Searched for "40141700"
Plastic Double-End Extension Tube.Slip Joint Connect. 1-1/2 x 16 in. White plastic.Have Double-ending.
- Extension tube
- Double-end
- 1-1/2 in. . length, 16 in. double split
- White
- Slip joint
- Pipe material ploy
1-1/2 in. x 16 in. Sink Tailpiece.PP Material.Double-Flange Direct Connect.Sink tailpiece.
- Sink tailpiece
- PP material
- 1-1/2 in. x 16 in.
- Double-flange
- CUPC approval
- White
1-1/2 in. x16 in. End Outlet Waste. Exclusive Brand products. Combination Direct Connect or Slip Joint.
- End outlet waste
- Exclusive products
- Slip joint
- Pipe material poly
- Size is 1-1/2 in. x 16 in.
- PP
Extension Tube.Made of PVC Material.SIZE: 1-1/2 in. X12 in.With Solvent Weld Connection.Easy to use. Solvent weld Conncestion.
- Extension tube
- PVC
- White
- Size: 1-1/2 in. x12 in.
- Solvent weld
- Connection
1-1/4 in. x 6 in. Extension Tube. Slip Joint Connect. PP Material White Color.
- Durapro slip joint
- PP
- White
- cUPC approval
- 1-1/4 in. x 6 in.
- Extension tube
1-1/2 in. x 12 in. Sink tailpiece. PVC construction. Flanged direct connect.
- Sink tailpiece
- PVC material
- 1-1/2 in. x 12 in.
- cUPC approval
- Flanged direct connect
- White
Contains Extension Tube and Slip Joint Connection. Made of PP Material. White in Color. cUPC approved product.
- Extension tube
- 1-1/2 in. x 6 in.
- Slip joint
- PP
- White
- cUPC approval
1-1/2 in. x 12 in. Extension Tube. Slip Joint Connect. PP Material White Color.
- Extension tube type
- Slip joint
- 1-1/2 in. x 12in.
- Polypropylene
- White
- cUPC approval
Flanged 1-1/2 in. x Length 8 in. Plastic Sink Tailpiece.No Flexible tube.Color: White.Have cUPC approval.
- Flanged. 1-1/2 in.
- Length: 8 in.
- Sink tailpiece
- White
- Pipe material poly
- Tailpiece type other
- NFPA-58 approved
- Moisture seal attached at tail end
- Internal plastic liner to protect the PE
- MIP X POLY: 3/4" MIP x 3/4" IPS
- 36"L
- SDR 11
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Plastic Center Outlet Waste.Slip Joint To Tailpiece Or Direct Connect To Strainers, 1-1/2 in. OD x 16 in. with Baffle. PP Material.Have cUPC approval.
- Center outlet waste
- Slip joint
- 1-1/2 in. OD x 16 in.
- PP
- With Baffle
- White
1-1/2 in. x 6 in. Sink Tailpiece. PP Material White Color. Exclusive Brand products from Barnett and The Home Depot.
- Sink tailpiece
- Size 1-1/2 in. x 6 in.
- PP
- White
- CUPC approved
- Direct connect
This fitting includes a split ring and a stainless steel insert. it is also self-flaring, which means no flaring tool is needed. *MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Typical Application - LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering, hydraulic and pneumatic systems. Good vibration resistance. Temperature Range of -65° F to +250° F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73° F working temperature
- Temperature range of -65° F to +250° F
- Not for potable water
This self-flaring fitting does not require a flaring tool. It includes a split ring. It must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes.
- Autoflare fitting
- 3/4 in.
- Solid brass fitting
- Stainless steel insert
For use on fuel, oil, LP and natural gas lines and systems. Connects with aluminum, copper, brass and welded steel tubing that can be flared. Recommended for higher pressures than those covered by compression fittings.
- Withstand temperatures 212 degree F
- Pressure up to 640 psi
- 1-year warranty against defect
- Flare
- Forged brass
- Cap
- AutoSnap straight fittings are the only CSST fittings that do not require any disassembly or reassemly of the fitting to the TracPipe CounterStrike CSST
- Greatly reduces installation difficulty and time
- No small loose gaskets, o-rings or retainer rings
- CSA listed
- Features metal to metal cup seal
- Reduced torque value
- Reusable. Twist. Snap. Tighten. Done.
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- NFPA-58 approved
- Moisture seal attached at tail end
- Internal plastic liner to protect the PE
- MIP X POLY: 1/2" MIP x 1/2" CTS
- 36"L
- .090" WALL
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73° working temperature
- Temperature range -65°F to +250°F
- Not for potable water
1-1/2 in. x 8 in. x 3/4 in.Dishwasher Tailpiece.Direct-Connect.Have cUPC approval.PP Material.
- Plastic
- Size with 1-1/2 in. x 8 in.
- With 3/4 in. branch
- White
- Direct connect
- cUPC approval
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Slip Joint. Plastic. 1-1/2 in. x 16 in.
- PP material
- Slip joint connection
- cUPC approved
- Opening with 1-1/2 in.
- Length with 16 in.
- With nuts and washers
- 3/4" IPS
- SDR 11
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
1-1/2 in. x 4 in. PP. Sink Tailpiece.
- Plastic
- Size with 1-1/2 in.
- Direct connect
- With 4 in. length
- White
- cUPC approval