Water Heater Accessories
The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.
- Secures expansion tank to wall
- Galvanized and stainless steel construction
- Supports tanks up to 13 in. Dia
- Supports tanks up to 5 Gal.
- Includes mounting bracket, 2 support straps and mounting screws
- Quick-release stainless steel bands
- Fast and easy installation
- Takes load weight off pipes
- HOLDRITE quick strap brand
- Water heater accessories
This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 24 in. I.D.
- 25 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 24 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4" FIP connections
- Chrome plated brass supply nuts.
- Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2 passes)
Holdrite Quick Strap water heater restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment, making Quick Strap a superior seismic mounting solution. Holdrite Quick Strap is preferred by Do It Yourself, Do It for Me, and professional contractors because it provides the highest quality, safest and easiest installation.
- Most tested and recognized water heater restraint
- Soft-belt style water heater strap kit
- Supports up to 80 Gal. water heaters
- Includes self-drilling wall anchor hardware
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- Corrugated stainless steel tubing is .01 in. / 25mm thick
- 18 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4 in. FIP connectors
- Chrome plated brass supply nuts
- Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- For use with water only in accessible locations
- Conforms to ASME A112.18.6/CSAB125.6
Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.
- 304 series stainless steel
- Extremely flexible
- Will not corrode or rust
- High temp EPDM washer chlorine and chloramine resistant
- Highest flow rate in the industry - no restrictions
- 100% leak tested
- Supply line type
- 1.25 in. width, .4 lbs. wide
- Under lifetime warranty
- Silver color
Hercules Haymaker Tankless Water Heater Descaler quickly and easily dissolves inorganic deposits that restrict flow to restore circulation and heat transfer efficiency. It's safe for potable water systems and is non corrosive. Behold the power of Hercules, products built to last and trusted by plumbers to withstand even the toughest conditions.
- Citric acid-based, non-corrosive and VOC-free
- Removes carbonates, sulfates, phosphates, rust, oxides and other mineral deposits
- Dissolves inorganic deposits that restrict flow
- Compatible with most commonly found plumbing-related materials including PVC, CPVC, ABS, rubber, steel and most metals
- Other applications include descaling non-aluminum heat exchangers and water heaters
- Extends the life of the appliance when used as part of a regularly scheduled preventative maintenance program
- Easy to use for long-term boiler function
- Safe for septic systems and sewers
- Safe for potable water systems
- Limited warranty
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Material type constructed of rubber material
- Design type high watt density fold back (2 passes)
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 24 in. length
- For water use only in accessible locations
- FIP connections; Minimum Bend Radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
- Stainless steel retainer adds strength and durability.
- High-performance DZR lead-free brass body.
- No special tools, crimping, soldering or glue required.
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 3500-Watt
- Design type high watt density hair pin (2 passes)
This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 22 in. inside diameter
- 23 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Fitting included
The Camco 11360 24 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.
- For electric water heaters only
- 24 in. ID ; 26 in. OD
- Recyclable
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipe
- 2.5 in. H
- Pans are injection molded for superior strength and durability
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2-passes)
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 3500-Watt
- Design type low watt density fold back (4 passes)
The NCLX-5LX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. Test lever standard. Temperature relief setting is 210 degree F (99 degree C).
- Provides effective isolation from mineral deposits and galvanic corrosion
- Completely automatic and reseats after temperature or pressure relief
- Every valve is tested for performance prior to shipping
- Listed by CSA and ASME
- Factory set at 150 psi
- Maximum temperature of 210 degree F
- Male inlet
- Female outlet
- Cast bronze body
- Brass and stainless steel internal parts
This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.
- UL and CSA listed
- I year limited warranty
- Energy efficient range setting
- Application voltage 240/208/277/120/480
- Factory pre-set at 120 degree F
- Adjustable temperature settings
- Therm-o-disc style
- Built-in safety switch to prevent overheating
- Bulk item - no packaging
- Universal replAcement part
This Camco 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 26 in. inside diameter
- 27 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.
- Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
- Easy to install for plumbers/homeowners
- Meets plumbing and real estate codes
- Patented quick link system provides secure frontal attachment
- 24 gauge galvanized steel
- California Division State Architect approval #98-018
- California Division State Architect approval #97-010
- UPC/IPC/IAPMO listed
- Up to 80 gallon water heater
- Hardware included
This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.
- UL and CSA listed
- 1-year limited warranty
- Energy efficient temperature range setting
- Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
- High limit control
- Temperature can be set from 90 degree to 150 degree
- Built-in safety switch to prevent overheating
- Wiring diagram included
- For electric water heaters
- Upper thermostat
This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.
- UL and CSA listed
- I year limited warranty
- Energy efficient range setting
- Application voltage 240/208/277/120/480
- Factory pre-set at 120 degree F
- Adjustable temperature settings
- Therm-o-disc style
- Lower thermostat
- Wiring diagram included
- Universal replAcement part
The NORITZ 2 in. PVC bird screen provides proper protection for intake on your tankless water heater. It prevents debris from entering the heater, which helps to lengthen the unit's lifespan. Its PVC material make it easy to install to the termination on the water heater.
- For 2 in. PVC terminations
- Prevents debris from entering the intake or exhaust
- Protect your venting from birds and other critters
- Provides a nice, clean look to your installation
- For condensing gas tankless models
- Compact design
- For finished applications
- Durable and weather resistant
- Made of PVC material
- Optional vent accessory
The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.
- Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
- Easy to install
- Durable braided stainless steel build
- Highly flexible to resist kinks and creases in tight spaces
- Heavy duty nickel plated brass hex nuts are easy to grip
- 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
- 24 in. L
- Lead free and meeting all code requirements
- 5-year warranty