Searched for "40141616"
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
Designed for use on forklift cylinders and other DOT removable cylinders up to 122 lbs. of LP-Gas capacity. The working components of this valve are located inside the tank reducing possible malfunction caused by outside debris or other foreign materials. Note: NFPA #58 states, All containers used in industrial trucks (including fork lift truck cylinders) service shall have the container pressure relief valve replaced by a new or unused valve within 12 years of the date of manufacture of the container and every 10 years thereafter.
- Start-to-discharge setting: 275 psig
- 368 UL flow capacity SCFM/air per CGA S1.1 at 480 psig
- Non-adjustable, tamper resistance design
- 45 and 90 discharge vents available
- Certified to ANSI / NSF standard 61-9 Annex G
- Manufactured in an ISO accredited facility
The CGA 790 quick closing couplings (ME220 Series) are designed to join the carburetion fuel line to the service valve on motor fuel type applications. The Acme threads allow for quick and repeated removal and connection with minimal product loss. The ME220M connects directly to the service valve outlet. Will fit any refill adapter on the market.
- Includes internal safety check
- Knurled body on the fuel line connector and filler valve allows for an easy hand tight connection even under tank pressure
- ME220M has 2 seals an O-ring to minimize product loss during connection and a gasket to seal the 2 connectors during filling operations
- Inlet: 3/8 in. MNPT, outlet: 1-1/4 in. male Acme
- Application: service valve
- Works in conjunction with all mating forklift connectors and filler valves
1-1/4 in. Acme Gasket. For leak free seal. Durable nitrile rubber material.
- Depth: 0.145
- ID: 0.665
- OD: 0.925
- Material: Duro Nitrile / Buna
- Acme gasket
- Color: black
Intended for vapor or liquid withdrawal service on DOT forklift or engine fuel containers. Two closing ow rates are offered - 1.5 GPM for medium to light duty vehicles and 2.6 GPM for those with greater fuel demands. Note: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separate pressure relief valve to adequately handle the containers capacity. Each of these valves incorporate an excess ow valve at the tanks inlet end to prevent excessive product loss in the event of a downstream fuel line failure. For the excess ow device to perform properly the service valve must be in the full open and back seated position.
- Excess flow GPM: 2.6
- 1 piece forged brass body construction
- Dual O-ring packing design
- Easy to repair / replace bonnet assembly
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 20 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 20 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4"
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Designed for dot forklift, engine fuel and ASME residential tanks, these double check filler valves automatically open with pump pressure providing maximum product flow rates. Once flow ceases, both upper and lower check mechanisms close to prevent product loss from the container. The lower check serves as a secondary seat to limit product loss in the event that the primary upper seat fails to operate properly due to damage.
- Industry best flow rate
- Resilient bonded main valve seal
- Integral break away feature leaves primary check intact in the event of delivery truck roll away
- Field repairable upper check seat
Forklift tank valve replacement O-ring. Color is black. UL Listed compound for use with propane.
- I.D. 0.612
- 0.818 in. O.D.
- Material: nitrile/Buna
- Replacement part
- Indicates the maximum filling level
- 1/4" MNPT container connection
- 5.6" dip tube length
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
1-3/4 in. Acme Gasket. for leak free seal. Durable nitrile rubber material.
- Material: nitrile
- Color: black
- O.D. 1.344
- Id: 0.938
- Depth: 0.125 in.
- Replacement part
Plastic yellow acme cap for adapter protection. Rated for LP Gas use only. Chain available separately.
- 1-3/4 in. F Acme
- Color: yellow
- Style: pin hole
- Cap only
- LP gas only
- Dust cap
- 100 LB DOT Service Valve, 3/4" NGT, 10.6" Dip Tube
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Designed to provide a way to visually determine that a tank has reached maximum allowable fill capacity. The dip tube end of a fixed liquid level gauge should be set equal to 80% of the liquid level tank capacity and installed in the vapor space of the tank. The vent valve should be opened before filling begins during which time vapor will be discharged. Once the tank reaches maximum liquid fill capacity (80% of tank capacity), liquid will begin to discharge from the vent valve telling the operator the tank has reached maximum allowable fill capacity and the filling operation should cease immediately.
- 5.4 in. brass dip tube
- #54 orifice
- Fixed liquid level gauge
- UL Listed
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 30 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 30 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 4.7"
Designed to minimize loss of product while allowing the operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide an effective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the Marshall Excelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect.
- Knurled stem that completely unscrews from the valve making the stems replaceable
- #54 orifice with no self-cleaning apparatus
- 1/4 in. MNPT connection
- Material: brass
Intended to protect both internal and external relief valves ranging in size from 3/4 in. to 1-1/4 in. NPT from moisture and/or other possible contaminants. Using the universal shower cap style relief valve covers will allow technicians to carry 2 sizes that will protect the majority of domestic tank relief valves. Adjustable.
- Material: durable UV stable vinyl
- Fits 3/4 in. to 1-1/4 in. NPT internal and external relief valves
- Color: yellow
- Universal
Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
This Type 1 ACME valve (CGA791) is intended for DOT cylinders with 40 pounds LPG capacity. This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD). The brass safety cage surrounds critical welds, providing additional protection to components for long-term operational performance.
- Rapid purging and filling with over one million BTU withdrawal capacity
- Tri-lobular one-piece forged aluminum handwheel
- Double o-ring stem seal for improved leak resistance
- Pre-applied sealant
- Quality o-ring check valve seat; opens only with positive seal
- Cylinder capacity: 40 lbs
- Container Connection: 3/4" 14 NGT
- Outlet Connection: Type 1 ACME and POL
- Relief Setting: 375 PSIG
- Dip Tube: 6.4"
This 1 by 1 in lead free dual check valve prevents the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. The valve consists of a lead free brass body construction, 1 in. NPT threaded female union inlet and 1 in. NPT threaded female outlet, with two plastic replaceable check valves, and stainless steel springs. It is designed for non-health hazard residential water system containment, continuous pressure applications and is to be installed immediately downstream of the residential water meter, in a vertical or horizontal position. The minimum working pressure is 10 psi (69 kPa) and maximum working pressure is 175 psi (12 BAR).
- Lead free brass body for durability
- Can be installed vertically or horizontally
- Compact design
- Meets ANSI/ASSE Standard 1024
- 1 in. union female NPT inlet x female NPT outlet
- Designed for non-health hazard residential water system containment
The ME665 Series Multi-Service Valve is intended for use in vapor withdrawal service for ASME containers or as fuel line shutoff valves in combination with an integral double check vapor equalization valve. 1/8 in. FNPT plugged test port. 3/4 in. inlet MNPT and female POL outlet.
- One piece forged brass body construction
- Dual O-ring packing design
- Plugged test port: ME665 series - 1/8 FNPT
- Universal bonnet assembly
- 12.0 in. diptube
- 3/4 in. MNPT multi-service valve
Liquid Transfer valves and adapters are designed to provide a safe means to transfer liquid or vapor from a storage container. These valves can also be used for temporary liquid withdrawal applications such as emergency evacuations or container relocation. Fully interchangeable with all existing valve models and adapters.
- Brass
- 3/4 FNPT
- 1-5/8 UNF
- Provides excess flow protection in the event of a downstream connection or line failure
- Safety breakaway feature leaves valve seals intact in the event of truck roll-away
- 6-14 psi closing flow pressure differential for maximum product transfer
Liquid Withdrawal Tank Valve with integral excess ow protection. Designed to provide a safe means to transfer liquid or vapor from a storage container. Fully interchangeable with all existing valve models and adapters.
- Provides excess flow protection in the event of a downstream connection or line failure
- Safety breakaway feature leaves valve seals intact in the event of truck roll-away
- 6-14 psig closing flow pressure differential for maximum product transfer
- 3/4 in. MNPT