Water Heater Accessories
The 3/4" P1500XL Calibrated Pressure Relief Valve protects against excessive pressure buildup on cold water service lines. The P1500XL is for pressure only, and is utilized in conjunction with other temperature-limiting devices. Features include field adjustable settings from 25 to 175 psi with calibration marks etched on the stem, and a cast bronze valve body with stainless steel internals and springs. Suitable for static relief, low capacity pump relief, passive solar, and thermal expansion relief applications, it can also be used in similar capacities for both commercial and industrial applications.
- Suitable for static relieve, low capacity pump relief, passive solar, expansion relief and a variety of commercial and industrial applications ensures you get the most for your money
- Male NPT inlet and female NPT outlet provide easy installation
- Protection against excessive pressure buildup on cold water service lines
- Suitable for static releive, low capacity pump relief, passive solar, expansion relief and a variety of commercial and industrial applications ensures you get the most for your money
- Field adjustable psi settings of 25 to 175 psi add versatility and decrease maintenance time
- Cast bronze main valve body and stainless steel internals/springs protect against corrosion
- Certified to NSF/ANSI 372 by IAPMO R&T
- Lead-free
The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets IAPMO, UPC, IPC, and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 3/4 in. pipe insertion depth = 1-1/8 in.
The 1/2 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX, or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue, or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
- Meets IAPMO, UPC, IPC, and cUPC requirements
- 1/2 in. Pipe Insertion Depth = 15/16 in.
This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. This two-in-one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with extended shank to accommodated up to 2 1/2 IN of insulation, NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar).
- Lead free copper alloy body construction
- Extended shank for thick tank insulation up to 2 1/2 inches
- Extension thermostat with thermo-bonded coating
- Stainless steel spring
- Pressure relief range is 75 to 150 psi
- ASME rated, CSA Listed
- NPT male inlet and NPT female outlet connections
- Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr
- ANSI Z21.22 certified
- Includes test lever and stainless steel spring
The 1/2" P1500XL Calibrated Pressure Relief Valve protects against excessive pressure buildup on cold water service lines. The P1500XL is for pressure only, and is utilized in conjunction with other temperature-limiting devices. Features include field adjustable settings from 25 to 175 psi with calibration marks etched on the stem, and a cast bronze valve body with stainless steel internals and springs. Suitable for static relief, low capacity pump relief, passive solar, and thermal expansion relief applications, it can also be used in similar capacities for both commercial and industrial applications.
- Male NPT inlet and female NPT outlet provide easy installation
- Protection against excessive pressure buildup on cold water service lines
- Suitable for static releive, low capacity pump relief, passive solar, expansion relief and a variety of commercial and industrial applications ensures you get the most for your money
- Field adjustable psi settings of 25 psi to 175 psi add versatility and decrease maintenance time
- Cast bronze main valve body and stainless steel internals/springs protect against corrosion
- Certified to NSF/ANSI 372 by IAPMO R and T
- Lead free
- Easy to install
- Trusted name
- 1 point of contact for service
The P1000AXL-30C Pressure Relief Valve is set at 30 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks
- Epoxy-coating adds extra protection
- Pressure relief valve set at 30 psi
- CSA Compliance to ANSI Z21.22/CSA 4.4
- Certified to ASME Section IV by National Board
- Easy to install
The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks
- Epoxy-coating adds extra protection
- Pressure relief valve set at 150 psi
- CSA Compliance to ANSI Z21.22/CSA 4.4
- Certified to ASME Section IV by National Board
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility
SharkBite Push-to-Connect x Female Pipe Thread Water Heater Connection Kit is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
The 1" DUXL Dielectric Union is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the DUXL include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The DUXL comes standard with a a female iron pipe x female brass pipe.
- Flexible design couples dissimilar piping materials for ultimate convenience
- Designed for lasting wear on potable water applications
- Protects against pipe deterioration from galvanic and stray current corrosion
- Zinc-coated steel body resists corrosion
- Female iron pipe x female brass pipe
- Certified to NSF/ANSI 372 by IAPMO R&T
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- FIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
Use this product on appropriate water heaters. Please follow instructions carefully. Instructions should be included in paperwork.
- Protection plan category is water heaters
- No deductibles
- Power surge protection provided
- Up to 90-day cancellation
Ideal for use where Lead-Free fittings are required. Designed for installation on potable water lines to protect against piping system deterioration caused by galvanic and stray current corrosion. A dielectric fitting is necessary where dissimilar metals are used in piping systems.
- 3/4 in. inlet x 1/2 in. outlet dielectric union pipe fitting
- Dielectric fitting is necessary where dissimilar metals are used in piping systems
- Female iron pipe by female copper sweat
- Safe and easy to install
- Body steel with zinc coat
- Union nut steel with zinc coat
- Bolts and nuts steel with zinc coat
- Tailpiece low lead brass
- Insulator nylon
- Gaskets EPDM
- Flexible design couples dissimilar piping materials for ultimate convenience
- Designed for lasting wear on potable water applications protects against pipe deterioration from galvanic and stray current corrosion
- Zinc-coated steel body resists corrosion Female iron pipe x female brass pipe
- Certified to NSF/ANSI 372 by IAPMO R&T
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- FIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
The 1/2 in. x 24 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. to 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX, or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue, or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
- Meets IAPMO, UPC, IPC, and cUPC requirements
- 1/2 in. Pipe Insertion Depth = 15/16 in.
The Heat Exchanger needs to be flushed to prevent damage from Scale Build-up. Isolation Valves allow for full diagnostic testing and easy flushing of the system. Please refer to the Owners Guide or Installation Manual for more information regarding this procedure.
- Easy to install
- Copper material
- Compatible with:NR501 series NR662 series NR83 series NR981 series NRC661 series NRC711 series NRC98 series NRC1111 series NRC663 series NC380 series (F only)
- Will give the install a nice and clean finished look
- 3/4 in.
- Sweat ISO valves
- Hot water valve included
- Cold water valve included
- Installation manual inside box
- 500,000 BTu/hr pressure relive valve
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- MIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- MIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
The 3/4" DUXLM Dielectric Union Pipe Fitting with is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the 3/4" DUXLM include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The 3/4" DUXLM comes standard with a male iron pipe x female copper sweat joint.
- Flexible design couples dissimilar piping materials for ultimate convenience
- Designed for lasting wear on potable water applications
- Protects against pipe deterioration from galvanic and stray current corrosion
- Zinc-coated steel body resists corrosion
- Male iron pipe x female copper sweat
- Union nut steel with zinc coat
- Tailpiece low lead brass
- Bolts and nuts steel with zinc coat
- Insulator nylon
- Certified to NSF/ANSI 372 by IAPMO R and T
The 1/2 in. x 12 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
- Meets IAPMO, UPC, IPC and cUPC requirements
- Lead free
- 1/2 in. pipe insertion depth 15/16 in.
The 1/2 in. x 18 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-to-Connect end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets all UPC, IPC, and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 1/2 in. pipe insertion depth - 15/16 in.
1/2 in. push to connect x 3/4 in. FIP x 15 in. SharkBite water heater connector allows you to easily connect your hot and cold-water supply lines to your water heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the water heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite push-fit end onto copper, PEX or CPVC pipes and your water heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. available with integrated ball valve) and are also available in corrugated stainless steel. SharkBite water heater connectors will decrease the amount of time and effort needed to install a water heater in your home and are the fastest way to complete your project.
- Lead-free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Meets ASME A112.18.6
- Lead-free
- 1/2 in. pipe insertion
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- FIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
Falcon Stainless Connector 7/8 in. Copper Sleeve (Sweat) by 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Professional Installation Recommended.
- 304 series stainless steel
- True 31/32 in. ID
- Flows approximately 135% more than braided type
- Maintains optimum flow with no restriction
- Kink and crimp free
- Chrome plated brass nuts
- Extremely flexible
- Will not corrode or rust
- No dielectric union required
- High temp EPDM washer
- Resists work hardening
- Working pressure 200 psi
- Burst pressure approximately 1850 psi
- 100% leak tested
- Dual purpose sweat installation
- Slip over copper pipe and sweat or cut and insert into ball valve
- Lifetime warranty
- Temperature rating -40 degree F to 250 degree F
Noritz External Recirculation Pump Kit. Pump comes pre-assembled with a wiring harness to be easily connected into the water heater. The recirculation system can be programmed with included Commercial Remote (RC-9018M).
- Recirculation pump and commercial remote come pre-assembled
- Recirculation system can be programmed with included commercial remote
- 3-speed pump (low, medium, and high settings) to dial in for enhanced performance
- Only compatible with Noritz model heaters (NG or LP).
- Max flow rate of 25 GPM and 10.08 ft. head max
- RPK-EXT are compatible with outdoor models, but pump kit must be installed indoors