Pump Parts & Accessories
Detectable 5 mil Underground Marking Tape, 3" x 1000' GAS
- Aluminum foil alerts about buried installation below
- Designed to identify, protect, and locate buried lines
- Black letters and colored background for clear visibility
- Designed for open trench applications
The sump pump check valve is installed in the discharge pipe in sump pump applications. The internal check valve keeps pump fluid from flowing back into the sump basin. Includes Stainless Steel hose clamps.
- Full port valve design
- Flapper is seated on a 15 degree angle to reduce water hammer when pump is shut off
- Design of the flapper prevents debris from building up or getting caught which ensures proper seating
- Made of durable ABS
- Maximum temperature 140 degree F (60 degree C)
This air valve provides a method of injecting and holding air pressure in water systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines. It is a general purpose valve.
- General purpose - 1/4 in. MPT tank valve
- Working pressure 0-200 psi
- Working temperature -40 degree F to +225 degree F
- Opening pressure 60 psi
- Lead free
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
- Pressure connection: 1/4 in. NPSF, pressure setting 40-60
- Adjustable cut in/out: cut out range 20-65 psig
This air valve provides a method of injecting and holding air pressure in water systems. It is used for shallow and deep well pump systems. Other uses include pressurizing piping systems for pressure test and blowing out irrigation lines.
- 1/8 in. MPT for water pumps
- Working pressure 15-150 PSI
- Working temperature: -10 degree F to + 165 degree F
- Opening pressure 3 psi
- Manufactured with light spring required for shallow well pump and bleeder systems
- Lead Free
- 1/4" MNPT
- 2" Face
- 3/4" solid steel plate door
- 10 3/4" x 11 1/8" door opening
- Three 1" diameter locking bolts
- Heavy duty dead bar behind hinge
- Doors are removable and interchangeable
- Carpeted interior floor
- Textured black finish
- 12 3/4"H x 14 1/8"W x 11 3/4"D
- 102 lbs.
- Made from high-quality steel for enhanced durability
- Heavy-duty dead bar prevents door removal during a forced entry attempt
- Three 1 in. Dia locking bolts help avert loosening
- Textured black finish offers an elegant appeal
- Fits 1" Or 1-1/4" Drop Pipe
- Comes with 2 Stainless Steel Clamps
- Made Of Deluxe Natural Rubber
Leonard Lvc Thermostatic Assembly Less Cover & Pointer
- Includes all necessary hardware for hassle-free installation
- Sturdy stainless steel build ensures durability
- Brass finish adds an attractive aesthetic appeal
- Restores system to efficient performance
Leonard Control Rod Group Pam-11 Pv-Cr
- Bronze build provides durability
- Ideal for repairing PAM-II-ST old style thermostatic valve
- Resists corrosion to ensure safety and reliability
- Restores system to efficient performance
This deep well air volume control prevents tanks from becoming air bound by maintaining proper air volume. Float operation open the air valve on water level drop (increase in tank air) and permits air to bleed from the tank to the atmosphere as the tank refills. Has a durable plastic housing with sealed plastic float, stainless steel rod and hardware.
- Deep well air volume control
- 1-1/4 in. MPT tank connection
- Durable plastic housing with sealed plastic float, stainless steel rod and hardware
- Housing is tapped with a 1/4 in. FPT pressure gauge port
Leonard Lvc Checkstop Repair Kit
- Includes all necessary hardware for easy repair
- Sturdy stainless steel build ensures durability
- Resists corrosion to ensure safety and reliability
- Restores system to efficient performance
Its hollow core provides a high knot retention and is easy to splice. The fiber is treated with UV stabilizers for sunlight durability. Floats on water, retains strength when wet and may be stored wet without damage.
- Floats on water, retains strength when wet and may be stored wet without damage
- High resistance to abrasion, mildew, oil, grease, gasoline, marine growth and many chemicals
- Best for tie-downs, utility hand lines, pulling lines, ladder lines and marine uses
- Lightweight flexibility
- 100% monofilament fibers
Standard water pump switch designed for the control of electrically driven water pumps of all types. Pressure setting: Cut-n 30, Cut-out 50
- Temperature Ambient: Min. -30C (-22F) Max. 70C (158F)
- Temperature Media: Min. -30C (-22F) Max. 125C (257F)
- Standard action contacts open on rising pressure
- Enclosure Type 1 Indoor use
- Individually Boxed
- UL Approved
- CSA approved
- LEAD FREE
- Tank connection: 1" MPT
- In-line connection: 1" MPT x 3/4" FPT
- Centre end length: 10"
- Drain/relief ports: (2) 1/2"
- Accessory ports: (2) 1/4"
- Lead free
- Stops Backflow Of Sump Pump Or Sewage Ejectors
- Adapts Easily For Use with All Piping Materials
- Made From ABS Thermoplastic
