Powder Actuated Tool Accessories
Ramset Drive Pins are designed for fastening applications in concrete and steel. They are specifically fabricated for toughness and durability and are able to penetrate dense concrete and structural quality steel. Recommended applications include 2 ft. x 4 ft. framing, attaching electrical boxes and installing drywall track and plywood sub-flooring.
- Use with Ramset powder actuated tools for fastening applications in concrete and steel
- For attaching 1/4 in. and 1/2 in. plywood to concrete
- Tough, durable pins are able to penetrate dense concrete and structural-quality steel
- Washer increases bearing surface against material to be fastened
Ramset Drive Pins are designed for fastening applications in concrete and steel. They are specifically fabricated for toughness and durability and are able to penetrate dense concrete and structural quality steel. Ramset assures consistent, optimum quality in every fastener.
- Use with Ramset powder actuated tools for fastening applications in concrete and steel
- Attaching 2 ft. x 4 ft. to concrete
- Durable design
- Includes 100-pins
Ramset Drive Pins are designed for fastening applications in concrete and steel. They are specifically fabricated for toughness and durability and are able to penetrate dense concrete and structural quality steel. Ramset assures consistent, optimum quality in every fastener.
- Designed for fastening material to concrete or thin gauge steel
- Compatible with Ramset powder actuated tools
- Includes washers, which help increase the bearing surface
- Fabricated for durability
- Building code approved
- Available with or without washers in a full range of sizes
Washer increases bearing surface against the material to be fastened
- For Fastening Into Concrete, Steel Or Masonry with powder Actuated Tools
- Shank length: 1-1/2"
- Washer size: 7/8"
- .300 Headed, .144 Shank Diameter
Ramset Drive Pins are designed for fastening applications in concrete and steel. They are specifically fabricated for toughness and durability and are able to penetrate dense concrete and structural quality steel. Ramset assures consistent, optimum quality in every fastener.
- For use with Ramset powder actuated tools for fastening applications in concrete and steel
- For attaching 2 ft. x 4 ft. to concrete
- Washer increases bearing surface against material to be fastened
- Durable design
- Includes 100 pins and washers
Ramset powder loads provide quality performance and the power to penetrate hollow block and concrete. Use Ramset 0.22 Caliber Brown Single-Shot Powder Loads (100-Pack) with the Ramset 721, M70, TriggerShot, MasterShot and Hammers hot tools. Ramset assures consistent, optimum quality in every load.
- Ramset
- Help provide the power to penetrate hollow block and concrete
- Highest quality powder loads
- Includes 100-loads
Ramset powder loads provide the powerful, consistent performance required to penetrate hollow brick and concrete. The 0.22 Caliber Green Single Shot Powder Loads (100-Pack) are compatible with the Ramset 721, M70, MasterShot, TriggerShot and Hammers hot tools. Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases. The 0.22 Caliber Green Loads are power level 3.
- Designed for use with the Ramset 721, M70, master shot, trigger shot and hammer shot tools
- Penetrates hollow block and concrete
- Green booster color
- Highest quality powder loads
- Complete burn keeps the tool clean
- 100-loads per box
Designed for use in concrete and structural steel applications
- For Fastening Into Concrete, Steel Or Masonry with powder Actuated Tools
- Shank length: 2"
- .300 Headed, .144 Shank Diameter
Ramset powder loads and tools match tolerances to provide optimum powder within recognized national velocity standards. The powder level of the load is indicated by the number marked on each box, the color of the box, and the color on the tip of each load. As the number increases, the powder level also increases.
- Acceptable base materials: poured concrete, structural steel, masonry joints
- Unacceptable base materials: very hard or brittle materials (Fastening into cast iron, tile, glass, or rock of any kind can cause these materials to shatter, causing the fastener and/or base material to fly free) and soft materials (Fastening into drywall or lumber can cause the fastener to travel completely through the base material and out the other side)
- 0.22 single caliber
- Low velocity
- Powder level 4
- Yellow
- Overall product weight: 0.19 lbs.
Arm your Ramset 721, M70, MasterShot, TriggerShot or HammerShot tool with the Ramset 0.22 Caliber Yellow Single-Shot Powder Loads 100-Count. These loads provide enough power to help penetrate concrete and hollow block. 100 loads per box.
- Use with Ramset 721, M70, MasterShot, TriggerShot and HammerShot tools
- Help provide the power to penetrate hollow block and concrete
- Yellow loads
- Includes 100-loads
- Compatible with most other PAT brands
The Ramset System is designed for quick, easy and permanent fastening to concrete and steel. The powder load fires a hardened steel pin through the item you want to attach and into the substrate. Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level increases.
- Use with Ramset, MasterShot, TriggerShot and HammerShot tools
- Precise powder weighing prevents under or over-packed shots
- Complete powder-burn prevents residue build-up
- Help provide the power to penetrate mortar joints power level 2
- Brown
- 0.22 caliber
- Low velocity
Keep all those loose nuts, screw, bolts and other small parts in 1-place while working on projects with Husky magnetic parts tray. This rectangular steel tray uses 2 powerful magnets to keep both itself securely in place on any magnetic surface as well as any magnetic metal fasteners placed in the bowl from falling out. This magnetic parts tray is perfect for any auto repair work or DIY projects where you need to keep track of nuts, bolts and screws.
- 9 in. x 5 in. stainless steel magnetic parts tray
- Magnet attaches to and keeps metal objects secure
- Rubber coated magnetic base resist scratching surfaces
- Formed from heavy-gauge stainless steel
- Keeps steel parts such as nuts, bolts, screws and drill bits secure even if the tray is knocked over
- Polished surface easily wipes clean of oil and dirt
- Call 1-888-HD-HUSKY for customer service and support.