Pumps & Well Accessories
Would you like to know if water gets too high in your sump or sewage pit? Is it code in your area to have a high water alarm on your sump or sewage pit? If so, the PS-WS is an accessory for The Pro Series Deluxe Float Controller (DFC2, VSC2, TSC2) that will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor (allowing for text, email and in app notifications using the PS-WiFi). It simply attaches to the discharge pipe with included mounting hardware and the 10 foot cord plugs in at the bottom of the Deluxe controller. Between the visual light, audible alarm and optional text or email notifications (when using the PS-WiFi) you can be In the know when you are on the go.
- Will activate a warning light, an audible alarm, send a signal to the remote terminal, and send information through the USB port when water reaches the sensor
- For use with the pro series deluxe float controller (DFC2, VSC2, TSC2) or pro series water alarm (PWA2)
- Easily attaches to the discharge pipe with included mounting hardware
- 10 ft. cord with plug
The Zoeller Tri-Check is a combination PVC check valve and ball valve for use with 2 in. discharge piping. It has a Glue x Glue Union Connection for easy installation. It has a full flow design for maximum performance.
- Full flow design
- Glue x Glue union connection
- Vertical or horizontal installation
- Includes ball valve for code requirements
This submersible pump is used for dewatering also known as sump or effluent. M53 has the ability to be used in septic tank systems. The pump has a 1 ½ NPT discharge and passes solids measuring up to ½ inch. This .3hp pump was designed for residential/light commercial use.
- Float operated
- Corrosion-resistant, powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Solid buoyant polypropylene float
- Entire unit pressure tested after assembly
- Carbon and ceramic shaft seal
The adjust-angle thermometer model AS5 has a black Aluminum case with glass front to exclude dirt and dust. Connection comes standard with a swivel nut 1-1/4 in. - 18 in. NEF thread. This item also comes with a brass thermowell that has a 3/4 NPT connection. The steam length is 3-1/2 in. and the temperature range is 0/160 degree F.
- Simple adjustment just 2 screws permit case to be rotated 180 degree and stem to be positioned in 10 degree increments allowing user to select the most desirable viewing position
- Easy readability lens front blue liquid filled thermometer tube is mounted on V-shaped aluminum scale with bold black lines and numerals
- Accurate calibrated against standards traceable to the national institute of standards and technology and guaranteed accurate to plus or minus 1 scale division
- Construction black molded ABS case with glass front to exclude dirt and dust is standard, aluminum case is optional at additional charge, plastic face is optional at additional charge, ABS case should not be subjected to temperatures greater than 200 degree F
Rugged cast iron pump body and motor cover, exterior hardware stainless steel construction. 115-Volt oil filled motor with automatic reset overload provides safe operation. 10 ft. power cord. Vertical automatic switch. 1-1/2 in. discharge. 32 ft. shut-off. 62 GPM discharge.
- Piggyback-style float for automatic or manual operation
- Oil-filled motor with automatic reset overload provides safe operation
- Ball-bearing construction for long life
- Easily replaceable power cord with optional lengths available
- Tank connection: 1" MPT
- In-line connection: 1" MPT x 3/4" FPT
- Centre end length: 10"
- Drain/relief ports: (2) 1/2"
- Accessory ports: (2) 1/4"
- Lead free
Utility gauge for commercial and industrial markets. Black steel case, chrome bezel, copper alloy internals. This gauge has a 3 1/2 dial, 1/4 npt connection, 100 psi/bar scale.
- 3 1/2 dial, 1/4 npt connection
- 100 psi/bar scale with no logo
- Accuracy 3-2-3% of span, ASME B40.1 Grade B
- Black steel case, chrome bezel, copper alloy internals
For 4 in. inside diameter or larger will casings. Pumps up to 150 ft.. Patented floating stack design for sand resistance and reduced sand locking. Corrosion-resistant stainless steel pump and motor housing. Heavy-duty discharge connection. Precision-molded impellers and diffusers. Includes built-in check valve. Water filled submersible motor. 230-Volt, 1/2 HP, 2-wire motor does not need a control box.
- 10 GPM rated model for maximum efficiency in most homes
- 1-1/4 in. corrosion-resistant thermoplastic discharge head outlives conventional metals even in the harshest environments
- High-efficiency motor for fewer energy dollars
- NEMA-standard motor
- Built with a green ground wire per national electric code specifications for ground protection
- Start and run capacitors are built into the motor so there is no need for a control box
Featuring an appliance-like finish for a long life, the Flotec 19-Gallon Pre-Charged Pressure Tank with 42-Gallon Equivalent Rating is pre-charged to 40 psi. The tank features heavy-gauge steel construction, and the metal parts of this durable tank do not touch water. Conveniently sized, this tank is ideal for lawn sprinkling and has an air/water separator that can be replaced.
- 19-gallon capacity vertical tank is ideal for lawn sprinkling
- Water does not touch metal components
- Replaceable air/water separator for easy maintenance
- Convenient size is perfect for cabins and summer homes
- Tough, appliance-like finish for a long life
- Heavy-gauge steel construction for durability
- 1 in. NPT female plumbing connection
- Factory pre-charged to 40 psi
- 1 in. NPT female plumbing connection
This Professional Grade DUAL SUCTION Stainless Steel 1/3 HP RIDGID Pump is assembled in the USA and tested to 1 Million Cycles for performance that lasts. The 330RSDS will deliver dependable, energy-efficient, ultra-quiet performance for years to come - warrantied for 5 years. Able to pump up to 4,320 GPH. It is The Hardest Working Pump You'll Never Hear!
- Easy to install, start-to-finish in about 15 minutes
- Stainless steel housing construction with cast iron base for extended pump life
- High performance, energy efficient motor runs virtually silent
- Float guard protects float and switch for dependable operation
- Dual suction design removes debris and resists air lock
- Passes up to 1/2 in. solids
- 1-1/2 in. national pipe thread discharge complies to building codes
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
The Everbilt 1/2 HP Cast Iron Effluent Pump is constructed of heavy-duty cast iron and features a PSC motor for energy efficiency. The pump is engineered to pass 3/4 in. solids. The HDEFR50W will pump up to 3180 GPH at 10 ft.
- Tethered float switch automatically starts and stops the pump
- PSC motor ensures energy efficiency
- Heavy-duty cast iron construction for heat dissipation and durability
- Piggyback float switch allows for automatic or manual operation
- Built-in thermal overload protection
- 18 Minimum Basin Diameter required when installed in a sewage basin application
Universal Discharge Hose Kit Contains 24 ft. of 1-1/4 in. Corrugated Tubing. One 1-1/4 in. and One 1-1/2 in. high-impact NPT barbed adapters. for use with pedestal and submersible sump pumps.
- 1-1/4 in. x 24 ft. discharge hose kit
- For use with pedestal and submersible sump pumps
- Ready to install for permanent or emergency use
- Hose clamps included
To be use mainly to piston pumps or jet pumps in combination with galvanized tanks. Ensures proper water pressure. Prolongs pump life by reducing cycling frequency.
- Easy to install
- 2 years warranty against defect
- 42 Gal.
- Non-repairable
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
Pre-charged pressure tanks require 50% less space than standard conventional tanks, while providing greater water capacity between pump cycles for maximum system life. Tough appliance-like finish for extended life. Water never touches metal components, replaceable air/water separator for easy maintenance. Convenient air valve location for quick air pressure check.
- 85 Gal. pressure tank is factory pre-charged to 40 psi for efficiency
- Heavy-Gauge steel construction for maximum durability and extended life
- Precision press fit design minimizes gaps between components, reducing corrosion and seam leaks
- Large capacity ideal for high demand water usage
- NSF-61 approved tank with replaceable air/water separator
Holds prime for jet well pumps and irrigation pumps. Heavy perforated solid brass strainer. Features include perforated steel screen strainer, poppet with Buna-N O-ring, stem guide and wide channel for maximum flow.
- Spring loaded
- 2 years warranty against defect
- Used with jet pumps
- Female NPT threads
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
- Maintenance free - no need to add battery fluid or distilled water
- Compatible with all new PHCC Pro Series backup products
- Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
- Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Runs pump intermittently for days
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
- Warning:Â Do not use this product with water systems that convey or dispense water for human consumption
- Heavy perforated solid brass strainer
- Used with jet pumps
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quaility
- Reliability
- Durability
- Easy to install
3/4 HP Permanent split capacitor motor (PSC). Tethered float switch. Sand Guard sealed components for ultimate durability. Double lip seal provides the ultimate wear protection for continuous operation. Handles up to 3/16 in. solids. 12 Amps max load. Float switch on: 13.5 in., off: 6.75 in.
- UL and CSA listed.
- Vortex design impeller handles up to 3/16 in. solids
- Ultimate dependability with sand guard sealed components
- High-efficiency motor has lower operating costs
- Double-lip seal for ultimate wear protection for continuous operation
ZOELLER M267, 1/2 HP SUBMERSIBLE SEWAGE, EFFLUENT, DEWATERING PUMP. AUTOMATIC SWITCH, 115V, W/ 10FT CORD