MEC Full Port 1-1/4 in. FPT globe valve
Product Overview
All Marshall Excelsior globe and angle valves are designed to withstand extreme temperatures and can increase flow up to 70 % over a standard globe valve. The 35 seat angle on the 1-1/4 and larger globe valves make them ergonomically designed for bobtail, transport and bulk plant applications. This 35 seat angle also allows up to 70 % more ow. All 1-1/4 and larger globe and angle valves come with an upstream and downstream plugged port. The boss of these ports are large enough to drill and tap a 3/4 FNPT hole for a jumper line or standard by-pass valve. These valves are mainly used in piping systems to control liquid or vapor ow in bulk plants, bobtails, transports, pumps or compressors. Globe valves are designed to be installed in a straight section of piping and angle valves are designed to be installed when a 90 directional change is needed in the piping.
- All stainless steel internal components with rotating seat disc design and V-cup Teflon packing stem seals
- Double stem seal design ensures leak free operation
- Rated for 400 WOG
- Operating temperature 40 to +212 degree F
Proposition 65 Information
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm - https://www.p65warnings.ca.gov/chemicals/lead-and-lead-compounds
Documentation
Assembly InstructionsSpecifications
Warranty
5 years from manufacture date