Searched for "40142000"
Full Flow. Pol X 1/4" Barb with 7/8" Hex Nut. MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Male POL x Hose Barb fitting
- Heavy duty brass construction
- Hard Nose POL
- Hose ID: 1/4"
Flexible thermoplastic UL and CGA approved hose. The MER613 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- cULus listed for lengths up to 60 in.
- 3/8 in. female flare swivel connections
- 400,000 BTU capacity
- Flexible thermoplastic UL and CGA approved hose
- 1" Length
- For 1/4" rubber hose. Ferrule reference # 7328. Hole Size (pierce) .437". Ferrule Inside diameter .656"
- Cut hose cleanly and squarely to length
- Barb size is hose I.D.
- Excellent vibration resistance
- Temperature and Working Pressure Ranges From -40°F to +160°F at 150 Maximum PSI
Flexible thermoplastic UL and CGA approved hose. The MER613 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- cULus listed for lengths up to 60 in.
- 3/8 in. female flare swivel connections
- 400,000 BTU capacity
- Flexible thermoplastic UL and CGA approved hose
- 4 ft. L
Flexible thermoplastic UL and CGA approved hose. The MER613 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- cULus listed for lengths up to 60 in.
- 3/8 in. female flare swivel connections
- 400,000 BTU capacity
- Flexible thermoplastic
- 12 ft. L
- 3/8 in. hose I.D.
The RV Thermo Pigtail (Type I ACME) provides a safe, user-friendly connection from your Marshall Excelsior MEGR-253/253H regulator to a standard LP gas cylinder without the use of a wrench. The easy to tighten nylon nut swivels on a connector fitting that is heat sensitive. Inside the brass nipple is a flow-limiting device designed to sense excess gas flow. If excessive gas flow is detected, the RV Thermo Pigtail will shut down the flow to a maximum of 10 SCFH (by-pass flow).
- Note: MEC Green type I nut for use on RV application only (200,000 BTU per hour)
- Between 240 degree F and 300 degree F the brass nipple displaces (approximately 1/4 in.) closing the cylinder valve module and stopping the flow of gas from the container
- Red female QCC, type I x 1/4 in. MNPT
- Flexible thermoplastic UL and CGA approved hose
- 15 in. hose length
Flexible thermoplastic UL and CGA approved hose. The MER613 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- cULus listed for lengths up to 60 in.
- 3/8 in. female flare swivel connections
- 400,000 BTU capacity
- Flexible thermoplastic UL and CGA approved hose
- 3 ft. L
3/8 in. Female Flare Swivel and 3/8 in. Female Flare Swivel connections. These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- Hoses are great for RV LP gas applications
- 3/8 in. hose I.D.
- 12 in. L
- Flexible thermoplastic UL and CGA approved hose
Flexible thermoplastic UL and CGA approved hose. These hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. WARNING: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Hoses are suitable for high or low pressure applications
- 1/4 in. hose I.D.
- FF swivel x FF swivel
- Flexible thermoplastic UL and CGA approved hose
- 6 ft. hose length
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- cULus listed for lengths up to 60 in.
- 1/4 in. hose I.D.
- Use on 2 bottle systems with 2-stage automatic changeover regulators or regulators with T-checks
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- cULus listed for lengths up to 60 in.
- 1/4 in. hose I.D.
- Use on 2 bottle systems with 2-stage automatic changeover regulators or regulators with T-checks
- Flexible thermoplastic UL and CGA approved hose
This 60 in. hose connector is used to connect Regulators to BBQ Grills, Camp Stoves, Patio Heaters and Other Appliances using LPG. For High or Low pressure. Ready to Install.
- 1/4 in. I.D. hose
- Thermoplastic hose
- 60 in. L
- 350 psi maximum working pressure
- 3/8 in. MNPT x 3/8 in. swivel f flare fittings
- UL listed
Designed to provide convenient quick connect and disconnect for low pressure gas appliances with 100% positive gas shut off at female coupler end of the connection. Maximum operating pressure 1/2 psig. For indoor and outdoor applications.
- 1-piece coupler body
- Approved for all low-pressure gas applications
- Convenient wrench flats for securing connection points
- Durable all brass construction
The MER613 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. WARNING: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- cULus listed for lengths up to 60 in.
- 3/8 in. female flare swivel connections
- 400,000 BTU capacity
- Flexible thermoplastic UL and CGA approved hose
Flexible thermoplastic UL and CGA approved hose. The MER613 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- cULus listed for lengths up to 60 in.
- 3/8 in. female flare swivel connections
- 400,000 BTU capacity
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- cULus listed for lengths up to 60 in.
- 1/4 in. hose I.D.
- Use on 2 bottle systems with 2-stage automatic changeover regulators or regulators with T-checks
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Male hard nose POL (7/8 in. nut) x 1/4 in. male inverted flare
- 1/4 in. hose I.D.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
The RV Thermo Pigtail (Type I ACME) provides a safe, user-friendly connection from your Marshall Excelsior MEGR-253/253H regulator to a standard LP gas cylinder without the use of a wrench. The easy to tighten nylon nut swivels on a connector fitting that is heat sensitive. Inside the brass nipple is a flow-limiting device designed to sense excess gas flow. If excessive gas flow is detected, the RV Thermo Pigtail will shut down the flow to a maximum of 10 SCFH (by-pass flow).
- Note: MEC Green type I nut for use on RV application only (200,000 BTU per hour)
- Between 240 degree F and 300 degree F the brass nipple displaces (approximately 1/4 in.) closing the cylinder valve module and stopping the flow of gas from the container
- 20 in. L
- Flexible thermoplastic UL and CGA approved hose
Flexible thermoplastic UL and CGA approved hose. The MER413 Series is rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- Hoses are suitable for high or low pressure applications
- 1/4 in. hose I.D.
- FF swivel x FF swivel
- Flexible thermoplastic UL and CGA approved hose
- 5 ft. hose length
Flexible thermoplastic UL and CGA approved hose. The MER413 Series hoses are rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- Hoses are suitable for high or low pressure applications
- 1/4 in. hose I.D.
- FF swivel x FF swivel
- Flexible thermoplastic
- 12 ft. L
3/8 in. Female Flare Swivel and 3/8 in. Female Flare Swivel connections. These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- Hoses are great for RV LP gas applications
- 3/8 in. hose I.D.
- 96 in. L
- Flexible thermoplastic UL and CGA approved hose
When you choose this lead-free compression fitting for your project, you'll have the benefit of a fitting that is manufactured to the highest standards and tolerances. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
- Durable
- Lead-free
- Threads manufactured to highest-quality standards and tolerances
- Easy to use
- Not for underground use
- Material: brass
3/8 in. Female Flare Swivel and 3/8 in. Female Flare Swivel connections. These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules.
- Hoses are great for RV LP gas applications
- 3/8 in. hose I.D
- 12 in. L
- Flexible thermoplastic UL and CGA approved hose
Secure Seal Adapter. 1/4 in. QC x 1/4 in. SAE 90 degree. All brass adapter.
- Secure seal adapter
- 1/4 in. QC x 1/4 in. SAE 90 degree
- UL for R410A
- Solid brass
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose I.D.
- cULus listed for lengths up to 60 in.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Male hard nose POL (7/8 in. nut) x 1/4 in. male inverted flare
- 1/4 in. hose I.D.
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
Marshall Excelsior ME496 propane cylinder adapter. 1/4 in. Hose Barb x 1 in. 20 Male Swivel with Valve Stem and O-ring. Solid brass construction.
- Durable construction
- Good quality
- Barbed fitting for a tight seal on hoses
- Brass for corrosion resistance, ductility at high temperatures and low magnetic permeability
This 24 in. hose connector is used to connect Regulators to BBQ Grills, Camp Stoves, Patio Heaters and Other Appliances using LPG. For Very High or Low pressure. Ready to Install.
- To connect regulators to BBQ grills, camp stoves, patio heaters and other low pressure appliances using LPG
- Thermoplastic hose 350 psi maximum working pressure
- 24 in. L x 3/8 in. MNPT x 3/8 in. swivel flare fittings
- UL listed
This 30 in. hose connector is used to connect Regulators to BBQ Grills, Camp Stoves, Patio Heaters and Other Appliances using LPG. For High or Low pressure. Ready to Install.
- 1/4 in. I.D. hose
- Thermoplastic hose
- 30 in. L
- 350 psi maximum working pressure
- 3/8 in. MNPT x 3/8 in. swivel f flare fittings
- UL listed
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose I.D.
- Compatibility: high pressure cylinders and regulators
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
These hoses are rated up to 350 psi working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. WARNING: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose id
- Compatibility: high pressure cylinders and regulators
- M POL x male inverted flare
- Flexible thermoplastic UL and CGA approved hose
Use with existing charging hose. Immediately traps refrigerant discharge from hose when disconnected from access fitting to reduce loss of refrigerant and prevent in.finger burn in.. Replacement parts available.
- 1/4 in. QC x 1/4 in. SAE
- Secure seal apadter
- UL for R410A
- Solid brass
When you choose this lead-free compression fitting for your project, you'll have the benefit of a fitting that is manufactured to the highest standards and tolerances. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
- Durable
- Lead-free
- All threads manufactured to highest quality standards and tolerances
- Easy to use
- Not for underground use
- Material
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose I.D.
- cULus listed for lengths up to 60 in.
- Great for RV LP gas applications
- Flexible thermoplastic UL and CGA approved hose
Adapts standard refillable cylinders to a propane hose with a 1/4 in. FNPT connection. Inside is a nylon bushing and O-ring to seal to the nipple on disposable propane cylinder fittings or appliances. This quality gas connection fitting will make any Job easier to complete. Great for 1 lb. tanks.
- Outlet: 1/4 in. MNPT
- Inlet: 1 in. -20 male
- Inside is a check/safety valve
- Durable construction
The ME1654AH Soft-Nose POL Adapter is machined of solid brass (excluding the plastic hand wheel). The 1/4 MNPT fits the inlet of all standard low-pressure regulators. Requires a wrench.
- Caution: do not use soft-nose POLs in any installation where extreme vibration is present replace O-ring
- Full flow
- Hex hand wheel
- Durable all brass construction
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- 1/4 in. hose I.D.
- Compatibility: high pressure cylinders and regulators
- Tank connection: POL
- Flexible thermoplastic UL and CGA approved hose
SF3813 Features a heavy-duty all brass holder with a textured grip. The brass cap is a valve core wrench tool. SF3813 comes with (3) valve cores. The valve cores are stainless steel and brass and are rated for CFC, HCFC and HFC refrigerants. The cores are pressure rated for R410A and manufactured to ARI 720-97 standard.
- Holds 3 cores
- Brass construction
- 3 in. L
- Cores manufactured per ARI 720-97
Core Removal Tool with access port. Specifically designed to valve off the system to remove valve cores, this core remover has a access port. The valve core can be completely removed and replaced without losing system charge.
- Removing valve core without losing system charge
- Quick connect 1/4 in., flare run 1/4 in., side port 1/4 in.
- Features a quarter turn ball valve shut-off fitting and o-ring seals
- Speed up evacuation, recovery, or recharging time through the full flow port
Flexible thermoplastic UL and CGA approved hose. The MER413 Series is rated up to 350 PSIG working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. WARNING: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
- Hoses are suitable for high or low pressure applications
- 1/4 in. hose I.D.
- 2 ft. hose length
- UL and CGA approved hose
The ME492 appliance adapter is machined of solid brass. The 1/4 female pipe fitting allows a camping appliance to be adapted to a larger bulk cylinder instead of the smaller disposable LP gas cylinder. The male 1-20 threaded end of the adapter fits all standard camping appliance regulator inlets, such as camp stoves, lanterns or portable heaters.
- Inlet: 1/4 FNPT with O-ring
- Outlet: 1-20 male - no check
- Good quality
- Camping fitting
- Solid brass
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability