Searched for "40141700"
Plastic Double-End Extension Tube.Slip Joint Connect. 1-1/2 x 16 in. White plastic.Have Double-ending.
- Extension tube
- Double-end
- 1-1/2 in. . length, 16 in. double split
- White
- Slip joint
- Pipe material ploy
1-1/2 in. x 16 in. Sink Tailpiece.PP Material.Double-Flange Direct Connect.Sink tailpiece.
- Sink tailpiece
- PP material
- 1-1/2 in. x 16 in.
- Double-flange
- CUPC approval
- White
Flanged 1-1/2 in. x Length 8 in. Plastic Sink Tailpiece.No Flexible tube.Color: White.Have cUPC approval.
- Flanged. 1-1/2 in.
- Length: 8 in.
- Sink tailpiece
- White
- Pipe material poly
- Tailpiece type other
1-1/2 in. x 12 in. Sink tailpiece. PVC construction. Flanged direct connect.
- Sink tailpiece
- PVC material
- 1-1/2 in. x 12 in.
- cUPC approval
- Flanged direct connect
- White
1-1/2 in. x 6 in. Sink Tailpiece. PP Material White Color. Exclusive Brand products from Barnett and The Home Depot.
- Sink tailpiece
- Size 1-1/2 in. x 6 in.
- PP
- White
- CUPC approved
- Direct connect
1-1/2 in. x16 in. End Outlet Waste. Exclusive Brand products. Combination Direct Connect or Slip Joint.
- End outlet waste
- Exclusive products
- Slip joint
- Pipe material poly
- Size is 1-1/2 in. x 16 in.
- PP
1-1/2 in. x 12 in. Extension Tube. Slip Joint Connect. PP Material White Color.
- Extension tube type
- Slip joint
- 1-1/2 in. x 12in.
- Polypropylene
- White
- cUPC approval
Contains Extension Tube and Slip Joint Connection. Made of PP Material. White in Color. cUPC approved product.
- Extension tube
- 1-1/2 in. x 6 in.
- Slip joint
- PP
- White
- cUPC approval
This fitting includes a split ring and a stainless steel insert. it is also self-flaring, which means no flaring tool is needed. *MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Threaded to ensure a secure fit
- Withstands up to 150 PSI pressure to deliver optimum performance
- Malleable to allow for customized use
- Compatible with schedule 40 pipe and pipe nipples
1-1/4 in. x 6 in. Extension Tube. Slip Joint Connect. PP Material White Color.
- Durapro slip joint
- PP
- White
- cUPC approval
- 1-1/4 in. x 6 in.
- Extension tube
Slip Joint. Plastic. 1-1/2 in. x 16 in.
- PP material
- Slip joint connection
- cUPC approved
- Opening with 1-1/2 in.
- Length with 16 in.
- With nuts and washers
This self-flaring fitting does not require a flaring tool. It includes a split ring. It must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes.
- Autoflare fitting
- 3/4 in.
- Solid brass fitting
- Stainless steel insert
Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65° F to +250° F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73° F working temperature
- Temperature range of -65° F to +250° F
- Not for potable water
Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 3/4 in. MPT x 3/4 in. IPS, SDR 11 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
Made of PE Material. Szie 1-1/2 in. X12 in. Flexible Extension Tube.Slip Joint connection.
- PE
- SIZE: 1-1/2 in. X12 in.
- Flexible extension tube
- Slip joint
- With nut
- Wish washer
1-1/2 in. x 8 in. x 3/4 in.Dishwasher Tailpiece.Direct-Connect.Have cUPC approval.PP Material.
- Plastic
- Size with 1-1/2 in. x 8 in.
- With 3/4 in. branch
- White
- Direct connect
- cUPC approval
PE Material. 1-1/4 in. X9 in. Flexible Extension Tube. Slip Joint.
- PE material
- SIZE: 1-1/4 in. X9 in.
- Flexible extension tube
- Slip joint
- With nut
- With washer
Plastic Center Outlet Waste.Slip Joint To Tailpiece Or Direct Connect To Strainers, 1-1/2 in. OD x 16 in. with Baffle. PP Material.Have cUPC approval.
- Center outlet waste
- Slip joint
- 1-1/2 in. OD x 16 in.
- PP
- With Baffle
- White
- 3/4" IPS
- SDR 11
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Plastic Waste Arm.The size is 1-1/2 in. x 15 in.Exclusive Brand products.Have cUPC approval.
- Waste arm
- 1-1/2 in. x 15in.
- Exclusive products
- White
- CUPC approved
- Slip joint extension tube
Chicago Fittings X-Riser Service Head Adapter-Anode-less Full Flex Riser, 1/2 in. MPT x 1/2 in. CTS, SDR 7 x 36 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
Telescope End Outlet Waste with Branch.Adjustable from 11 in. -17 in.Slip Joint Connect end outlet waste.PP white color.
- End outlet waste
- With branch
- Slip joint
- Adjustable 11 in. -17 in.
- PP
- White
- NFPA-58 approved
- Moisture seal attached at tail end
- Internal plastic liner to protect the PE
- MIP X POLY: 3/4" MIP x 3/4" IPS
- 36"L
- SDR 11
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- NFPA-58 approved
- Moisture seal attached at tail end
- Internal plastic liner to protect the PE
- MIP X POLY: 1/2" MIP x 1/2" CTS
- 36"L
- .090" WALL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES