Searched for "SENTINEL"

KN-COB-LP2 battery operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the door without the batteries being installed. Inside cover of battery door features quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a 10-year life and a 10-year limited warranty.

• Battery operated (2AAs included) provides protection during power outage
• Low battery hush - silences low battery chirp warning for up to 12-hour in order to maintain protection without having to replace the batteries at an inconvenient time
• Battery lockout system deters covering battery compartment without installation of batteries
• Test/reset button tests the unit for proper operation resets the carbon monoxide alarm
• Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part KN-COB-LP2

Sentinel i12060A is an AC/DC powered, ionization smoke alarm that operates on a 120-Volt power source with 9-Volt battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.

• Front battery pull tab allows battery activation without removing alarm from mounting bracket
• Tamper resist locking feature deters alarm theft
• Battery backup provides protection in case of power failure
• Interconnect able with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms, see users guide for complete instructions
• Smoke detectors utilize an ionization sensor to detect fire hazards and sound an 85 db alarm when a hazard is detected
• UL/CSFM Ref. Kidde Part i12060

i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The 4 in. unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9-Volt battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.

• Battery operated (9-Volt battery included) easy installation and provides continuous protection even during power outages
• Test button tests unit is electronic circuitry, horn and battery function
• Low battery indicator low battery warning chirp alerts user to change battery
• Discreet design 4 in. diameter
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9050

This Kidde 10-Year smoke detector is easy to install and alerts your family when fire or smoke is detected in your home. Smoke alarms should be placed outside each sleeping area and on every level of the home. This alarm is powered by a 10-Year sealed-in, non-replaceable long life lithium battery. No hardwire installation required and no need to change the batteries over the 10-year life of the alarm. Simply replace the entire unit after 10-years.

• Smoke detectors should be installed in a central location outside each sleeping area, on every level of the home, and in other locations where required by law
• 10-year lithium-ion battery is sealed into the alarm and cannot be removed, preventing unwanted tampering and ensuring your alarm is always on
• No hardwire installation required
• Smart hush feature temporarily silences nuisance alarms
• Never replace a battery during the 10-year life of the alarm
• No low battery chirps, internal timer alerts you to replace the entire unit after 10-years
• Alarm is equipped with test/reset button which tests the alarms circuitry and horn and resets memory after an alarm has sounded
• Alarm will automatically activate when attached to the mounting bracket
• Green LED light indicates that the alarm is working properly
• Alarms utilize an ionization Sensor technology, ionization sensing alarms may detect invisible fire particles (associated with fast-flaming fires) sooner than photoelectric alarms
• 10-year limited warranty
• Smoke detector utilizes an ionization sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• UL/CSFM reference model i9010

The Sentinel Combination Carbon Monoxide and Smoke Alarm provides 2 important safety devices in a single unit. This alarm includes a voice warning system that announces Fire, Carbon Monoxide, Low Battery and Smart Hush Activation. The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur.

• Voice alarm announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected; alarm announces fire; when a smoke or fire hazard is detected and announces warning carbon monoxide when a CO hazard is detected
• Combined carbon monoxide and smoke alarm a single unit can be installed where previously, 2 were needed; reduces installation time and helps to keep home decor attractive
• Test/reset button tests alarm circuitry and triggers the voice announcement
• Low battery warning the unit warns of a low battery condition by announcing low battery and by initiating an alarm chirp and activating a flashing red led
• UL/CSFM Ref. 900-0102A
• Smoke and carbon monoxide detector utilize ionization and photoelectric sensors to detect fire hazards and sounds an 85dB alarm when a hazard is detected
• UL/CSFM reference model KN-COSM-B

The Speakman RPG05-0718 is a Mark II bonnet repair kit that fits most Speakman shower valves. Kit contains 1 bonnet, screws and O-ring. Shower valve cap is constructed of plastic and is covered by a 1-year limited warranty.

• Speakman genuine part
• Replacement bonnet repair kit for Speakman shower valves
• Fits most of the SM-XXXX series shower valves, CPV-P-DV, CPV-P-IS, and CPV-3000 shower valve
• Includes 1 bonnet, screws and O-ring
• Plastic construction
• 1-year limited warranty

The Speakman RPG04-0296-PC is a replacement lever handle for the Speakman Mark II shower valves. Lever handle fits Speakman Royal (SR-1XXX) and Regency (SM-1XXX) Mark II showers. Handle is constructed of brass and is covered by a 1-year limited warranty.

• Speakman genuine part
• Replacement lever handle
• Fits Speakman royal (SR-1XXX) and the regency (SM-1XXX) Mark II shower valves
• Includes 1 handle
• Brass construction
• 1-year limited warranty

The Speakman Sentinel Mark II Shower Valve line is designed to provide high quality anti-scald pressure balanced protection. Speakman Sentinel Mark II Valves feature an independent center sleeve which allows up to 1 in. of roughing in variation. Temperature can be adjusted through the temperature limit stops and the valves have a ceramic temperature regulating module. Sentinel Mark II valves feature polished chrome plated brass trim with a metal index plate. Sentinel Mark II valves provide superior protection down to 2.0 GPM. The SM-3000 features a lever handle for easy operation.

• 4 port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2 in. NPT female
• Vandal resistant
• Includes 1/2 in. pipe plug and rough-in template
• Meets ASSE 1016 and ASME A112.18.1/CSA B125.1
• Chrome plated metal trim plate and lever handle
• Adjustable temperature limit stop

Speakman Slv-3050 Sentinel Mark Ii Trim Shower And Tub Package. Required Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes valve trim, hand shower with mounting post and shower hose, 30" slide bar and tub spout. 69" stainless steel hose. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3050

• Required Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes valve trim, hand shower with mounting post and shower hose, 30" slide bar and tub spout

Speakman Slv-3030 Sentinel Mark Ii Trim Shower And Tub Combination 2.0 Gpm. Required Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes valve trim, anystream shower head, shower arm and flange, and diverter tub spout. 2.0 GPM shower head. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3030

• Required Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes valve trim, anystream shower head, shower arm and flange, and diverter tub spout

Speakman Sentinel Mark Ii Sm-3060 Commercial Shower Combination. Includes Vs-1000-Af Hand Shower, S-124 42 In. Slide Bar, S-2272-E2 Showerhead And S-2500 Arm And Flange & S-1183 Diverter Valve. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3060

• Includes Vs-1000-Af Hand Shower, S-124 42 In. Slide Bar, S-2272-E2 Showerhead And S-2500 Arm And Flange & S-1183 Diverter Valve
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop

Speakman Sentinel Mark Ii Sm-3010-Is-2Vr Pressure Balance Valve With Shower Head. Includes S-2252 & S-2500 Arm & Flange. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Integral Stops. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3010-IS-2VR

• Includes S-2252 & S-2500 Arm & Flange
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop

Speakman Slv-3460 Sentinel Mark Ii Diverter Trim And Shower System. Required Diverter Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes valve trim, transfer valve trim, fixed shower head, hand held shower with mounting post and hose, 42-in. slide bar, and shower arm and flange. 69" stainless steel hose. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3460

• Required Diverter Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes valve trim, transfer valve trim, fixed shower head, hand held shower with mounting post and hose, 42-in. slide bar, and shower arm and flange

Speakman Sentinel Mark Ii Sm-3060-Is-1 Commercial Shower Combination. Includes S-2251 Shower Head And Vs-100-Pc Hand Shower. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Integral Stops. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3060-IS-1

• Includes S-2251 Shower Head And Vs-100-Pc Hand Shower
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop

Speakman Slv-3040 Sentinel Mark Ii Trim And Shower Package. Required Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes valve trim, hand shower with mounting post and shower hose, and 30" slide bar. 2.0 GPM shower head. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3040

• Required Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes valve trim, hand shower with mounting post and shower hose, and 30" slide bar

Speakman Slv-3450 Sentinel Mark Ii Diverter Trim Shower And Tub Package. Required Diverter Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes diverter valve trim, hand shower with mounting post and shower hose, 30" slide bar and tub spout. 69" stainless steel hose. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3450

• Required Diverter Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes diverter valve trim, hand shower with mounting post and shower hose, 30" slide bar and tub spout

Speakman Slv-3440 Sentinel Mark Ii Diverter Trim And Shower Package. Required Diverter Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes diverter valve trim, hand shower with mounting post and shower hose, and 30" slide bar. 69" stainless steel hose. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3440

• Required Diverter Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes diverter valve trim, hand shower with mounting post and shower hose, and 30" slide bar

Speakman Sentinel Mark Ii Sm-3010-Is-2 Pressure Balance Valve With Shower Head. Includes S-2252 Shower Head & S-2500 Arm & Flange. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Integral Stops. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3010-IS-2

• Includes S-2252 Shower Head & S-2500 Arm & Flange
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop

Speakman Sentinel Mark Ii Diverter Trim Shower And Tub Combination 2.0 Gpm. Required Diverter Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes diverter valve trim, anystream shower head, shower arm and flange, and tub spout. 2.0 GPM shower head. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3430

• Required Diverter Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes diverter valve trim, anystream shower head, shower arm and flange, and tub spout

Speakman Slv-3470 Sentinel Mark Ii Diverter Trim Shower And Tub System. Required Diverter Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes diverter valve trim, fixed shower head, hand held shower with mounting post and hose, shower arm and flange, tub spout, and wall hook. 69" stainless steel hose. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3470

• Required Diverter Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes diverter valve trim, fixed shower head, hand held shower with mounting post and hose, shower arm and flange, tub spout, and wall hook

Speakman Sentinel Mark Ii Sm-3010-Is-Lh Pressure Balance Valve. Includes S-2500 Arm & Flange. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3010-IS-LH

• Includes S-2500 Arm & Flange
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop

Speakman Slv-3410 Sentinel Mark Ii Diverter Trim And Shower Combination 2.0 Gpm. Required Diverter Valve Not Included. For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types. Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807. Includes valve trim, anystream shower head, shower arm and flange. 2.0 GPM shower head. Easily installs into standard U.S. plumbing connections. Mfg #SLV-3410

• Required Diverter Valve Not Included
• For use with Speakman Pressure Balancing or Thermostatic Diverter Valves in three connection types
• Valve connection types: Sweat and Thread, PEX F1960 Cold-Expansion, or PEX F1807
• Includes valve trim, anystream shower head, shower arm and flange

Speakman Sentinel Mark Ii Sm-3010-Lh Pressure Balance Valve With Shower Arm. Includes S-2500 Arm & Flange. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3010-LH

• Includes S-2500 Arm & Flange
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop

Speakman Sentinel Mark Ii Sm-3070-Is Pressure Balance Valve Shower Combination. Includes Vs-1000-Af Hand Shower, S-124 42 In. Slide Bar, S-2272-E2 Showerhead, S-2500 Arm And Flange, S1556 Diverter Tub Spout & S-1183 Diverter Valve. Four port valve with 1/2 in. female copper sweat inlets and shower outlet. Tub outlet is 1/2" NPT female. Adjustable temperature limit stop. Integral Stops. Meets ASSE 1016 & ASME A112.18.1/CSA B125.1. Mfg #SM-3070-IS

• Includes Vs-1000-Af Hand Shower, S-124 42 In. Slide Bar, S-2272-E2 Showerhead, S-2500 Arm And Flange, S1556 Diverter Tub Spout & S-1183 Diverter Valve
• Four port valve with 1/2 in. female copper sweat inlets and shower outlet
• Tub outlet is 1/2" NPT female
• Adjustable temperature limit stop