Water Heater Accessories

Price
Brand
Accessory Type
Actual outside diameter (in.)
Amperage
Biodegradable
Certifications and Listings
Color
Color Family
Connection
Connection 1
Connection 2
Cord Length (ft.)
Features
Finish Family
Fitting 1 size
Fitting 2 size
Fitting Material
Fitting or Connector Type
Fuel Type
HVAC Product Type
Indoor/Outdoor
Inlet Diameter (in.)
Length (ft.)
Material
Pack Size
Pipe or Fitting Product Type
Pipe Size
Plumbing Part Type
Product Depth (in.)
Product Height (in.)
Product Length (in.)
Product Type
Product Width (in.)
Standard Color Family
Usage
Use
Other Refinements
Items per page: 24   48  
Sort By:
Proplus 4,500-Watt, 240-Volt Screw-in High-Density Water Heater Element
Item # 481078

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

  • Sheath material platted copper sheath and platted steel screw plug
  • Volt: 240-Volt
  • Watt: 4500-Watt
  • Design type high watt density fold back (2 passes)
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 18 in. Braided Stainless Steel Water Heater Connector
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 18 in. Braided Stainless Steel Water Heater Connector
Item # 134238
Lead-Free Product.

The 3/4 in. x 18 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

  • Lead free DZR brass fittings, braided stainless steel hose
  • Use to connect water heater to any combination of copper, PEX, or CPVC pipe
  • Innovative push-fit design makes for quick and easy installation
  • Push-fit connections require no solder, glue, or unions
  • Decreases the amount of time and effort needed to connect water heater to pipe
  • Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
  • Corrosion resistant to improve longevity
  • Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
  • Meets IAPMO, UPC, IPC and cUPC requirements
  • 3/4 in. pipe insertion depth - 1-1/8 in.
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 24 in. Copper Water Heater Connector
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 24 in. Copper Water Heater Connector
Item # 3582027

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

  • Extremely durable corrugated copper construction
  • Built in dielectric sleeves negates the need for a separate dielectric union
  • Easily adapts to water heaters with standard male pipe threads
  • IAPMO certified
  • 3/4 in. size
  • 24 in. L
  • FIP connections
  • Zinc plated nuts
  • Thick rubber washer to create a tight seal
  • Designed for use in residential and commercial applications for water heater hookups

Log in to see your price and availability.

Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 24 in. Braided Stainless Steel Water Heater Connector
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 24 in. Braided Stainless Steel Water Heater Connector
Item # 134240
Lead-Free Product.

The 3/4 in. x 24 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

  • Lead free DZR brass fittings, braided stainless steel hose
  • Use to connect water heater to any combination of copper, PEX, or CPVC pipe
  • Innovative push-fit design makes for quick and easy installation
  • Push-fit connections require no solder, glue, or unions
  • Decreases the amount of time and effort needed to connect water heater to pipe
  • Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
  • Corrosion resistant to improve longevity
  • Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
  • Lead free
  • 3/4 in. pipe insertion depth = 1-1/8 in.
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Camco Lower Water Heater Thermostat, Tod Style, Bulk
Camco Lower Water Heater Thermostat, Tod Style, Bulk
Item # 481605

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120° by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

  • UL and CSA listed
  • I year limited warranty
  • Energy efficient range setting
  • Application Voltage 240/208/277/120/480
  • Factory pre-set at 120°F
  • Adjustable temperature settings
  • Therm-O-Disc style
  • Lower thermostat
  • Wiring diagram included
  • Universal replacement part
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Fluidmaster 3/4 in. F.I.P. x 3/4 in. F.I.P. x 24 in. L Braided Stainless Steel Water Heater Connector
Fluidmaster 3/4 in. F.I.P. x 3/4 in. F.I.P. x 24 in. L Braided Stainless Steel Water Heater Connector
Item # 481020

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. L and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

  • Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
  • Easy to install
  • Durable braided stainless steel build
  • Highly flexible to resist kinks and creases in tight spaces
  • Heavy-duty nickel plated brass hex nuts are easy to grip
  • 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
  • 24 in. L
  • Lead free and meeting all code requirements
  • 5-year warranty
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Camco High-Limit Upper Water Heater Thermostat, Tod Style, Bulk
Camco High-Limit Upper Water Heater Thermostat, Tod Style, Bulk
Item # 481600

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120° by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

  • UL and CSA listed
  • I year limited warranty
  • Energy efficient range setting
  • Application Voltage 240/208/277/120/480
  • Factory pre-set at 120°F
  • Adjustable temperature settings
  • Therm-O-Disc style
  • Built-in safety switch to prevent overheating
  • Bulk item - no packaging
  • Universal replacement part
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
3/4 in. Push-to-Connect x 3/4 in. FIP x 18 in. Braided Stainless Steel Water Heater Connector with Integrated Ball Valve
3/4 in. Push-to-Connect x 3/4 in. FIP x 18 in. Braided Stainless Steel Water Heater Connector with Integrated Ball Valve
Item # 2465700
Eco-friendly item. Symbol indicates that the product is part of our EcoSource green purchasing program. Product meets our sustainability standards for one or more of the following high-performance categories: Water Conservation, Energy Efficiency, Indoor Air Quality, and Material Selection. Lead-Free Product.

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

  • Lead free DZR brass fittings, braided stainless steel hose
  • Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
  • Innovative push-to-connect design makes for quick and easy installation
  • Push-to-connect fittings require no solder, glue, unions or tools
  • Fitting can be rotated on pipe after installation making it easier to work in tight spaces
  • Designed for potable water distribution as well as hydronic heating applications
  • Corrosion resistant to improve longevity
  • Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
  • Meets IAPMO, UPC, IPC, and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • Rated to 200°F and 200 psi
  • 3/4 in. pipe insertion depth = 1-1/8 in.
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Zurn 3/4 in. Dielectric Union
Zurn 3/4 in. Dielectric Union
Item # 331005LF
Lead-Free Product.

Zurn is proud to offer a broad selection of manual and sensor flush valves to meet building owners' and facilities managers' wide variety of needs. Our EcoVantage water-conserving valves lead the industry with the highest levels of performance while maximizing water savings. We were the first to launch the pint urinal, and we're still leading the market with our Omni-Flo urinal and 1.1 GPF AquaVantage flush valves. And with a wide variety of technologies and installation types, specifiers are sure to find a product to suit their applications.

  • Easy to install
  • Labor saver
  • Time saver
  • Trusted industry name
  • Durable material
  • Lead free
  • Retrofit
  • Commonly used on residential water heaters
  • Industry leading
  • 1 point of contact for service
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Falcon Stainless 3/4 in. I.D. SS Flex with 3/4 in. FIP x 3/4 in. FIP x 24 in.
Falcon Stainless 3/4 in. I.D. SS Flex with 3/4 in. FIP x 3/4 in. FIP x 24 in.
Item # SX-0156851

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

  • 304 series stainless steel
  • Extremely flexible
  • Will not corrode or rust
  • High temp EPDM washer chlorine and chloramine resistant
  • Highest flow rate in the industry - no restrictions
  • 100% leak tested
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
HOLDRITE 80 gal. Nylon Water Heater Restraint (Box of 20)
HOLDRITE 80 gal. Nylon Water Heater Restraint (Box of 20)
Item # 950146

Holdrite Quick Strap water heater restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment, making Quick Strap a superior seismic mounting solution. Holdrite Quick Strap is preferred by Do It Yourself, Do It for Me, and professional contractors because it provides the highest quality, safest and easiest installation.

  • Most tested and recognized water heater restraint
  • Soft-belt style water heater strap kit
  • Supports up to 80 gal. water heaters
  • Includes self-drilling wall anchor hardware
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Falcon Stainless 3/4 in. I.D. SS Flex with 3/4 in. FIP x 3/4 in. FIP x 18 in.
Falcon Stainless 3/4 in. I.D. SS Flex with 3/4 in. FIP x 3/4 in. FIP x 18 in.
Item # SX-0156844

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 18 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

  • 304 series stainless steel
  • Extremely flexible
  • Will not corrode or rust
  • High temp EPDM washer chlorine and chloramine resistant
  • Highest flow rate in the industry - no restrictions
  • 100% leak tested
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Camco 24 in.  Aluminum Water Heater Pan with PVC Fitting
Camco 24 in. Aluminum Water Heater Pan with PVC Fitting
Item # 481024

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

  • Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
  • Pre-cut side opening for drain fitting
  • Electric or gas water heater use
  • 24 in. inside diameter
  • 25 in. outside diameter
  • Recyclable
  • Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
  • Will not rust or crack
  • Helps prevent damage from water leaks
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Proplus 4500-Watt 240-Volt Screw-in Low Density Water Heater Element
Item # 481246

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

  • Sheath material platted copper sheath and platted steel screw plug
  • Volt: 240-Volt
  • Watt: 4500-Watt
  • Storage tank type: storage tank is required to have a recessed tank flange
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 24 in. Stainless Steel Water Heater Connector
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 24 in. Stainless Steel Water Heater Connector
Item # 3582032

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

  • Extremely durable corrugated stainless-steel construction
  • Built in dielectric sleeves negates the need for a separate dielectric union
  • Easily adapts to water heaters with standard male pipe threads
  • IAPMO certified
  • 3/4 in. size
  • 24 in. L
  • FIP connections
  • Zinc plated nuts
  • Thick rubber washer to create a tight seal
  • Designed for use in residential and commercial applications for water heater hookups

Log in to see your price and availability.

Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. Stainless Steel Water Heater Connector
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. Stainless Steel Water Heater Connector
Item # 3582031

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 12 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

  • Extremely durable corrugated stainless-steel construction
  • Built in dielectric sleeves negates the need for a separate dielectric union
  • Easily adapts to water heaters with standard male pipe threads
  • IAPMO certified
  • 3/4 in. size
  • 18 in. L
  • FIP connections
  • Zinc plated nuts
  • Thick rubber washer to create a tight seal
  • Designed for use in residential and commercial applications for water heater hookups

Log in to see your price and availability.

Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Camco High-Limit Upper Water Heater Thermostat, Tod Style, Carded
Camco High-Limit Upper Water Heater Thermostat, Tod Style, Carded
Item # 481545

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120°F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

  • UL and CSA listed
  • 1-year limited warranty
  • Energy efficient temperature range setting
  • Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
  • High limit control
  • Temperature can be set from 90° to 150°
  • Built-in safety switch to prevent overheating
  • Wiring diagram included
  • For electric water heaters
  • Upper thermostat
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector
Item # 3582025

HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

  • Extremely durable corrugated copper construction
  • Built in dielectric sleeves negates the need for a separate dielectric union
  • Easily adapts to water heaters with standard male pipe threads
  • IAPMO certified
  • 3/4 in. size
  • 18 in. L
  • FIP connections
  • Zinc plated nuts
  • Thick rubber washer to create a tight seal
  • Designed for use in residential and commercial applications for water heater hookups

Log in to see your price and availability.

Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Fluidmaster 3/4 in. F.I.P. x 3/4 in. F.I.P. x 18 in. L Braided Stainless Steel Water Heater Connector
Fluidmaster 3/4 in. F.I.P. x 3/4 in. F.I.P. x 18 in. L Braided Stainless Steel Water Heater Connector
Item # 481017

The Fluidmaster B1H18 18 in. Water Heater Connector is a top choice when replacing your water heater supply line. Installation is fast and easy, with easy grip brass hex nuts, and exceptional flexibility that resists kinks or creases in the tightest spaces. This replacement water heater connector fits 3/4 in. F.I.P. x 3/4 in. F.I.P. connections. Designed with quality in mind this water heater connector showcases a 5 year warranty, durable braided stainless steel materials, and nickel plated heavy duty brass hex nuts. Replace old, creased, or problem water heater connectors with a quality you can trust. Lead free and meeting all code requirements. Upgrade your water heater supply line now, to a Fluidmaster Connector.

  • Highly flexible water heater connector that resists kinks and creases
  • Easy to install, the heavy-duty nickel plated brass hex nuts are easy to grip
  • 3/4 in. F.I.P. x 3/4 in. F.I.P
  • 18 in. L
  • Lead free, and meeting all code requirements
  • Quickly replace risky faulty and old connector models
  • 5 year warranty
  • Featuring a durable build from braided stainless steel
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 15 in. Braided Stainless Steel Water Heater Connector
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 15 in. Braided Stainless Steel Water Heater Connector
Item # 134241
Lead-Free Product.

The 3/4 in. x 15 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

  • Lead free DZR brass fittings, braided stainless steel hose
  • Use to connect water heater to any combination of copper, PEX, or CPVC pipe
  • Innovative push-fit design makes for quick and easy installation
  • Push-fit connections require no solder, glue or unions
  • Decreases the amount of time and effort needed to connect water heater to pipe
  • Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
  • Corrosion resistant to improve longevity
  • Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
  • Meets IAPMO, UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • 3/4 in. pipe insertion depth - 1-1/8 in.
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
NATIONAL BRAND ALTERNATIVE APCOM WH10-6 HIGH-LIMIT UPPER WATER HEATER THERMOSTAT, 2 ELEMENTS
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Camco 22 in.  Aluminum Water Heater Pan with PVC Fitting
Camco 22 in. Aluminum Water Heater Pan with PVC Fitting
Item # 481012

This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

  • Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
  • Pre-cut side opening for drain fitting
  • Electric or gas water heater use
  • 22 in. inside diameter
  • 23 in. outside diameter
  • Recyclable
  • Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
  • Will not rust or crack
  • Helps prevent damage from water leaks
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 12 in. Braided Stainless Steel Water Heater Connector
SharkBite 3/4 in. Push-to-Connect x 3/4 in. FIP x 12 in. Braided Stainless Steel Water Heater Connector
Item # 134239
Lead-Free Product.

The 3/4 in. x 12 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

  • Lead free DZR brass fittings, braided stainless steel hose
  • Use to connect water heater to any combination of copper, PEX, or CPVC pipe
  • Innovative push-fit design makes for quick and easy installation
  • Push-fit connections require no solder, glue or unions
  • Decreases the amount of time and effort needed to connect water heater to pipe
  • Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
  • Corrosion resistant to improve longevity
  • Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
  • Meets IAPMO, UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Proplus 3500-Watt, 240-Volt Screw-in High Density Water Heater Element
Item # 481060

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

  • Sheath material platted copper sheath and platted steel screw plug
  • Volt: 240-Volt
  • Watt: 3500-Watt
  • Design type low watt density fold back (4 passes)
Units: Each
Qty:

Add to Favorites List Add to Customized Product OfferingPlease Wait Remove From Customized Product OfferingPlease Wait Add To Bin LabelsPlease Wait Added to Bin Labels. Click icon to print Bin Labels. Add To Custom CatalogPlease Wait Added To Custom Catalog. Click icon to print Custom Catalog. Email
Loading