MEC Qcc Connector 1-5/16 in. F-Acme x 1/4 in. Hosebarb with Excess Flow 200,000 BTU
Related Items
Cavagna HIGH PRESSURE GAS HOSE 1/4" X 100 FT.
Item # PH14
Log in to see your price and availability
Cavagna 4 in. Type 1 ACME 20 lb. Cylinder Valve with Overfill Prevention Device
Item # 108413
Low Pressure Regulator with Type 1 Acme Fitting
Item # 1107A
High Pressure LP Propane Gas Regulator
Item # 512001
MEC QCC x Softnose Pol Adapter
Item # 511899
Log in to see your price and availability
Product Overview
The Type I (QCC) connectors (ME517, ME518 and ME519 Series) are designed with a built-in excess ow feature and a positive shutoff that will not allow gas to ow until the connector is fully engaged. In case of a fire the built-in thermal protection on the QCC connector melts allowing the nipple to disengage from the tank connection and stop the ow of propane. These QCC connectors also provide a positive back check seal at disconnect to eliminate the propane in the hose from being released into the atmosphere.
- Inlet: 1-5/16 in. female acme
- Flow capacity: 100 SCFH air/200,000 BTUH
- Thermal protection
- 1/4 in. hose barb
Proposition 65 Information
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm - https://www.p65warnings.ca.gov/chemicals/lead-and-lead-compounds
Documentation
Owner's ManualSpecifications
Warranty
5 years after date of manufacture