Water Heaters & Accessories
Superior full port potable water connectors for water heaters and water treatment. Connectors are more bendable and flexible than copper. They will not discolor, corrode, rust, crimp or kink.
- Best for installation water heaters and water softeners
- Product made of corrugated stainless steel
- This product has no plastic hose or insert to reduce flow
- Product is environmentally friendly
- Lifetime warranty
- Flows more than any other type
- Will not burst
- High temp EPDM washer
- Resists work hardening
- Working pressure 200 psi
- Burst pressure approximately 1850 psi
- 100% leak tested
- No sweat installation
- Temperature rating -40 degree F to 250 degree F
- Bright annealed
The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 208-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
- Electric water heater is easy to maintain
- Delivers 45 Gal. of hot water in the first hour
- 6-year limited warranty on tank and parts for your convenience
- Over-temperature protector cuts off power in excess temperature situations
- Short tank fits in tight applications
- 0.93 uniform energy factor signifies an energy efficient water heater
- Meets or exceeds NAECA requirements
- Dual 4500-Watt heating elements
- Automatic thermostat keeps water at your desired temperature
- Requires a 208-Volt connection for installation
- If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
The plastic hood termination can be used to conceal PVC/CPVC piping to provide a clean, sleek finish to your venting system. The product itself is made out of PVC material. It is ideal for horizontal terminations.
- 3 in. PVC compatible
- 4 in. PVC compatible
- Not approved for Canada
- 1 year warranty
- 3 in. CPVC compatible
- 4 in. CPVC compatible
- Weather resistant
- For horizontal terminations
- Prevents heavy rain and snow entering water heater
- Prevents debris from entering water heater
3/4 in. Lead free Isolation valve kit with female threaded connections. Valve kits are an essential component for heater service and should be installed on all tankless water heaters. This fits all NORITZ models except NC132M/NC380 and NCC300. Fits all other tankless brands with 3/4 in. inlet and outlet.
- Includes pressure relief valve
- TH denotes threaded connection
- Double wall vent type
- ULC-S636 approved for use in Canada
- No need to shut off your water line
- Pressure relief valve has been rated for 500,000 BTUH
- Isolation valve is made of stainless-steel material, providing for extended product durability
- Kit is compatible with all residential NORITZ heaters
- Warranty is included in installation manual
- Installation is fast and easy
The Robertshaw 110 Series Water Heating Gas Valves are designed for universal replacement applications in water tanks. All models feature a built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. The ECO is designed to detect over-temperature conditions and to open. Once opened, the control will not function and a new replacement will be required.
- Outlet size: 1/2 in. inverted flare
- Pressure regulation: 4.0 in. WC natural gas
- Shank length: 1-3/8 in.
- Inlet size: 1/2 in. pipe
- Flow setting: 45,000 BTU
- Temperature: 160 degree F (71 degree C)
- Gas type: NG
- Sensing element: 5-1/2 in.
- Pressure tap: manifold
- Mounting: 3/4 in. NPT
- Domestic, commercial and recreational vehicle applications
Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.
- Please refer to instructions for installation
- If you can't install this product contact a qualified person
- Follow safety precautions
- 1-year limited warranty
- Metal construction
- Replacement thermostat
- Durable
- Long lasting
- Comes in a single
- Gray finish
The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.
- Direct replacement for Rheem, Ruud and Richmond gas water heaters
- Fits model: PROG50S-40N RH61
- Kit includes: Gas Valve and Installation Instructions
- Use only on Rheem water heaters
- Genuine OEM replacement kit
- Robust design
- Made of durable steel and plastic
- 1 year limited warranty
- Repair your water heater with peace of mind using genuine Rheem parts
- California residents see prop 65 warnings
The 1-1/4 in. DUXLC Dielectric Union is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the DUXLC include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The DUXLC comes standard with a female iron pipe x female copper sweat joint.
- Multiple size options for versatile installation
- Couples dissimilar piping materials for ultimate convenience and low installation costs
- High protection from piping deterioration
- Female iron pipe x female copper sweat connection comes standard
- Certified to NSF/ANSI 372 by IAPMO R and T
- Used with water heaters
- Easy to install
- For use with potable water
- Female sweat
- Bronze/Copper Metallic Finish
Residential condensate neutralizer for all EZ, NRC and NRCP Series only. The NC-1S is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane. The condensate is acidic and has the potential to harm the environment and the sewer system. The NC-1S will raise the pH of the condensate to a more neutral level before it is discharged to drain.
- Low profile design - provides ease of installation and can be mounted in a horizontal or vertical position mounted in a wall cavity and rated for zero clearance to combustibles
- Kit can be used with or in place of the built-in neutralizer sewer system
- Kit includes 3 in. PVC 90 degree elbow and a special anti-contaminant screen that fits directly onto the intake flue for a simple installation
- Design type high watt density fold back (4 passes)
- Includes 1 liter capsule with two 3" fill/access openings
- Suitable for use on all types of Natural Gas and Propane appliances
- Helps maintain a neutral environment for bacteria in septic systems
- Made of corrosion resistant materials
- Includes initial charge of neutralizing agent
- Extended bottom flange
- Fast and easy installation
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 15 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 15 in. L; Minimum recommended bend radius: 2.5 in.
- Sweat x FIP connections
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
The Camco flared dip tube is a non-metallic tube that directs incoming cold water into a water heater. It directs water to the bottom of the tank so that the water in the upper part of the tank will stay warm. It can be cut to desired length if too long. The gasket is included.
- Water inlet dip tube
- 52 in. vertical length
- Can be cut to desired length
- Gasket included
- No-break poly resin
- PEX material
- Directs cold water to the bottom of the water heater
- Flared opening
- Non-metallic
- Anti-siphon hole breaks damaging siphon action
2 in. flex vent kit that extends 35 ft. It is compatible with EZ98DV, EZ111DV and EZTR40 tankless models. This kit is intended for installation through an existing B-vent. It contains a step by step start up guide. EZ2-CK flex vent conversion kit must also be purchased to ensure proper installation. EZ2-CK must be purchased in order to properly install this flex vent kit.
- EZ2-CK must also be purchased for proper installation
- Kit is only for vertical terminations
- Optional venting for EZ series heaters
- Flexible polypropylene venting included
- Additional accessories to complete the venting application
- Flex vent is up to 35 ft.
- Easy to install
- Contains rain cap
- Not allowable for horizontal terminations
- Vent through existing B-vent
- Designed only for installation inside of B-vent wall
- Cannot be installed outdoors
- Compatible with EZ98DV, EZ111DV, and EZTR40 models
Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to 8 tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.
- Roof flashing - shingle 6/12 in. to 12/12 in. pitch
- For use with Rinnai tankless water heaters
- Dimensions: 5.5 in. x 17 in. x 13 in.
- Water heater accessory
- Country of origin: Netherlands
- Tankless water heaters (condensing) and M-series boilers
- Black finish
- Package quantity: 1
- 1-year limited warranty
- *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.
The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.
- Direct replacement for Rheem, Ruud and Richmond gas water heaters
- Works on models: PROG50-42N RH67 PV
- Kit includes: gas valve and instructions
- Use only on Rheem water heaters
- Genuine OEM replacement kit
- Robust design
- Made of steel and plastic
- Repair your water heater with peace of mind using genuine Rheem parts
- 1 year limited warranty
- California residents see prop 65 warnings
This Camouflage Collapsible Bucket is the perfect size for RVing, camping, fishing, boating, and more. It has a 3 Gal. capacity. Opens easily to 9.25 in. tall and folds to less than 2 in. for compact storage. Zippered storage bag included.
- Camouflage print
- Watertight PVC coated Oxford fabric
- Compact for use in tight spaces
- Great for plumbers
- Storage case included
- Patented design
- Folds down to 2 in. H for storage
- Opens easily to 9.5 in. tall
- Sides of the bucket will be held up by the pressure of the water when full
The SharkBite Heat guard 110-D is a Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 120° F maximum. The Heat guard 110-D is designed to assist in the prevention of scalding. The SharkBite Heat guard 110-D valve delivers water at a maximum of 120° F, allowing the heater to be set at 140° F or higher, thus providing a greater effective volume of hot water.
- Instant push-fit connection for increased ease of use
- No soldering, glue or tools required
- Allows the heater to be set at 140°F or higher allowing for greater effective hot water volume and less chance of legionella within the cylinder
- Robust, low complexity construction means superior reliability and improved user safety
- Delivering hot water at a controlled temperature
- Lead free
The 3/4" DUXLM Dielectric Union Pipe Fitting with is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the 3/4" DUXLM include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The 3/4" DUXLM comes standard with a male iron pipe x female copper sweat joint.
- Flexible design couples dissimilar piping materials for ultimate convenience
- Designed for lasting wear on potable water applications
- Protects against pipe deterioration from galvanic and stray current corrosion
- Zinc-coated steel body resists corrosion
- Male iron pipe x female copper sweat
- Union nut steel with zinc coat
- Tailpiece low lead brass
- Bolts and nuts steel with zinc coat
- Insulator nylon
- Certified to NSF/ANSI 372 by IAPMO R and T
Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to eight tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.
- Concentric venting reduces install time and costs
- Engineered concentric venting especially for gas appliances
- Easy assembly/adjustment
- Concentric venting allows for secure connection
- 5 in. condensing horizontal termination kit 21 in
- HE series tankless water heaters (Condensing)
- White finish
- Package quantity: 1
- Plastic construction
- 1-year limited warranty
- *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.
Superior full port potable water connectors for water heaters and water treatment. Connectors are more bendable and flexible than copper. They will not discolor, corrode, rust, crimp or kink.
- Extremely flexible
- Lifetime warranty
- Flows approximately 135% more than braided type
- Perfect for water heaters, both tankless and storage type
- Kink and crimp free
- Chrome plated brass nuts
- Bright annealed
- Will not corrode or rust
- No Dielectric union required
- Resists work hardening
- Working pressure 200 psi
- Burst pressure approximately 1850 psi
- No sweat installation
- Bright annealed
Upper T-Stat with High Limit 2-Elements, 1-19/32" X 3-27/32".
- Kit Contains Two 18" Water Connectors, Two 3/4" Dielectric Nipples, One Teflon Tape and Two 7/8" OD X 3/4" Mip Compression Adapters
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- FIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel