Commercial & Specialty Sinks

Item is a 2 in. Floor Interceptor. PVC Screen, Sediment Bucket, Cover, Latches and Hardware. Floor Interceptor, Solids, 2 in. Pipe Diameter, Overall Diameter: 8-7/16 in., 12-1/2 in. H, Lid 7-1/2 in., Material of Construction Zinc, Pac, Steel, Color/Finish Mill, Connection Threaded, Includes PVC Screen, Sediment Bucket, Cover, Latches and Hardware.

• PVC screen
• Sediment bucket included
• Cover and latches included
• Hardware included
• 2 in. pipe diameter
• Diameter: 8-7/16 in.
• 12-1/2 in. H
• Lid: 7-1/2 in.
• Material of construction zinc, PVC, steel
• Color/finish: mill

Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides connections to 3/4 in. hoses for both fresh water and waste. The back of this unit is exposed, providing access for the hoses and connections. A Mini Tank Water Heater is supplied to provide tempered water. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose through an electric water heater, with thermostatic mixing valve, to provide tempered water
• Wastewater is collected in a removable wastewater tank
• Handle faucet for manual activation

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Handle faucet for manual activation
• Faucet has gooseneck spout

These sinks are provide hand washing capabilities in areas not normally equipped for it-inside or out. Fresh water is supplied and waste water via onboard tanks. It is operated by foot pump through a gooseneck faucet only.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Plastic tanks for fresh water
• Plastic tanks for waste water
• Foot-pump models can go completely off-grid, manually pumping water to the faucet
• Simple gooseneck spout (used for foot-pump model only)

This Undermount Group single compartment 18 in. x 24 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This 6.5 Gal. fresh-water tank is designed as an accessory to the EPS1000 series sinks. It provides fresh water source for the portable sink. This HDPE plastic tank is not imported.

• Fresh-water tank is designed as an accessory to the EPS1000 series sinks
• Tank provides fresh water source for the portable sink
• Made of FDA approved high density polyethylene (HDPS) plastic
• Durable, rust and dent-proof
• 6.5 Gal. (24 l) capacity
• Dimensions: 14-1/2 in. L x 8-1/2 in. W x 18-1/2 in. H
• Not UN rated
• Convenient back and top handles for easier pouring
• Spout is self-venting
• Tank can be recycled

54 in. Bradstone Circular Classic Washfountain. Heavy duty Bradstone material offers low maintenance and high vandal resistance. Foot control water control. Can accommodate up to 6 users at a time. Operates at water pressure ranges of 20-80 psi.

• 54 in. circular design
• Foot control water activation
• Vandal resistant
• 1.25 Gal. per minute flow rate
• Deep well for heavy duty handwashing
• Pre-assembled bowl and pedestal for ease of installation
• 1-water connection and 1-drain connection

Bradley 36 in. Stainless Steel Semi-Circular Washfountain features hands free activation with a food pedal. The bowl is a one piece pressing of 14-Gauge Stainless Steel. The 9 in. bowl allows complete hand and arm washing and can accommodate up to 3 users.

• 36 in. semi-circular bowl design
• Stainless steel construction for vandal resistance
• 9 in. deep bowl
• Reliable foot control activation
• 1-water connection/1-waste connection
• Pedestal is constructed of 14-Gauge steel and 16-Gauge galvanized steel upper braces

This Undermount Group single compartment 18 in. x 21 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

Deluxe Stainless Portable Sinks are designed to provide hand washing capabilities in areas not normally equipped for it. Portable Wash-Ware units can be set up anywhere--inside or out. This model is supplied by an onboard 5 Gal. freshwater tank and operates via on-demand electric pump. The waste is collected in an onboard 6 Gal. tank. The single handle gooseneck faucet is sensor operated with battery and has a 0.5 GPM flow control.

• Swivel casters for smooth transit, roll it where you need it
• Integrated attachment points for paper towel holder, trash can accessories and soap holders
• Integrated ball-valve for easy shutoff when draining waste tank (not available on pump models)
• Hose models provide convenient hand-washing anywhere a hose can reach
• Plug-in electric pump model delivers water from a tank under cabinet if hose is out of reach
• Touchless sensor faucet reduces the spread of bacteria

This Undermount Group double compartment 18 in. x 32 in. undermount sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Drain punch J-35 drain
• Conforms to ASME/ANSI A112.19.3M

This Undermount Group ADA compliant single compartment 18 in. x 30 in. undermount sink from Just Manufacturing. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces polished to a non-porous Hand Blended Just Finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Polished with a satin blended number 4 finish, with highlighted bowl rim
• Conforms to ASME/ANSI A112.19.3M

This Stylist Group single bowl 18 in. x 15 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304-stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300-series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This Stylist Group single bowl 16 in. x 17 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This Stylist Group single deep bowl 22" x 17" drop-in sink with rear ledge, from Just Manufacturing, is 100% Made in USA. It is a seamless die-drawn construction of 18 gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4" radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304-stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Polished with a satin blended number 4-finish with highlighted bowl rim
• Fully coated underside
• Grip-rim plus self-rimming 300-series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

Murdock model GWJ85 series is a round pedestal mounted Hand Wash. It is barrier free and vandal resistant. It is made from 16-Gauge, type 304 stainless steel bowl mounted into a 12-Gauge, heavy-duty stainless steel support arm. The finish is a green powder coated. Unit shall be activated by a 9-Volt DC Hands Free Sensor Faucet. The faucet has a 0.5 GPM Laminar flow outlet to minimize splashing. This model complies with ANSI A117.1, Public Law 111-380 (NO LEAD), CHSC 116875; Fixture meets ADA requirements.

• ADA compliant (when properly installed)
• Resistant to sunlight, heat, moisture and wear
• Hands free sensor hand washing faucet
• Stainless steel construction for durability and easy cleaning
• Maintenance-friendly design
• Hands-free, battery-operated sensor faucet to reduce the potential spread of bacteria
• Laminar flow to minimize splash and provide the recommended flow for sufficient hand washing
• Cap over drain to reduce airborne germs

This Stylist Group ADA compliant single bowl 20 in. x 17 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

This Stylist Group ADA compliant single bowl 20 in. x 19 in. drop-in sink with rear ledge, from JUST MANUFACTURING. It is a seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge type 304 stainless steel
• ADA compliant
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Fully coated underside
• Grip-rim plus self-rimming 300 series stainless steel mounting channel
• Conforms to ASME/ANSI A112.19.3M

Eco Portable Wash-Ware units can be set up anywhere clean hands are needed, indoors or out. The design of the Eco Portable Wash-Ware unit allows for convenient flat-pack shipment with quick and easy setup. This model provides a connection to a 3/4 in. hose for fresh water supply; waste is collected in an onboard 5 Gal. tank. The back of this unit is exposed, providing access for the hose connections and the waste thank. Casters are included. The single handle gooseneck faucet has a 0.5 GPM flow control.

• Portable hand-wash unit ships unassembled allowing for easy transport and comes ready to assemble
• Cabinet is fabricated of type 304 stainless steel with exposed surfaces polished to a #4 satin finish
• Access to plumbing and storage components is through rear of cabinet or removable front access panel
• Cabinet assembly is provided with a set of square rubber feet
• Countertop includes a marine edge to enable drainage around the rim of the integral trapezoidal lavatory bowl
• Water supply is from an existing plumbed, potable water source with a hose
• Wastewater is collected in a removable wastewater tank
• Handle faucet for manual activation

This Stylist Group double bowl 22 in. x 33 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Exposed surfaces polished with hand-blended just finish
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

Bradley Classic Washfountain is designed for heavy duty hand washing. It features a 54 in. circular bowl and foot control for hands free operation. This unit can accommodate up to 8 users with total water usage of 5 Gal. per minute.

• Foot control activation
• Floor mounted
• 54 in. stainless steel bowl size
• Highly vandal resistant
• ADA compliant
• cUPC approval
• 14-Gauge stainless steel
• 4-polished finish

Portable hand washing stations can help meet the healthcare standards for schools, daycares, doctor's offices, breakrooms and cafeterias. This portable station is convenient for any indoor use and rugged enough for outdoor use at sporting events and other locations where water is limited and hands-free cleanliness a must. These hand wash sink stations are essential in the management of clean water and good hygiene practices. Many public areas and classrooms do not have access to a traditional sink with hot and cold running water. With these portable hand wash stations, facilities are able to immediately and easily expand hand washing capabilities to help prevent the spread of pathogens and provide a positive hand washing experience while allowing convenient hand washing anywhere.

• Stainless steel construction of heavy duty 16/18-Gauge USA mill certified type 304, stainless steel
• Single wash station
• Hands-free sensor faucet
• Offset drain location, rear corner to reduce aerosolization
• Grab bar handle
• 120-Volt water heater 2 Gal.
• 120-Volt water pump
• Portable micro cart with EZ roll locking casters

This Stylist Group double bowl 19 in. x 33 in. drop-in sink from JUST MANUFACTURING. Seamless die-drawn construction of 18-Gauge type 304 stainless steel. Interior and top surfaces satin blended No. 4 finish. Fully coated under-side insulates for sound and reduces condensation. Straight sided compartment with 1-3/4 in. radius corners provides greater capacity. Self-rimming top mount with Grip-Rim Plus with stainless steel mounting channels.

• 18-Gauge USA mill certified type 304, stainless steel
• Seamless die-drawn construction
• Maximum capacity straight-sided compartment with 1-3/4 in. radius corners
• Exposed surfaces polished with hand-blended just finish
• Fully coated underside insulated for sound and reduces condensation
• Grip-rim plus with stainless steel mounting channels
• Drain punched #35 centered

Sentry 36 in. Semi-Circular Stainless Steel Washfountain. This product features a reliable pushbutton activation and meets all ADA requirements. The stainless steel offers high vandal resistance and is easy to clean.

• 36 in. semi-circular bowl size
• Floor mounted
• 14-Gauge type 304 stainless steel with a #4 polish
• Push button activation
• Meets ADA requirements
• Factory tested and ships pre-assembled
• Vandal resistant and easy to clean