Lock Repair Tools
This plug follower is structured to be used with the most common brand of cylinders. The applications it can be used for include Acro Lock, Arrow, Corbin, Dexter, Eagle, Ilco, Keil, Kwikset, Lockwood, National, Rockford National, Nesco, Russwin (0.500 Dia), Sargent, Schlage, Taylor, Weiser (except Beverly style), Welch and Yale. It is designed from ground accuracy stock with a corrosion resistant black oxide finish.
- 0.495 Dia
- Fits most all mortise and rim cylinders
- Fashioned from ground accuracy stock
- Corrosion resistant black oxide finish
- Locksmith trusted
- Durable construction
The groove in the tip of the Pin Tumbler Tweezers provides a firm, non-twisting grip on cylinder pins for easy loading
- The tip is also milled back so that the outside diameter of a standard .115" (2.92mm) pin extends past the tip
- This permits the pin to butt up against the end of the plug follower when loading the upper chambers, providing added control when holding top or master pins of varying lengths.
Slides between the vehicle door and the weather stripping on the door frame
- Then the pump is squeezed, inflating the Air Wedge and separating the vehicle door from the frame
- This provides more than ample room to insert a car opening tool
- Made of a sturdy vinyl and equipped with a release valve
- Works exceptionally well with HPC’s Autosleeve (AS 1)
- Typical Pressure: 220 lbs.
- Maximum Pressure: 440 lbs.
- 6.25" x 5.75"
- Thickness, not inflated: 0.08"/2mm
- Thickness, max. inflated: 2.75"/7cm
- Works exceptionally well with HPCs Autosleeve (AS 1)
- The AO42-LA, 58†Long Arm Tool, offers the versatility to unlock a wide range of vehicles
- This versatile tool is designed to enter into the passenger compartment of the vehicle through the door using wedges and/or door jack type tools
- The soft vinyl tip allows for easy lock manipulation
- Full Color Instructions included
- Includes: Small Plug (.398), Corbin (.550), Weslock (.515), Universal (.498) & Schlage (for 3 types of cylinders)
- These followers will do 90% of all cylinders
- Lightweight & durable - white delrin reflects light
The Schlage Key Gauge is designed for detailed measurement of key cuts on any Schlage key. Precisely assess pin sizes and re-key Schlage locks with confidence.
- Key Guage
- Provides detailed measurement of key cuts
- Works on any Schlage Key
- Helps in assessing pin size
Four tools in one: it opens cars, installs doors and windows, holds doors, and opens garage doors
- Like the Original Air Wedge, the Universal Air Wedge is made of a sturdy vinyl and equipped with a bulb pump and release valve for quick and easy inflating and deflating
- 11" x 5.125"
- Thickness, not inflated: 0.08"/2mm
- Thickness, max. inflated: 2.75"/7cm
Pro-Lok Schlage-Kwikset Weiser-Weslock Key Decoder
Spring-loaded rotation
- Automatically reverses direction when lock cylinder is picked in wrong direction to open lock
This versatile follow tool can be used for rekeying on most standard commercial and residential brands of lock hardware
- Used for quick removal of upper-chamber master pins, a quick twist removes and dumps pins
New Cutter for use with the RY20028 or RY456276 Stylus
- Now you can cut keys like GM and Kwikset Titans first cut with one side straight
For use with Arrow, Weiser, Schlage and Schlage Primus cylinders
3 most popular sizes: Small (.395" dia.) Medium (.495" dia.) Large (.550" dia.)
- Case has caps on each end
- Chrome plated hollow brass
- The AO42-LAXL, 76†Extra Length Long Arm Tool, offers the versatility to open a wide range of vehicles
- This versatile tool is designed to enter into the passenger compartment of the vehicle through the door using wedges and/or door jack type tools
- The AO42-LAXL is capable of reaching across the vehicle to manipulate interior lock mechanism
- Full Color Instructions included
- The Extra Long Arm Tool Kit is ideal for depressing the unlock button, accessing the pull handle, lifting the lock button, or retrieving the keys; all as if you were sitting inside the vehicle
- Includes the 76" AO42-LAXL Long Arm Tool, AO65 Inflatable Pump Wedge, AO67 Mini Rubber Wedge and the AO42SL Plastic Protection Sleeve
- 4 piece set
- Lifetime Warranty against manufacturer’s defect
- Lifetime Warranty against manufacturers defect
Removes ball, tulip and standard style knobs for servicing without damaging the lockset
- Perfect when picking is not an option
Includes pin tumbler tweezers (able to grip and hold a .115 diameter pin, and position it against a vertical surface), 2 round files, 2 pippin files and 4 American pattern warding files
- The 58" Long Arm Tool Kit is ideal for depressing the unlock button, accessing the pull handle, lifting the lock button, or retrieving the keys; all as if you were sitting inside the vehicle
- Includes the 58" AO42-LA Long Arm Tool, AO65 Inflatable Pump Wedge, AO67 Mini Rubber Wedge and the AO42SL Plastic Protection Sleeve
- 4 piece set
- Lifetime Warranty against manufacturer’s defect
- Lifetime Warranty against manufacturers defect
Contain: Tools CO-6, CO-10,CO11,CO-18,CO-60,CO-61,CO-70,CO-71,CO-72,CO-73, CO-75 Wedges AW-34, AW-38, Light FAL-15 , Pick set PIP-13, Manual COA-CD
- Complete with durable carrying case
- The Stamp Aligner solves the problems locksmiths have always had while stamping numbers on keys. Crooked numbers, stamps flying across the room, and numbers that go up, down, and all around are now things of the past. The Stamp Aligner holds the stamps so that figures may be stamped on keys in a straight line with even spacing between characters
- The Stamp Aligner has 7 detents to stamp up to 7 characters and 3 rows evenly on a standard key. A key is placed onto the bottom part of the Stamp Aligner and secured in place. The top part of the Stamp Aligner is moved into one of the spacing indexes. The stamp is placed into the square hole, over the spot where the key is to be stamped. The stamp is held securely in place for it to be struck by a hammer. Spacing is clearly defined by a spring-loaded detent built into the device.
- Each character stamped on the key will be straight, spaced evenly, and aligned perfectly. When the stamps are all struck with the same force, the result is a key that looks like it was factory stamped. Letter and Figure Stamps are sold separately
- 25" (6.35mm) square hole fits 1/8" (3mm) and 3/32" (2.5mm) character stamps.