Searched for "klein tools"

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

• GFCI Outlet Tester detects the most common wiring problems in standard and GFCI receptacles
• Electrical outlet tester works on GFCI outlets and confirms operation of the ground fault protective device
• Built to withstand a 6.6 ft. (2 m) drop
• Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
• Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

This compact, lightweight wire stripper and cutter cleanly cuts solid and stranded copper wire. Strong-gripping serrated nose for easy bending, shaping, and pulling of wire. Handles are double-dipped for comfortable grip. Curved handles help reach into confined areas.

• Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 screws
• Precision ground stripping holes
• Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
• Holes for looping and bending wire
• Made in USA
• Shear-type cutting blades for clean cuts
• Double-dipped comfort grips with curved handles
• Coil spring provides fast self-opening action
• Easy-to-read markings
• Handy closure lock for convenient storage
• Made in USA

The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.

• Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
• Detects voltage with simultaneous visual and audible voltage indicators
• Bright flashlight illuminates work area and may be used independent of voltage detection function
• Green light indicates no voltage
• Lightweight, compact tool with pocket clip provides convenient storage and quick access
• Auto power-off feature conserves and extends battery life
• CAT IV 1000V rating provides expanded operation and protection
• Screw-thread battery cap with O-ring ensures protection against dust and water ingress
• 6.6 ft. (2 m) drop protection
• IP67: Dustproof and waterproof
• Conforms to CE requirements
• US Patent 10,073,142, D750,985 and other patents pending

The Klein 10-in-1 Multi-Bit Screwdriver / Nut Driver has the bits to handle your most common tasks. From Phillips or Slotted to Square and TORX, these tips are precision-machined for an exact fit. The internal flanges inside the handle provide solid, twist-resistant blade anchor. A Cushion-Grip handle for greater torque and comfort helps you get the job done fast.

• Multi-Bit Screwdriver / Nut Driver shaft holds 8 popular tips and converts to 2 nut driver sizes
• Interchangeable blade for quick and easy switch out
• End of handle is marked to quickly identify tool
• Cushion-Grip handle for greater torque and comfort
• Includes 5/16 in. and 1/4 in. (8 and 6 mm) nut driver sizes
• Features 1, 2 Phillips; 1/4 in. and 3/16 in. (6 and 5 mm) Slotted; T10, T15 TORX; and 1, 2 Square-Recess bits
• TORX is a registered trademark of Acument Intellectual Properties, LLC

This Wire Stripper Long-Nose Multi Tool cuts and strips 10-20 AWG solid and 12-22 AWG stranded wire as well as crimps insulated and non-insulated connectors. The tip is designed to grab, pull and bend wires. It is optimized for ideal leverage when cutting and crimping. Precision shear-type blades make cutting easier.

• Wire Stripper strips 10-20 AWG solid, 12-22 AWG stranded wire
• Multi Tool crimps insulated and non-insulated connectors
• Tip designed to grab, pull and bend the smallest of wires
• Reinforced head reduces flex; optimized for ideal leverage when stripping and crimping
• Made in USA
• Precision shear-type cutting blades for easier cutting
• Do not use to cut steel wire
• Patent US D827,403

The full hollow shaft design facilitates work on stacked circuit boards or other long bolt or stud applications. Klein's exclusive Cushion-Grip handle offers greater torque and outstanding comfort. The patented Tip- Ident quickly identifies nut driver and size.

• Reaches into deep recesses and fits over extra-long bolts and studs
• Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
• Internal flanges provide solid, twist-resistant shaft anchor
• Premium chrome plated for smooth feel and corrosion resistance
• Made in USA
• Meets or exceeds applicable ASME / ANSI specifications
• Handle end is also color coded for easy identification
• Cushion-Grip handle allows for greater torque and comfort
• Tip-Ident quickly identifies nut driver and size

No need to worry about lost hex keys with Klein Tools 8-Key Folding Hex Key Set. This handy tool features 8 different size hex keys in a convenient folding tool that fits easily into your pocket or tool box. The hex ends are square-cut so they fit securely into hex sockets.

• Folding Hex Keys with two key positions (straight-out or right angle) for extra leverage
• Hex ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
• Handy sets fit in your pocket or tool box easily and help eliminate the lost key problem
• Includes 8 hex key sizes: 1/20 in., 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in. and 5/32 in.
• Made in USA
• 2 key positions - straight-out or right angle for extra leverage
• Folding hex key system

This Magnetic Nut Driver set from Klein Tools features two of the most frequently used nut driver sizes. They feature full 6-Inch (15 cm) hollow shafts that fit easily over extra-long bolts and studs. The handle end is also color coded to easily identify the nut drivers in a tool bag or pouch.

• Tool Set includes general purpose selection of the most frequently used nut drivers (Cat. Nos. 646-1/4M and 646-5/16M)
• Full-hollow shaft design with Rare-Earth magnetic tip facilitates work on bolt applications
• Handle end is color-coded for easy identification
• Internal flanges provide solid, twist-resistant shank anchor
• Made in USA
• Cushion-Grip handle allows for greater torque and comfort
• Color-coded for easy identification

No need to worry about lost hex keys with Klein Tools Folding Hex Key Set. This handy tool features 9 different size hex keys in a convenient folding tool that fits easily into your pocket or tool box. The hex ends are square-cut so they fit securely into hex sockets.

• Folding Hex Keys with two key positions (straight-out or right angle) for extra leverage
• Hex ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
• Handy sets fit in your pocket or tool box easily and help eliminate the lost key problem
• Includes nine-key set sizes: 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in. and 1/4 in.
• Made in USA
• 9 key set
• Sizes: 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in. and 1/4 in.

These Long-Nose Side-Cutters are made of forged steel for durability. The long nose is great for grabbing and looping wire. Cutting knives are induction hardened for long life. Knurled jaws provide sure wrapping and looping.

• Needle Nose Pliers with induction-hardened cutting knives for long life
• Knurled jaws for sure wrapping and looping
• Slim head design for working in confined areas
• Hot-riveted joint ensures smooth action and no handle wobble
• Forged in the USA with custom, US-made tool steel for maximum durability
• Curved handles provide greater tool control
• Plastic-dipped handles for comfort and ease of identification

The screwdrivers in Klein Tools' 2-Piece Insulated Screwdriver set have two layers of insulation to protect from electric shock. A thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool, while a bright orange outer coating is flame and impact resistant. Klein insulated tools exceed the IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol.

• Screwdriver Set includes one 1/4-Inch Cabinet-Tip (Cat. No. 602-4-INS) and one #2 Phillips-Tip (Cat. No. 603-4-INS)
• Insulated screwdrivers reduce risk with work up to 1000 volts
• Durable, two-layer, molded insulation
• Orange outer coating is flame and impact resistant; white high-dielectric inner coating is bonded to the steel
• Made in USA
• Cushion-Grip handles for greater torque and comfort
• Meets or exceeds IEC 60900 and ASTM F1505 standards for insulation
• Includes non-magnetic tips

These Diagonal-Cutting Pliers have a high-leverage design to provide 36-Percent greater cutting power than other pliers. The hot-riveted joint ensures smooth action with no handle wobble. Klein Tools specializes in making some of the world's finest pliers.

• Pliers with high-leverage design, with rivet closer to the cutting edge for 36-percent greater cutting power than other plier designs
• Short jaws and beveled cutting edges permit close cutting of wire
• Induction-hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Made in USA with Custom, US-made tool steel
• Plastic-dipped handles for comfort and ease of identification

This compact, lightweight wire-stripping and cutting tool is designed to cut 10 - 18 AWG solid wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places.

• Cuts, strips, loops and gauges 10-18 AWG solid wire
• Spring-loaded action for self-opening
• Easy-to-read wire gauge markings on both sides for stripping in either direction
• Hardened steel with precision ground stripping holes and wire looping and bending holes
• Made in USA
• Black-oxide finish resists corrosion
• Textured handles provide a firm, comfortable grip
• Color-coded handles: red indicates stranded wire, yellow indicates solid wire
• Shear-type cutting blades for clean cuts

This 7-Piece Klein Tools Screwdriver Set contains the most frequently used, general purpose screwdrivers. Included are three cabinet-tip, two Phillips-tip, and two keystone-tip style screwdrivers. Each screwdriver features Klein's patented Tip-Ident which allows quick identification of the type of screwdriver and tip orientation.

• These screwdrivers are a general-purpose selection of the most frequently used screwdriver tips and sizes
• Screwdriver Set includes three cabinet-tip, two Phillips-tip and two keystone-tip styles
• Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
• Internal flanges inside handle provide solid, twist-resistant blade anchor
• Made in USA
• Special heat-treated shafts
• Precision-machined tip for exact fit
• Meets or exceeds applicable ASME / ANSI specifications
• Tip-Ident quickly identifies the screwdriver type and tip orientation

Klein Tools Nut Driver Set contains the type of nut drivers professionals carry most often. Each nut driver in this 7-piece set features a full hollow shaft for work on stacked circuit boards or other long bolt applications. Klein's patented Cushion-Grip handle provides greater torque and comfort.

• Tool Set includes general purpose selection of the most frequently used nut drivers
• Nut Drivers' 6 in. (15 cm) full hollow shaft facilitates work on long bolt applications
• Set contains Klein Cat. Nos. 646-3/16, 646-1/4, 646-5/16, 646-11/32, 646-3/8, 646-7/16 and 630-1/2 nut drivers
• Cushion-Grip handles allow for greater torque and comfort
• Made in USA
• Shafts are chrome-plated for smooth feel and corrosion resistance
• Internal flanges provide solid, twist-resistant shaft anchor

This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.

• This cutting, stripping, and crimping tool cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire with built-in, knife-type wire cutter
• Wire Stripper cleanly shears machine screws
• Measures machine screw sizes and gauges wire sizes
• Crimps insulated terminals and connectors
• Made in USA
• Plastic covered handles for comfort
• Crimps insulated terminals

Cushion-Grip handle allows for greater torque and comfort. Integral flanges inside handle provide solid, twist resistant blade anchor. Special heat treated shafts. Precision machined tip for exact fit. Premium chrome plated for smooth feel and corrosion resistance. Patented Tip Ident quickly identifies the type of screwdriver and screwdriver tip orientation. Meets or exceeds applicable ASME / ANSI specifications. No. 2 Phillips with 4 in. shank.

• Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to accurately fit and torque without slippage
• Tip-Ident quickly identifies the screwdriver type and tip orientation and Cushion-Grip handle for greater torque and comfort
• Premium chrome-plated for smooth feel and corrosion resistance
• Internal flanges inside handle provide solid, twist-resistant blade anchor
• Made in USA
• Special heat-treated shafts
• Meets or exceeds applicable ASME / ANSI specifications

This versatile 11-in-1 multi-tool has everything the professional needs. The integrated screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for quick and easy switch out. The Cushion-Gripâ„¢ handle allows for greater torque and comfort. You'll be reaching for this tool to meet your needs on the job.

• Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes
• Includes industrial strength heat treated bits: 3/8 in., 5/16 in. and 1/4 in. nut drivers, 1 and 2 Phillips, 1/4 in. and 3/16 in. slotted, T10 and T15 TORX, and 1 and 2 square recess
• Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle
• Blast finish bit tips provide a firm hold and reduce cam-out
• The following replacement bits are available: see Cat. No. 32482 (1 Phillips and 3/16 in. Slotted), Cat. No. 32483 (2 Phillips and 1/4 in. Slotted), Cat. No. 32484 (1 Square and 2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)
• TORX is a registered trademark of Acument Intellectual Properties, LLC

The Klein Tools Crimping and Cutting Tool crimps both insulated and non-insulated 10-22 AWG terminals and connectors. The tapered nose which is great when working in tight spaces. The wire cutter in the nose specially hardened for long life.

• Crimper crimps 10 to 22 AWG insulated and non-insulated terminals
• Cutting and Crimping Tool has specially hardened wire cutter in nose
• Tapered nose design for working in confined spaces
• Crimping die marked for insulated and non-insulated solderless terminals and connectors
• Made in USA
• Plastic-dipped, cushioned handles for comfort

The Klein Tools 9 in. Torpedo Level features a highly visible orange body with a rugged aluminum exterior that is easy to find in the clutter of jobsites or home projects. The large vials and windows combine to make a level that is exceptionally easy to read in many different projects, from carpentry to plumbing, and more. The magnetic base is powerful and secures to any magnetic surface. The included V-groove allows the level to snugly fit onto conduit, pipe, railings, and any other round surface.

• Level's patented magnet track secures the level to any metal surface
• Large, easy-to-read high-visibility vials at 3 angles: level, 90 and 45 degrees
• Large, top-view vial window enables easy readability from multiple angles
• High-visibility orange body is easy to see on conduit and at the jobsite
• V-Groove fits contour of conduit and pipe
• Made from aluminum for added durability
• US Patent 9,964,407

The Klein Tools MM600 Multimeter is an automatically ranging digital multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, test diodes and continuity. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

• Multimeter measures up to 1000V AC/DC voltage, 10A AC/DC current and 40MOhms resistance plus temperature, capacitance, frequency, duty-cycle, test diodes and continuity
• Digital Multimeter has CAT IV 600V / CAT III 1000V safety rating
• Built to endure a 6.6-foot (2 m) drop and withstand daily wear and tear on the job site
• Low battery indicator and easily accessible battery and fuse replacement compartment
• For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations
• Includes carrying pouch, test leads, alligator clips, thermocouple with adapter and batteries
• Operating altitude to 6,562 ft. (2,000 m)
• Included accessories: carrying pouch, test leads, alligator clips, thermocouple with adapter, batteries

Klein Hex Keys are designed for a precise fit in sockets, preventing slippage and stripping of the socket. Works well in versatile applications such as hard to reach spaces or high-torque situations. Manufactured with top-grade alloy steel and rust/corrosion resistant surfaces for added durability.

• Hex Key with long side for accessing hard-to-reach places
• Short side for higher torque situations and low clearances
• Rust and corrosion resistant surfaces
• Manufactured with top-grade alloy steel
• Made in USA
• 5-pack
• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

The Klein Tools #2 Insulated Phillips Head Screwdriver provides safe electrical insulation up to 1,000-Volt. This screwdriver features 2 layers of insulation around a steel construction to ensure dielectric protection and impact resistance. Cushion-Grip handle ensures excellent torque and comfort.

• 1000V rated for safety
• Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
• Cushion-Grip handles for greater torque and comfort
• Custom US-made steel
• Made in USA

The All-Purpose Pliers combine the features of a wire stripper and long-nose pliers in one. This tool can cut, strip and loop 8-16 AWG solid and 10-18 AWG stranded wire. The long nose is great for grabbing and looping wire. It also has shearing holes for 6-32 and 8-32 screws, and is spring loaded for self-opening action.

• Combination Pliers Strip and cut 8-16 AWG solid and 10-18 AWG stranded wire
• Long nose for extended reach, grabbing and looping wire, and indiction-hardened cutting knives for hard wire
• 6-32 and 8-32 screw shearing
• Hot-riveted joint ensures smooth action with no handle wobble
• Made in USA
• Forged steel for maximum durability
• Spring-loaded for self-opening action
• Dual material Journeyman handles provide better grip