RIDGID K-60SP-SE Sectional Machine for 1-1/4 in. to 4 in. Drain Lines

Product Overview

The RIDGID K-60SP is a portable Drain Cleaning Machine designed to clean 1-1/4 in. to 4 in. drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. A rear handle allows for transporting up ladders and cleaning roof-top vent stacks. The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built-into the line cord. A toggle switch provides For/Off/Reverse control of the motor.

• Includes: machine with A-1 operators mitt, A-12 pin key, straight auger, funnel auger, spade cutter, retrieving auger and shark tooth cutter, A-62 cable kit containing five 15 ft. sections of 7/8 in. cable and cable carrier
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control
• Remove only 2 bolts to access jaw set for cleaning or replacement, removal of same bolts provides access to belt drive
• Equipped with 1/2 HP motor
• Simple adjustment knob allows unit to spin both 7/8 in. (22 mm) and 5/8 in. (16 mm) Dia cable, adjusts in seconds
• Clears 1-1/4 in. to 4 in. (32 mm to 100 mm) drain lines
• Ideal for rooftop vent stacks, rear handle allows for easy transporting up ladders and onto rooftops

Specifications

Warranty

Limited Lifetime Warranty