Searched for "49241700"
Due to state regulations this item is not available in California.
Century Square Flange Pool Filter Motor - Two Compartment - High Service Factor (Full Rated)
- 1 HP
- 115 / 208 - 230 Volts
- 3450 RPM
- 16.0 - 8.0 Max Amps
- Counter Clockwise Rotation
- 48Y Frame
- Sealed Ball Bearings
- Motor Length: 11-7/8"
- 1.65 Service Factor
- 1.65 THP
- Auto Protector
- 50 degree C Ambient
- Class "B" Insulation
- 60 Hz
- Capacitor Start
- Open Dripproof
- 303 Stainless steel threaded shaft
Swimming pools and spa tools stay neat and organized with the Pool Tool Organizer. Made from weather-resistant polypropylene material, the assembled organizer holds up to 90 lbs. of pool gear. Rakes, brushes, poles, skimmers and vacuum heads stay off the ground and ready to use. The Pool Tool Organizer assembles in minutes and mounts directly to any hard surface. It can also be assembled with the 2 brackets and hung over any fence up to 1.3 in. W.
- For organizing swimming pool and spa tools and accessories
- All-weather material assembles easily
- Holds up to 90 lbs. of gear
- Mounts to fences or walls - hardware included
- Hangs over fences up to 1.3 in. D
- Includes organizer body, 2 hanging brackets, 3 holding tubes and 3 stainless steel hooks
- Measures approximately 28 in. W x 28.5 in. H (assembled with brackets)
Single Speed Max Rated 2 Horse Power Pool Pump. Voltage Rating 115/230. Quieter, cooler operated heavy-duty motor
- Reliability and performance
- Self-priming capability
- Standard efficient
- Exclusive, swing away hand knobs make strainer cover removal easy with no loose parts
- Easy installation and servicing with quick 4 bolts access to internal components
- Corrosion-proof impeller has smooth, wide openings to prevent fouling or clogging
- Heat-resistant, industrial size ceramic seal is long-wearing and drip proof
- Super-size housing and diffuser ensure rapid priming
- Mounting base provides stable, stress free support, plus versatility for any installation requirement and adapts 48- and 56-frame motors
Durable Construction Of Molded Plastic. Works with Garden Or Automatic Pool Hose. Wheels Swivel For Ease Of Turning On Bottom. Great For Touch-Up Work In Pools Equipped with Automatic Pool Cleaners.
- Wheel Model Leaf Eater
- with Fine Mesh Bag
- additional bags available
- Includes One fine mesh bag
Cleaning your filter is essential for maintaining clean water and ensuring that your pool equipment functions to its peak performance. Regular backwashing allows you to flush dirt and debris that is captured in your filter. Make sure your backwash hose is up to the challenge. This backwash hose is made from thick uv protected vinyl that withstands harsh elements and is chemically resistant. With the 50-ft. Length you can easily direct the dirty filter water away from your pool area. The 2 in. Diameter fits most 2 in. Fittings. Rolls up easily for storage and reuse.
- Maintain a clean swimming pool filter by backwashing dirt and debris that becomes trapped in the filter media; with a 50 ft. reach, you can easily direct your backwashing waste away from your pool, spa or hot tub area
- 2 in. Dia, this backwash hose fits most 2 in. fittings and is recommended to use with a standard hose clamp sold separately
- Made from extruded vinyl, this material is durable, uv and chemically resistant
- Flexible in nature, the hose easily rolls out for use and rolls up for storage
- Important Tip: Vinyl products can become stiff in the cold; to help the hose become more pliable for fitting, lay the hose out in the sun or run the end under warm water; for more tips, scroll down to view the important tips pdf
- TIP #2 - If the hose is stiff or cold, leave out in the sun to help make it more pliable before use
- TIP #3 - After use, roll up the hose and store in a dry place out of direct sunlight
- TIP #4 - Please contact our CS department at (800) 854-1492
Skimmer Weir Flap Door Assembly. Size is 8-3/8 in. W. Pull cord releases spring loaded tabs when in position.
- Replacement for the Rainbow model number R240067
- Traps and keeps leaves and debris in the skimmer
- Spring loaded - replacement
RAMUC -- 1 gallon. Low film build epoxy coating easy application & excellent coverage rates. Protects previously painted epoxy or unpainted surfaces. High gloss, tile-like finish. Chemical resistant, self priming, two-coat system. Use on concrete, plaster, fiberglass, & reflecting pools, & spas . White. Min. Order: 1 EA
The Everbilt 1HP pool pump has been designed for use with permanently installed swimming pools only. A permanently installed pool is constructed in or on the ground, or in a building and is not intended to be disassembled or moved. The pump is designed to accept 1 in. suction piping. The 11/5/230-Volt single phase motor is factory pre-wired to 230-Volt. The ring and cover can be easily removed to clean leaves and debris from the basket.
- Everbilt model PCP10002
- Used with permanently installed in-ground or above-ground pool pumps
- 115-Volt/230-Volt operation
- 1-year warranty
RAMUC -- Gallon. Apply over most previously painted pool surfaces & in damp environments. Excellent solution when short down-time is critical. Self priming, two-coat system. Adheres best on a cool, damp (not wet), & extremely clean surface. Not for fiberglass/gelcoat pools and spas. Dawn Blue. Min. Order: 1 EA
PoolStyle PS035 Classic series leaf rake. Leaf Rake has a Poly frame. Classic Series Blue leaf rake.
- PoolStyle, PS035
- Classic series leaf rake
- Poly frame
Brush is 18 in. Made with quality Stainless Steel Bristles. Perfect For removing Algae on Plaster Surfaces.
- Snap adapt handle fits most poles
- Can be used on plaster, concrete, and gunite pools
- Not for use with vinyl liners pools
- Color of the brush head is blue