MEC Excess Flow Pol Adapter 7/8 in. Hex Nut 1/4 in. Mpt
Related Items
Low Pressure Regulator 3/8 in. NPT Female Outlet
Item # 1107
Cavagna HIGH PRESSURE GAS HOSE 1/4" X 100 FT.
Item # PH14
Log in to see your price and availability
1/4 in. x 1/4 in. FIP Brass Hose Barb Adapter
Item # 391544
MEC Pol with Handwheel 1/4 in. Barb
Item # G1656
Log in to see your price and availability
Product Overview
The ME1690 Pol adapters 1/4 in. male pipe fitting fits the inlet of all standard low pressure regulators. The Pol nut features a left hand thread and fits all standard LP gas cylinder valves. The excess flow Pol is different than standard POL fittings because it has a check valve inside. If gas surges through the fitting, the check valve will check. It does not shut off the gas but it does restrict the gas flow. Should an accident occur that would break the fitting off ahead of the regulator, or sever the hose the check valve would safety restrict the flow of escaping gas.
- Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
- Machined of solid brass
- 7/8 in. Hex nut
- 1/4 in. MNPT
- Excess flow Pol
- Caution: when installing the 1/4 in. male NPT into regulator inlet, it is recommended that teflon tape be used instead of the thread sealant, If thread sealant is used, extreme caution should be taken that no thread sealant that no thread sealant gets in the regulator inlet
Proposition 65 Information
WARNING: These products contain a chemical known to the state of California to cause cancer and birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov/chemicals
Specifications
Warranty
5 years from manufacture date