20.1
- Wrot fittings meet NSF 61G
- Specified brand of industry professionals
NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty.
- Operating pressure 200 psi maximum, (125 psi for natural gas applications) depending on the application
- Temperature range -40°F to 180°F
- ASTM B75 alloy C12200 copper
- IFGC (international fuel gas code)
- NFPA 54/Z223.1 national fuel gas code
- NFPA 58 liquified petroleum gas code
- UPC chapter 12 fuel piping
- NFPA30 flammable and combustible liquids code
- NFPA30A code for motor fuel dispensing facilities and repair garages
- NFPA 31 standard for the installation of oil burning equipment (supply line only)
- Third party certified to ANSI LC4/CSA 6.32
- Third party certified to IAPMO/UPC LCL-4
- ICC-ES PMG 1036
This braided vinyl tubing is made from polyester braided reinforced polyvinyl chloride and has the strength to withstand 4-times the working pressure of single wall PVC. The smooth, dense bore of the tubing maximizes the flow rate and reduces sediment buildup. It has excellent resistance to acids, alkalis and many solvents and handles a wide variety of chemicals, gases and liquids.
- Easy to use
- Made with polyester braided reinforced PVC non-toxic material
- Excellent resistance to acids, alkalis and many solvents
- Handles a wide variety of chemicals, gases and liquids
- Provides superior performance under severe operating conditions
- Excellent for hydraulic, pneumatic and vacuum lines
This copper adapter allows Sioux Chief the option of offering naturally no-lead and dezincification resistant fittings. Do not bury copper fittings or connections directly in soil. Proper wraps must be used when fittings are buried in soil.
- 1-piece solid copper
- No lead
- 3/4 in. F1807 x 1/2 in. female sweat
- Economical
- Certified by CSA
- Historically proved
Complete the installation of your DWV system with the NIBCO 4 in. PVC DWV 60 Hub x Hub Elbow. The fitting changes the direction of PVC piping 60 s. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- Changes the direction of PVC piping 60 degree
- Solvent weld connections
- Apply a primer to the PVC before cementing
The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The PVC DWV 45 degree double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC construction
- Use for non-pressurized sanitary system drain, waste and vent
- Helps remove wastewater and water-borne wastes from your plumbing fixtures and appliances (fixtures and appliances sold separately)
- Helps provide air circulation within your drainage piping (sold separately)
- Brings 3 PVC DWV branch lines into a horizontal drain pipe (lines and pipes sold separately)
- Compatible with PVC pipes (sold separately)
- Solvent-welded connections
- Requires a primer before cementing (primer not included)
- 5 psi maximum working pressure
The 3/4 in. barb x 1/2 in. barb x 3/4 in. barb brass tee fitting offers contractors labor savings and installation flexibility, ideal for hospital or residential projects. The crimp insert fitting doesn't require soldering, heating or specialty tools. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. Operates at a whisper noise level. High-temp and freeze-resistant materials perfect for hot and cold water applications for PEX systems.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Crimp installation eliminates the need for soldering, heating or specialty tools
- Lead-free, eco-brass construction holds up to years of use and ensures sanitation
- T-shape allows for multi-directional flow of potable water from a single indoor main line
- Pressure ratings of up to 80 psi at 200 degree F handles the high demand of commercial usage
- 360 degree uniform pressure delivers more flow than required by fixture demand
- NSF 61 certified
- 25-year warranty proven to last the lifetime of the building