Ball Valves
This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.
- Forged brass body
- Full port
- Quarter-turn operation
- Lead free design is suitable for all potable water supply installations
- Suitable for non-shock operating pressures up to 600 psi
- Threaded end connections conform to ANSI/ASME B1.20.1
- ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
- Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
Designed for residential/commercial air, steam, oil or gas applications, this 3/4 in. Lead Free Brass Sweat x Sweat Ball Valve includes a full port for maximum flow and minimum pressure drops. Each valve has a full forged brass body that provides excellent corrosion resistance.
- Forged brass body
- Full port
- Quarter-turn operation
- Lead free design is suitable for all potable water supply installations
- Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
- Made in Italy
The 3/4 in. SharkBite Push-to-Connect Ball Valve is the easiest way to install a new or replacement shut-off ball valve. The single lever control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. SharkBite fittings allow you to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless-steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200°F and 200 psi
- 3/4 in. Pipe Insertion Depth = 1-1/8 in.
The ApolloPEX 3/4 in. Brass PEX Barb Ball Valve is simple to install and provides flow control through an anti-stick and smooth operating quarter turn lever handle. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Most economical piping system available
- Quarter-turn lever handle design for simple flow control
- Compatible with PEX pipe
- Meets UPC, IPC and cUPC standard
- Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
- NSF listed
- Barb x barb connection for PEX plumbing systems
- Rated to 200°F and 200 psi
The 1/2 in. SharkBite Push-to-Connect Ball Valve is the easiest way to install a new or replacement shut-off ball valve. The single lever control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. SharkBite fittings allow you to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200°F and 200 psi
- 1/2 in. pipe insertion depth 15/16 in.
The Homewerks Worldwide 3/4 in. CPVC Slip x Slip Ball Valve is designed for use with hot and cold water. The Ball Valve features CPVC construction and is compatible with CPVC tubing-sized pipes (pipes not included). The valve has a maximum working pressure of 100 psi at 180°F and is not meant for use with compressed air.
- CPVC construction
- Compatible with CPVC pipes (sold separately)
- 125 psi maximum pressure
- Working temperature from 40°F to 150°F
- Suitable for all potable water supply installations
- Beige color
This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.
- Forged brass body
- Full port
- Quarter-turn operation
- Lead free design is suitable for all potable water supply installations
- Use of pipe thread sealant or thread tape is recommended for installation
- Threaded end connections conform to ANSI/ASME B1.20.1
- ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
- Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
WARNING FOR CALIFORNIA RESIDENTS: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. www.p65warnings.ca.gov Brass ball valve 2-piece Full port Press X Press ends 200 PSIG @ 250°.
- Two Piece Full Port Brass Ball Valve
- Press x Press Ends
- 200 psig Non-Shock @ 250 Degrees F
- Blow-out Proof Stem
- For Potable Water Service
- Certified NSF/ANSI 61 and NSF/ANSI 372
The 3/4 in. barb x 3/4 in. barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold-water applications for PEX systems.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- Versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
- Cooper construction holds up to years of use and ensures sanitation
- Pressure ratings of up to 80 PSI at 200°F handles the high demand of commercial usage
- NSF 61 certified
- 25-year warranty proven to last the lifetime of the building
- Bag of 10
Perfect for residential or commercial use on water, air, steam, oil or gas, the Everbilt Lead Free Ball Valve is designed to fit for a variety of applications. It is constructed of heavy-duty, corrosion-resistant forged brass and features a lever handle and copper sweat connections on either end. The full port design provides maximum flow and minimum pressure drops.
- Forged brass body
- Full port
- Quarter-turn operation
- Complies with 0.25% weighted average lead content on wetted surfaces
- Lead free design is suitable for all potable water supply installations
- During installation, only apply heat to valve while in the open position
- Can be soldered onto Type K, L or M rigid copper pipe
- Suitable for non-shock operating pressures up to 600 psi
- Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
The 3/4 in. Tectite by Apollo Push-To-Connect ball valve is the fastest, cleanest and simplest way to install or replace a ball valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. The quarter turn, single lever control allows for simple control of water flow in hydronic and potable water systems. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Quarter turn lever handle for simple flow control
- Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 60
- Demount clip allows for valve removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250°F
The 1/2-inch barb x 1/2-inch barb brass fitting provides contractors with speedy installation and cost savings that is perfect for commercial or residential applications. The versatile construction can be uses to either isolate a fixture or main line for easy maintenance and repairs. The lead-free eco-brass construction delivers dependability and peace of mind for building owners. High-temp and freeze-resistant materials allows for adaptation to hot and cold water applications for PEX systems.
- High-temp and freeze-resistant materials adapt to both hot and cold water applications for PEX systems
- This versatile brass valve can be used to either isolate a fixture or main line for easy maintenance and repairs
- Cooper construction holds up to years of use and ensures sanitation
- Pressure ratings of up to 80 PSI at 200 degrees Fahrenheit handles the high demand of commercial usage
- NSF 61 certified
- 25-year warranty proven to last the lifetime of the building
This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.
- Lead free design is suitable for all potable water supply installations
- Quarter-turn operation
- Features a full port brass ball that maximizes flow and minimizes pressure drop
- Lead free forged brass body
- Use of pipe thread sealant or thread tape is recommended for installation
- ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
- ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
- Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
The Homewerks Worldwide CPVC Solvent-Weld Ball Valve can be used for various applications such as: water supply, building, housing, factory and marine equipment, water and waste treatment, chemical plants, agriculture, irrigation and multiple industrial uses. Severe shock, loads and stress are absorbed by the valve body, not the ball and seat, minimizing the chance of uneven wear and leakage. Excellent flow characteristics. Seats: PTFE. Seals: EPDM. Suitable for hot water systems.
- CPVC construction
- Compatible with CPVC pipes (sold separately)
- 125 psi maximum pressure
- Working temperature from 40°F to 150°F
- Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
- 1-year warranty
The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90°) open to close. The 2-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.
- Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4 in. to 2 in.)
- Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 4 in.)
- Full port
- Blowout-proof stem
- Threaded end connections
- Standard lever handle
- IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
- CSA ANSI Z21.15/CSA 9.1 (1/4 in. to 4 in.)
- "3/4 I.D. and 0.875 O.D."
- CSA ASME B16.33: 125 psi (maximum) (1/4 in. to 4 in.)
- CSA CAN/CGA 3.16 (1/4 in. to 4 in. )
- CSA CGA CR91-002: 1/2 psi, 2 psi, and 5 psi (1/4 in. to 4 in.)
- FM 1140 approved 175 WWP (1/4 in. to 2 in.)
- UL 1477 (YQNZ): compressed gas shutoff valves - 250 psi (1/4 in. to 4 in.)
- UL 842 (YRBX): flammable liquid shutoff valves - 250 psi (1/4 in. to 4 in.)
- UL 842 (YRPV): gas shutoff valves - 250 psi (1/4 in. to 4 in.)
- UL 842 (MHKZ): manual valves - 250 psi (1/4 in. to 4 in.)
- UL 125 (YSDT): LP-gas shutoff valves - 250 psi (1/4 in. to 4 in.)
The 1/2 in. Tectite by Apollo Push-To-Connect ball valve is the fastest, cleanest and simplest way to install or replace a ball valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. The quarter turn, single lever control allows for simple control of water flow in hydronic and potable water systems. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Quarter turn lever handle for simple flow control
- Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 59
- Demount clip allows for valve removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250°F
WARNING FOR CALIFORNIA RESIDENTS: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm https://www.p65warnings.ca.gov Brass ball valve 2-piece Full port Press X Press ends 200 PSIG @ 250°.
- Two Piece Full Port Brass Ball Valve
- Press x Press Ends
- 200 psig Non-Shock @ 250 Degrees F
- Blow-Out Proof Stem
- For Potable Water Service
- Certified NSF/ANSI 61 and NSF/ANSI 372
The ApolloPEX 1/2 in. Brass PEX Barb Ball Valve is simple to install and provides flow control through an anti-stick and smooth operating quarter turn lever handle. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Most economical piping system available
- Quarter-turn lever handle design for simple flow control
- Compatible with PEX pipe
- Meets UPC, IPC and cUPC standard
- Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
- NSF listed
- Barb x barb connection for PEX plumbing systems
- Rated to 200°F and 200 psi
This lead free ball valve is forged from bass and includes a lever handle with compression connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve comes fitted with Polytetrafluoroethylene enforced seats and seals to reduce the risk of valve leakage is also corrosion resistant.
- Forged brass construction
- Lead free design is suitable for all potable water supply installations
- Compression ends for solder less connection to copper tubing
- Easy quarter-turn operation
- Vibration-proof handle nut
- Corrosion resistant
The Everbilt Lead Free in line ball valve is made of brass and has a lever handle with Compression connections on both ends for quick DIY installation. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications. The valve is fitted with Polytetrafluoroethylene (PTFE) reinforced seats and seals reduce the risk of valve leakage. Low Operation Torque Heavy duty handles with blue vinyl insulation.
- Lead free design is suitable for all potable water supply installations
- Forged brass construction
- Compatible with copper pipes (sold separately)
- Quarter turn
- Vibration-proof handle nut
- Corrosion resistant