Water Heater Accessories
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 24 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4" FIP connections
- Chrome plated brass supply nuts.
- Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.
- Secures expansion tank to wall
- Galvanized and stainless steel construction
- Supports tanks up to 13 in. Dia
- Supports tanks up to 5 Gal.
- Includes mounting bracket, 2 support straps and mounting screws
- Quick-release stainless steel bands
- Fast and easy installation
- Takes load weight off pipes
- HOLDRITE quick strap brand
- Water heater accessories
This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 24 in. I.D.
- 25 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Material type constructed of rubber material
- Design type high watt density fold back (2 passes)
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 24 in. length
- For water use only in accessible locations
- FIP connections; Minimum Bend Radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- Corrugated stainless steel tubing is .01 in. / 25mm thick
- 18 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4 in. FIP connectors
- Chrome plated brass supply nuts
- Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- For use with water only in accessible locations
- Conforms to ASME A112.18.6/CSAB125.6
Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.
- 304 series stainless steel
- Extremely flexible
- Will not corrode or rust
- High temp EPDM washer chlorine and chloramine resistant
- Highest flow rate in the industry - no restrictions
- 100% leak tested
- Supply line type
- 1.25 in. width, .4 lbs. wide
- Under lifetime warranty
- Silver color
The Homewerks Dielectric Union prevents electrolysis or galvanic action when connecting dissimilar materials. Pressure rated at 150 psi at 180 degree F. Complies with 0.25% weighted average lead content on wet surfaces.
- 3/4 in. dielectric union
- Prevents electrolysis or galvanic action when connecting stainless steel and copper pipe
- Pressure rated at 150 psi at 180 degree F
- Complies with 0.25% weighted average lead content on wet
- Compatible with copper and steel
- Components of this union are not interchangeable with other manufacturer's unions
- FIP x SWT
The 3/4 in. x 24 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX, or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue, or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
- Lead free
- 3/4 in. pipe insertion depth = 1-1/8 in.
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2 passes)
This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 22 in. inside diameter
- 23 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Fitting included
Holdrite Quick Strap water heater restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment, making Quick Strap a superior seismic mounting solution. Holdrite Quick Strap is preferred by Do It Yourself, Do It for Me, and professional contractors because it provides the highest quality, safest and easiest installation.
- Most tested and recognized water heater restraint
- Soft-belt style water heater strap kit
- Supports up to 80 Gal. water heaters
- Includes self-drilling wall anchor hardware
The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets IAPMO, UPC, IPC, and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 3/4 in. pipe insertion depth = 1-1/8 in.
The Orbit 24-Volt Solenoid Replacement makes sprinkler valve fixes quick and easy. The included adapter allows this 24-Volt solenoid to work with any of Orbits automatic valves. The high-quality construction provides years of dependable use.
- 22 in. I.D.
- 24 in. O.D.
- For electric water heater only
- Side opening for drain fitting
- Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
- Durable polypropylene construction
- Will not rust, corrode or crack
- Black color
- Tools required for drain installation
- 1-year limited warranty
The 3/4 in. x 18 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. - 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX, or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue, or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
- Meets IAPMO, UPC, IPC and cUPC requirements
- 3/4 in. pipe insertion depth - 1-1/8 in.
The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.
- Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
- Easy to install
- Durable braided stainless steel build
- Highly flexible to resist kinks and creases in tight spaces
- Heavy duty nickel plated brass hex nuts are easy to grip
- 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
- 24 in. L
- Lead free and meeting all code requirements
- 5-year warranty
Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 18 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.
- 304 series stainless steel
- Extremely flexible
- Will not corrode or rust
- High temp EPDM washer chlorine and chloramine resistant
- Highest flow rate in the industry - no restrictions
- 100% leak tested
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 18 in. length
- For use with water only in accessible locations
- FIP connections; Minimum recommended bend radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
Upper T-Stat with High Limit 2-Elements, 1-19/32" X 3-27/32".
This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.
- UL and CSA listed
- I year limited warranty
- Energy efficient range setting
- Application voltage 240/208/277/120/480
- Factory pre-set at 120 degree F
- Adjustable temperature settings
- Therm-o-disc style
- Lower thermostat
- Wiring diagram included
- Universal replAcement part
The NORITZ 2 in. PVC bird screen provides proper protection for intake on your tankless water heater. It prevents debris from entering the heater, which helps to lengthen the unit's lifespan. Its PVC material make it easy to install to the termination on the water heater.
- For 2 in. PVC terminations
- Prevents debris from entering the intake or exhaust
- Protect your venting from birds and other critters
- Provides a nice, clean look to your installation
- For condensing gas tankless models
- Compact design
- For finished applications
- Durable and weather resistant
- Made of PVC material
- Optional vent accessory
The Camco 11360 24 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.
- For electric water heaters only
- 24 in. ID ; 26 in. OD
- Recyclable
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipe
- 2.5 in. H
- Pans are injection molded for superior strength and durability
The 3/4" DUXLC Dielectric Union is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the 3/4" DUXLC include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The 3/4" DUXLC comes standard with a female iron pipe x female copper sweat joint.
- Multiple size options for versatile installation
- Couples dissimilar piping materials for ultimate convenience and low installation costs
- High protection from piping deterioration
- Female iron pipe x female copper sweat connection comes standard
- Certified to NSF/ANSI 372 by IAPMO R&T
- Easy To Install
- Dielectric Union
- Commonly used on residential water heaters
- installed on potable water lines
- 175 maximum pressure